PM 1210, 1214, 1217
Please read the instruction manual before installing and using
this machine and observe all warning and safety instructions.
Before you begin
Turn on the iron with the "On / Off" button .
The "Finger guard" symbol will fl ash.
Now activate the finger guard by lifting it.
Selecting the iron speed
Select the roller speed.
Symbol
Speed range
Low speed range
fi
Medium speed range
fi fi
High speed range
fi fi fi
US
Ironing
The Start button begins to fl ash as soon as the
minimum temperature is reached.
Now press the flashing "Start" button to start up
the ironer.
Laundry feed
Lay the item parallel to the roller at the be-
ginning of the laundry infeed table.
Smooth the item.
Feed the item into the machine.
Ironing with a coin-operated payment system
Turn on the iron using the "On / Off" button .
The display symbol fl ashes.
Insert the coin or token.
The symbol will go out in the display.
Select the corresponding temperature range
according to the type of laundry.
Select the roller speed.
Select the temperature
Set the corresponding heater plate temperature
according to the type of fabric.
Type of fabric
Symbol
Temperature
212 - 230 °F
Nylon / Polyester /
Other synthetics
(100 - 110 °C)
231 - 302 °F
Silk / Wool
(111 - 150 °C)
Cottons / Linens
304 - 362 °F
(151 - 185 °C)
FlexControl footswitch
While ironing, press the FlexControl footswit-
ch with your foot to switch the iron to steaming
mode and steam the laundry.
Continuing the ironing procedure
Remove your foot from the footswitch again to
continue with the ironing procedure.
After the indicator light goes out, the rotary
iron is ready for ironing and the countdown of
the purchased ironing time begins.
Press the Start button to begin ironing.
At the end of the ironing time, the heater plate
lowers and the roller comes to a standstill. The
symbol fl ashes. More ironing time can be
purchased at any time.
en - US
M.-Nr. 101 09 940 /01