Advertisement
Quick Links
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
Wear safety
instructions
footwear
1. safety
ensure the trolley is in sound condition and good working order. take action for immediate repair or replacement of damaged parts. use
9
genuine parts only. the use of improper parts may be dangerous and will invalidate the warranty.
WaRning! Prepare the vehicle ready for resting and moving on the trolley. ensure the vehicle will not move, tip, fall etc once it has been
‰
seated on the trolley. take any necessary precautions to protect persons, property and equipment when using this trolley.
locate the trolley in a suitable, well lit working area.
9
Keep working area clean and tidy and free from unrelated materials.
9
use trolley on level and solid ground, preferably concrete. Avoid tarmacadam as trolley may sink in.
9
ensure the vehicle engine is switched off .
9
ensure there are no passengers in the vehicle.
9
ensure all non-essential persons keep a safe distance whilst the trolley is in use.
9
only place trolley under those lifting points recommended by vehicle manufacturer (see vehicle hand book).
9
check the lifting point is stable and correctly held in trolley supports.
9
ensure the trolley wheels are free to move and that there are no obstructions.
9
ensure you have a clear view and necessary assistance when transporting vehicle.
9
ensure there are no persons or obstructions beneath the vehicle before moving.
9
When stationary, always lock the brake wheels.
9
do not operate the trolley if damaged.
8
do not allow untrained persons to operate the trolley.
8
do not exceed the rated capacity of the trolley.
8
WaRning! do not use the trolley to hold and move a vehicle which is unstable.
‰
do not allow the vehicle to move on the trolley.
8
do not move vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.
8
do not work under the vehicle unless supported by axle stands which have been correctly positioned.
8
do not ride on the trolley.
8
do not use the trolley without appropriate supports.
8
do not use the trolley for purposes other than which it is intended.
8
When not in use store trolley in a safe, dry, childproof area.
9
2. intRoduction
Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. enables easy movement around workshop.
V-crutch supports adjustable for height and overall width. fitted with four Ø90mm locking nylon castors.
3. sPecification
moel no .................................................................... Vmd001
minimum Height ......................................................... 315mm
maximum Height ........................................................ 495mm
Height increments4X45mm ......................................4X45mm
minimum support Width ............................................. 350mm
maximum support Width .......................................... 1450mm
Width ........................................................................ 1500mm
capacity ....................................................................... 900kg
© Jack sealey limited
instructions for
Vehicle moVing dolly - 2 Post 900kg max
load
Vmd001
model no:
Original Language Version
Vmd001 | issue 1 15/09/16
Advertisement
Related Manuals for Sealey VMD001
Summary of Contents for Sealey VMD001
- Page 1 Vmd001 model no: thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Keep the trolley clean and periodically oil the wheel bearings. Parts support is available for this product. to obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500. environmental Protection recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.