Product Specifications - Cisco RVS4000 Datasheet
4-port gigabit security router: vpn
Hide thumbs
Also See for RVS4000:
- Administration manual (195 pages) ,
- User manual (83 pages) ,
- Quick start manual (2 pages)
Advertisement
Optional Trend Micro ProtectLink Gateway Security Service: This optional hosted service adds another
●
layer of protection to your network by scanning email and websites to help fight spam, virus, web threats, and
data leakage, without the drain on your office PCs caused by traditional security solutions.
Improved traffic flow and network management: Flexible, built-in support for up to four 802.1Q virtual LAN
●
(VLAN) connections enable separation of network traffic to help improve traffic flow and overall network
management while enabling the RVS4000 to interoperate with other VLAN-capable switches (Figure 2).
Figure 2.
Product Specifications
Table 1 lists the basic product specifications for the RVS4000 Gigabit Security Router.
Table 1.
Feature
Routing
Layer 2
Network
IPv6
Security
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Cisco RVS4000 Gigabit Security Router Port Connections
Product Specifications
Description
● Static routing
● Routing Information Protocol (RIPv1 and RIPv2)
● Inter-VLAN routing
● Port-based and 802.1Q tag-based VLANs
● 4 active VLANs (4094 range)
● One of five WAN/LAN ports can be mirrored to a selected LAN port
● Supports Rapid Spanning Tree Protocol (RSTP) for loop detection and faster reconfiguration
● Dynamic Host Configuration Protocol (DHCP) Server, DHCP Client, DHCP Relay Agent
● DHCP Server supports static IP address based on MAC address
● Domain Name System (DNS) Relay, Dynamic DNS (DynDNS, TZO)
● Network Address Translation (NAT): Port Address Translation (PAT), Network Address Port Translation (NAPT),
Session Initial Protocol (SIP) Application Layer Gateway (ALG) support, NAT traversal
● Network edge software configurable on any IP address
● Dual-stack IPv4 and IPv6
● 6 to 4
● Stateless address auto-configuration
● DHCP v6
● Intra Module Command Protocol (IMCP) v6
Access Control
● MAC-based, IP-based access control list (ACL)
Firewall
● SPI firewall
Content Filtering
● Static URL blocking or keyword blocking (included)
● Dynamic filtering through Trend Micro ProtectLink Gateway Security Service (optional)
Intrusion Prevention System (IPS)
● IP sweep detection
● Application anomaly detection (HTTP, FTP, Telnet, Remote Copy Protocol [RCP])
● Peer-to-peer control
● Instant messenger control
● Layer 3/Layer 4 protocol (IP, TCP, User Datagram Protocol [UDP], Internet Control Message Protocol [ICMP])
normalization
Data Sheet
Page 2 of 4
Advertisement
