Related Manuals for Dell S2422HZ
Summary of Contents for Dell S2422HZ
- Page 1 Dell S2422HZ/S2722DZ Video Conferencing Monitor User’s Guide Monitor Model: S2422HZ/S2722DZ Regulatory Model: S2422HZt/S2722DZt...
- Page 2 WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
-
Page 3: Table Of Contents
Contents Safety instructions......5 About your monitor ......6 Package contents . - Page 4 FCC notices (U.S. only) and other regulatory information . . . 80 Contacting Dell ......80 EU product database for energy label and product information sheet .
-
Page 5: Safety Instructions
Safety instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, or mechanical hazards. • Place the monitor on a solid surface and handle it carefully. The screen is fragile and can be damaged if dropped or pressed sharply. -
Page 6: About Your Monitor
About your monitor Package contents Your monitor is shipped with components that are shown in the following table. If any component is missing, contact Dell. For more information, see Contact Dell. NOTE: Some components may be optional and may not ship with your monitor. -
Page 7: Product Features
The Dell S2422HZ/S2722DZ monitor has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD), and LED backlight. The monitor features include: • S2422HZ: 60.47 cm (23.8 in.) active area display (measured diagonally) 1920 x 1080 (16:9) resolution, plus full-screen support for lower resolutions. -
Page 8: Identifying Parts And Controls
Identifying parts and controls Front view Label Description RGB Webcam With image sensor capable of operating at up to 30 fps in 10 bits 5M resolution with complete user control over image quality, formatting and output data transfer. Transmits your image in a video conference. IR Webcam Capture and Transmits image in dark light. -
Page 9: Back View
Lists the regulatory approvals. Stand release button Releases stand from the monitor. Barcode, serial number, and See this label if you have to contact Dell Service Tag label for technical support. The Service Tag is a unique alphanumeric identifier that enables... -
Page 10: Bottom View
DisplayPort following, and PD 20 V/3.25 A, 15 V/3 A, 9 V/3 A, 5 V/3 A. • S2422HZ maximum resolution of 1920 x 1080 at 75 Hz • S2722DZ maximum resolution of 2560 x 1440 at 75 Hz NOTE: USB-C is not supported on Windows versions that are prior to Windows 10. -
Page 11: Monitor Specifications
Monitor specifications Model S2422HZ S2722DZ Screen type Active matrix - TFT LCD Panel type In-plane switching technology Aspect ratio 16:9 Viewable image dimensions: Diagonal 604.70 mm (23.80 in.) 684.70 mm (27.00 in.) Active area: Horizontal 527.04 mm (20.75 in.) 596.74 mm (23.49 in.) Vertical 296.46 mm (11.67 in.) -
Page 12: Resolution Specifications
-5° to 21° Swivel -30° to 30° Pivot -90° to 90° Cable management Dell Display Easy Arrange and other key features Manager (DDM) compatibility Security Security lock slot (cable lock sold separately) At panel native only, under Custom Mode preset. -
Page 13: Preset Display Modes
Preset display modes S2422HZ Display mode Horizontal Vertical Pixel Sync polarity frequency frequency clock (Horizontal/ (kHz) (Hz) (MHz) Vertical) VESA, 640 x 480 31.47 59.94 25.18 VESA, 640 x 480 37.50 75.00 31.5 VESA, 720 x 400 31.47 70.08 28.32 VESA, 800 x 600 37.88... - Page 14 S2722DZ Display mode Horizontal Vertical Pixel clock Sync frequency frequency (MHz) polarity (kHz) (Hz) (Horizontal/ Vertical) VESA, 640 x 480 31.47 59.94 25.18 VESA, 640 x 480 37.50 75.00 31.50 VESA, 720 x 400 31.47 70.08 28.32 VESA, 800 x 600 37.88 60.32 40.00...
-
Page 15: Electrical Specifications
Electrical specifications Model S2422HZ S2722DZ Video input signals • Digital video signal for each differential line Per differential line at 100 ohm impedance • DP/HDMI/USB-C signal input support Input voltage/ 100-240 VAC/ 50 or 60 Hz ± 3 Hz/2 A (maximum) frequency/current... -
Page 16: Webcam Specifications
Interface USB 2.0 High Speed Power supply 3.3 volts +/- 5% for USB 5 volts +/- 5% for IR camera Microphone specifications Model S2422HZ S2722DZ Microphone type Knowles digital microphone x 2 Sensitivity -35dB +/- 1dB Signal to noise ratio... - Page 17 Signal cable type USB 3.2 Gen 1 Type-C to C 1.8 M cable Dimensions (with stand): Height (extended) 488.40 mm (19.23 in.) 510.00 mm (20.08 in.) Height 378.40 mm (14.90 in.) 400.00 mm (15.75 in.) (compressed) Width 537.80 mm (21.17 in.) 611.60 mm (24.08 in.) Depth 174.70 mm (6.88 in.)
-
Page 18: Environmental Characteristics
10% to 80% (non-condensing) Non-operating 5% to 90% (non-condensing) Altitude: Operating 5,000 m (16,404 ft) (maximum) Non-operating 12,192 m (40,000 ft) (maximum) Thermal dissipation: S2422HZ 467.77 BTU/hour (maximum) 43.09 BTU/hour (on mode) S2722DZ 508.75 BTU/hour (maximum) 62.35 BTU/hour (on mode) About your monitor... -
Page 19: Pin Assignments
Pin assignments DP port (in) Pin number 20-pin side of the connected signal cable ML3(n) ML3(p) ML2(n) ML2(p) ML1(n) ML1(p) ML0(n) ML0(p) CONFIG1 CONFIG2 AUX CH (p) AUX CH (n) Hot Plug Detect Return DP_PWR About your monitor... - Page 20 HDMI port Pin number 19-pin side of the connected signal cable TMDS DATA 2+ TMDS DATA 2 SHIELD TMDS DATA 2- TMDS DATA 1+ TMDS DATA 1 SHIELD TMDS DATA 1- TMDS DATA 0+ TMDS DATA 0 SHIELD TMDS DATA 0- TMDS CLOCK+ TMDS CLOCK SHIELD TMDS CLOCK-...
- Page 21 USB-C port Signal Signal SSTXp1 SSRXp1 SSTXn1 SSRXn1 VBUS VBUS SBU2 SBU1 VBUS VBUS SSRXn2 SSTXn2 SSRXp2 SSTXp2 About your monitor...
- Page 22 Universal Serial Bus (USB) This section provides information about the USB ports available on your monitor. NOTE: Up to 2 A on USB downstream port (port with battery icon) with BC 1.2 compliance devices; up to 0.9 A on the other 1 USB downstream ports. Your computer has the following USB ports: • 1 upstream - at rear.
-
Page 23: Plug-And-Play
During the LCD monitor manufacturing process, it is normal for one or more pixels to become fixed in an unchanging state, which are hard to see and do not affect the display quality or usability. For more information about LCD Monitor Pixel Policy, see Dell support site at https://www.dell.com/pixelguidelines About your monitor... -
Page 24: Ergonomics
Ergonomics CAUTION: Improper or prolonged usage of keyboard may result in injury. CAUTION: Viewing the monitor screen for extended periods of time may result in eye strain. For comfort and efficiency, observe the following guidelines when setting up and using your computer workstation: • Position your computer so that the monitor and keyboard are directly in front of you as you work. -
Page 25: Handling And Moving Your Display
• Keep the area under your desk clear of obstructions and cables or power cords that may interfere with comfortable seating or present a potential trip hazard. Monitor screen at or below eye level Monitor and keyboard positioned directly in front of the user Wrists relaxed and at... - Page 26 • When lifting or moving the monitor, ensure that the screen is facing away from you. Do not press on the display area to avoid any scratches or damage. • When transporting the monitor, avoid any sudden shock or vibration to it. • When lifting or moving the monitor, do not turn the monitor upside down while holding the stand base or stand riser.
-
Page 27: Maintenance Guidelines
Maintenance guidelines Cleaning your monitor WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. CAUTION: Read and follow the Safety instructions before cleaning the monitor. For best practices, follow these instructions while unpacking, cleaning, or handling your monitor: • To clean your anti-static screen, lightly dampen a soft, clean cloth with water. -
Page 28: Setting Up The Monitor
Setting up the monitor Connecting the stand NOTE: The stand riser and stand base are detached when the monitor is shipped from the factory. NOTE: The following instructions are applicable only for the stand that is shipped with your monitor. If you are connecting a stand that you purchased from any other source, follow the setup instructions that were included with the stand. - Page 29 4. Open the protective cover on the monitor to access the VESA slot on the monitor. 5. Slide the tabs on the stand riser into the slots on the display back cover and lower the stand assembly to snap it into place. Setting up the monitor...
- Page 30 6. Hold the stand riser and lift the monitor carefully, then place it on a flat surface. NOTE: Hold the stand riser firmly when lifting the monitor to avoid any accidental damage. 7. Lift the protective cover from the monitor. Setting up the monitor...
-
Page 31: Using The Tilt, Swivel, And Vertical Extension
Tilt the display backwards until the maximum to avoid pressing the bottom edge of the display. 90° 90° NOTE: To toggle the display setting on your Dell computer between landscape and portrait when rotating the display, download and install the latest graphics driver. To download, go to https://www.dell.com/support/drivers and search for the appropriate driver. -
Page 32: Configuring The Display Settings On Your Computer After Rotation
After rotating the display, complete the following procedure to configure the display settings on your computer. NOTE: If you are using the monitor with a non-Dell computer, go to the graphics card manufacturer’s website or your computer manufacturer website for information about rotating the contents of your display. -
Page 33: Connecting Your Monitor
4. Select the correct input source from the OSD Menu on your monitor and then turn on your computer. NOTE: S2422HZ/S2722DZ default setting is DisplayPort 1.2. A DisplayPort 1.1 Graphic card may not display normally. Connecting the HDMI cable (optional purchase) - Page 34 Supports USB Power Delivery (PD), with profiles up to 65 W. NOTE: Regardless of the power requirement/actual power consumption of your laptop, or the remaining power runtime in your battery, the Dell monitor is designed to supply power delivery of up to 65 W to your laptop.
-
Page 35: Organizing Your Cables
Organizing your cables After attaching all necessary cables to your monitor and computer, organize all cables as shown in the image. See Connecting your monitor for more information about cable connections. Securing your monitor using Kensington lock (optional) The security lock slot is at the bottom of the monitor. For more information about the location of the security lock slot, see Security lock slot. -
Page 36: Removing The Monitor Stand
Removing the monitor stand CAUTION: To prevent scratches on the LCD screen when removing the stand, ensure that the monitor is placed on a soft and clean surface. NOTE: The following instructions are applicable only for the stand that is shipped with your monitor. If you are connecting a stand that you purchased from any other source, follow the setup instructions that were included with the stand. -
Page 37: Wall Mounting (Optional)
NOTE: For use only with UL or CSA or GS-listed wall mount bracket with minimum weight or load bearing capacity. - S2422HZ: 15.52 kg (34.20 lb) - S2722DZ: 20.72 kg (45.68 lb) Setting up the monitor... -
Page 38: Operating The Monitor
Operating the monitor Power on the monitor Press the button to turn on the monitor. Using the front-panel controls Use the control buttons at the bottom edge of the monitor to adjust the specifications of the image being displayed. When using the control buttons, an On-Screen Display (OSD) menu appears on the screen with numeric values. - Page 39 Description Use this button to choose to unmute or mute the microphone. NOTE: Mute function on the Dell S2422HZ or S2722DZ works by pressing the Mute button, but Shortcut key: the Mute icon on the UC platform is not sync (Icon Microphone shows unmute).
-
Page 40: Using The Osd Lock Function
Using the OSD lock function You can lock the front-panel control buttons to prevent access to the OSD menu and/ or power button. Using the Lock menu to lock one or more buttons 1. Select one of the following options. The following message appears. - Page 41 Using the front-panel control button to lock one or more buttons 1. Press and hold Button 4 for four seconds, a menu appears on the screen. 2. Select one of the following options: Options Description Select this option to lock OSD menu function. Menu button lock Use this option to lock the power button.
- Page 42 Unlocking the front-panel control buttons Press and hold Button 4 for four seconds until a menu appears on the screen. The following table describes the options to unlock the front-panel control buttons. Options Description Use this option to unlock OSD menu function. Menu button unlock Use this option to unlock power button to turn off the monitor.
-
Page 43: Front-Panel Buttons
Front-panel buttons Use the buttons at the front of the monitor to adjust the image settings. Front-panel button Description Use the Up (increase) and Down (decrease) buttons to adjust items in the OSD menu. Down Use the OK button to confirm your selection. Use the Back button to go back to the previous menu. -
Page 44: Using The On-Screen Display (Osd) Menu
Using the On-Screen Display (OSD) menu Accessing the menu system Icon Menu and Description submenus Brightness/ Use this menu to activate brightness and contrast Contrast adjustment. Brightness Brightness adjusts the luminance of the backlight (minimum 0; maximum 100). Press the button to increase brightness. - Page 45 Icon Menu and Description submenus Input Source Use the Input Source menu to select between different video inputs that are connected to your monitor. USB-C to select the USB-C input source. to select the DP input source. HDMI to select the HDMI input source. Auto select to select Auto select to scan for available input signals.
- Page 46 Icon Menu and Description submenus Color Use the Color menu to adjust the color setting mode. Preset Modes When you select Preset Modes, you can choose Standard, Movie, FPS, RTS, RPG, Warm, Cool, or Custom Color from the list. • S tandard: Default color settings. This mode is the default preset mode.
- Page 47 Icon Menu and Description submenus Input Color Allows you to set the video input mode to: Format • R GB: Select this option if your monitor is connected to a computer (or DVD player) using the USB-C, DP, HDMI cable. • Y CbCr: Select this option if your DVD player supports only YCbCr output.
- Page 48 Icon Menu and Description submenus Sharpness Makes the image look sharper or softer. to adjust the sharpness from ‘0’ to ‘100’. Response Allows you to set the Response Time to Normal or Fast Time or Extreme. Reset Display Resets all settings under the Display menu to the factory defaults.
- Page 49 Icon Menu and Description submenus Menu Select this option to adjust the OSD settings, such as the OSD languages, the amount of time the menu remains on screen, and so on. Language Set the OSD display to one of eight languages. (English, Spanish, French, German, Brazilian Portuguese, Russian, Simplified Chinese, or Japanese).
- Page 50 Icon Menu and Description submenus Lock With the control buttons on the monitor locked, you can prevent people from accessing the controls. It also prevents accidental activation in multiple monitors side-by-side setup. • M enu Buttons: Through OSD to lock the Menu buttons. • P ower Button: Through OSD to lock the Power button.
- Page 51 Icon Menu and Description submenus USB-C Allows you to enable or disable USB-C Charging charging Charging function during monitor power off mode. Other USB Allows you to enable or disable Other USB Charging Charging function during monitor Standby mode. Reset Resets all settings under the Personalize menu to the Persona- factory preset values.
- Page 52 Displays the firmware version of your monitor. Service Tag Displays the Service Tag. The Service Tag is a unique alphanumeric identifier that allows Dell to identify the product specifications and access warranty information. NOTE: The Service Tag is also printed on a label that is at the back of the cover.
-
Page 53: Osd Warning Messages
Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080 (S2422HZ)/2560 x 1440 (S2722DZ). The following message is displayed before the DDC/CI function is disabled. When the monitor enters the Standby mode, the following message is displayed. - Page 54 When the USB-C upstream cable is not connected, the microphone and webcam module is inactive, and the following message is displayed. When you disable webcam only, the following message is displayed. By default, No is selected. You can select “Yes” or “Yes, and do not ask again.” If you reset Audio and Webcam, or if you restore factory setting, the following message is displayed again.
- Page 55 If you want to disable it, select “Audio & Webcam->Status Indicator->Off” in the OSD menu. If you press any button other than the power button, the following messages appear depending on the selected input. A message is displayed while the cable supporting DP alternate mode is connected to the monitor under the following conditions: •...
- Page 56 The following message is displayed if you select OSD items of Factory Reset in Other feature. The following message is displayed when you select ‘Yes‘ to reset to default settings. Select OSD items of On in Standby Mode in Personalize feature, the following message is displayed.
- Page 57 • The power warning message appears again only when you do a Factory Reset from the OSD menu. If USB-C, DP, or HDMI input is selected and the corresponding cable is not connected, the following dialog box is displayed. NOTE: For microphone and webcam to work, you must connect the USB-C to C upstream cable from the computer to the monitor.
-
Page 58: Setting The Maximum Resolution
3. Click Resolution drop-down list and select 1920 x 1080 (S2422HZ)/2560 x 1440 (S2722DZ). 4. Click Apply. If you do not see 1920 x 1080 (S2422HZ)/2560 x 1440 (S2722DZ) as an option, you may have to update your graphics driver. Depending on your computer, complete one of the following procedures: 1. -
Page 59: Setting Up Windows Hello
Setting up Windows Hello In Windows 10: 1. Click Windows start menu, click Settings. 2. Click Accounts. 3. Click Sign-in options. Set a PIN before you enroll in Windows Hello. Operating the monitor... - Page 60 4. Click Add under PIN, enter to Set up a PIN. Enter New PIN and Confirm PIN, and then click Next. After you complete setting the PIN, the options to set up Windows Hello will unlock. 5. Click Set up under Windows Hello, enter to Windows Hello setup. Operating the monitor...
- Page 61 6. Click Get started. 7. Keep looking directly at your screen and position yourself so that your face is in the center of the frame that appears on screen. The webcam registers your face. Operating the monitor...
- Page 62 8. When the following message is displayed, click Close to exit Windows Hello setup. 9. After the Windows Hello setup is complete, you can also improve the recognition. Click Improve recognition, if necessary. Operating the monitor...
-
Page 63: Setting Up The Monitor Webcam As Default Setting
If you want to set up the monitor webcam as default setting, you must disable the computer built-in webcam. Follow these instructions to identify the computer built-in webcam and disable it: 1. Right-click Dell Monitor Webcam, and click Properties to open the Dell Monitor Webcam Properties. Operating the monitor... - Page 64 2. Click the Details tab. From the Property drop-down list, select Hardware Ids. Operating the monitor...
- Page 65 3. The Value section shows the detail hardware ids of this Dell Monitor IR Webcam. The hardware ids of the computer built-in webcam and the monitor webcam are different. The monitor webcam hardware ids are displayed as shown in the following image.
- Page 66 The following message is displayed. 5. Click Yes. The computer webcam is now disabled and the monitor webcam is used as the default setting. 6. Restart the computer. Operating the monitor...
-
Page 67: Setting Up The Monitor Speaker As Default Setting
DELL S2422HZ (S2422HZ) 3. If only the HDMI or DP cable is connected from your monitor to the computer, only one speaker that is named as DELL S2422HZ or DELL S2722DZ is displayed in the Sound dialog box. DELL S2422HZ-0... - Page 68 4. Select DELL S2422HZ or DELL S2722DZ, and then click Set Default. The monitor speaker is used as the default setting. DELL S2422HZ-0 5. Click OK to close the Sound dialog box. DELL S2422HZ S2422HZ Operating the monitor...
- Page 69 DELL S2422HZ or S2722DZ and Echo Cancelling Speakerphone (S2422HZ or S2722DZ) from the monitor will show in the Sound dialog box. The S2422HZ or S2722DZ monitor would show options for two audio paths supported in the monitor.
-
Page 70: Troubleshooting
Troubleshooting WARNING: Before you begin working on the following steps, follow the Safety instructions. Self-test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. -
Page 71: Built-In Diagnostics
This dialog box also appears during normal operation and when the video cable is disconnected or damaged. 4. Turn off your monitor and reconnect the video cable; Then, turn on both your computer and the monitor. If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, as your monitor is functioning properly. -
Page 72: Common Problems
Missing pixels LCD screen has • Cycle power On-Off. spots • Pixel that is permanently off is a natural defect that can occur in LCD technology. • For more information about Dell Monitor Quality and Pixel Policy, see Dell Support site www.dell.com/pixelguidelines. https:// Stuck-on pixels LCD screen has • Cycle power On-Off. bright spots • Pixel that is permanently off is a natural defect that can occur in LCD technology. - Page 73 Common What you Possible solutions symptoms experience Intermittent Monitor • Ensure that the video cable connecting problems malfunctions on the monitor to the computer is connected and off properly and is secure. • Reset the monitor to factory settings. • Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.
-
Page 74: Product Specific Problems
Product specific problems Problem What you Possible solutions experience Screen image is Image is • Check the Aspect Ratio setting in the Display too small centered on menu OSD. screen, but does • Reset the monitor to factory settings. not fill entire viewing area. - Page 75 • If the computer requires more than 65 W power laptop, and so adaptor, it may not charge with the USB-C connection. • Ensure that you use only Dell approved adapter or the adapter that comes with the product. • Ensure that the USB-C cable is not damaged. Intermittent Intermittent • Check if the maximum power consumption of...
- Page 76 • Ensure that you have set the default playback coming from coming from the device as Echo Cancelling Speakerphone the speakers speakers when (S2422HZ or S2722DZ) or DELL S2422HZ or you play audio/ S2722DZ. video on your • Turn Off the monitor, unplug the monitor power computer cord, replug it, and then turn On the monitor.
- Page 77 • Select “Echo Cancelling Speakerphone (S2422HZ or S2722DZ) from Windows sound settings. Ensure that the monitor’s microphone is selected and enabled or unmuted on the setting in VoIP or UC application. MAC MINI issue MAC MINI issue • The USB hub of the DUT cannot be detected...
- Page 78 Problem What you Possible solutions experience Webcam image Webcam image • Turn on the camera again. Adjust the looks grainy or looks grainy or background environment. dark dark • Increase ambient light > 20lux. Camera cannot Camera cannot Adjust to suitable operating distance: 35 cm~70 be focused be focused Webcam image Webcam image Update to latest monitor firmware.
-
Page 79: Universal Serial Bus (Usb) Specific Problems
Universal Serial Bus (USB) specific problems Specific What You Possible Solutions Symptoms Experience USB interface is USB peripherals • Ensure that your display is turned ON. not working are not working • Reconnect the upstream cable to your computer. • Reconnect the USB peripherals (downstream connector). -
Page 80: Appendix
3. Click Contact Us next to the country drop-down list. 4. Select the appropriate service or support link based on your requirement. 5. Choose the method of contacting Dell that is convenient for you. EU product database for energy label and product...