Advertisement
Quick Links
Thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instruction
manual
1. saFeTY
warNING! ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this product.
‰
do NoT open more than one drawer at a time.
8
do NoT step on the drawers.
8
do NoT let children play with the roll cab.
8
ensure all drawers are fully closed and the self locking catches are activated, before moving the toolbox.
9
secure the brakes when rollcab is in the desired position.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
do NoT use in damp work areas.
8
warNING! the warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and
‰
situations that may occur. it must be understood that common sense and caution are factors which cannot be built into this product, but
must be applied by the operator.
2. INTroducTIoN
Heavy gauge steel with double wall construction for extra strength and durability. Ball bearing drawer runners provide superior performance and
carry heavier loads. Each drawer fitted with catch to prevent accidental opening when being transported around the workshop. Added security
provided by side mounted cylinder lock, supplied with two keys. rubber grip side handles for comfort and ease when manoeuvring. rust and
solvent resistant powder coat paint finish. Fitted with anti-shock protection on all four corners to prevent accidental damage. Features two
Ø125mm swivel castors with large toe locks and two fixed wheels. Tough composite top for fitting and securing top box or can be used as a
workstation. Unique design fitted with perforated side panels for hanging tools and accessories.
3. sPecIFIcaTIoN
model no
overall size
Width
depth
Height
drawers (Qty)
medium
large
X - Large
drawer Width
drawer depth
drawer Height (medium)
drawer Height (large)
Drawer Height (X - Large)
© Jack sealey limited
instructions for
rollcabs 4-10 drawer
model no's:
AP2405
AP2406
AP2407
765mm
470mm
960mm
3
3
5
1
2
1
1
1
535mm
535mm
535mm
390mm
390mm
390mm
60mm
60mm
60mm
130mm
130mm
130mm
195mm
195mm
Original Language Version
aP2405, aP2406, aP2407, aP2408, aP2410
AP2408
AP2410
6
10
2
535mm
535mm
390mm
390mm
60mm
60mm
130mm
AP2405, 2406, 2407, 2408, 2410 issue 3 23/01/17
Advertisement
Related Manuals for Sealey AP2405
Summary of Contents for Sealey AP2405
- Page 1 Thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500. environmental Protection recycle unwanted materials instead of disposing of them as waste. all tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.