hit counter script
Canon WUX500ST User Commands
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Projector
  5. WUX500ST
  6. User commands

Canon WUX500ST User Commands

Hide thumbs Also See for WUX500ST:
Table of Contents

Advertisement

Quick Links

Download this manual
MULTIMEDIA PROJECTOR
WUX500ST
User Commands
© CANON INC.2017
YT1-1471-000

Advertisement

Table of Contents
loading

Related Manuals for Canon WUX500ST

Summary of Contents for Canon WUX500ST

  • Page 1 MULTIMEDIA PROJECTOR WUX500ST User Commands © CANON INC.2017 YT1-1471-000...

  • Page 2: Table Of Contents

    WUX500ST User Commands Table of Contents Table of Contents ......................ii 1. Overview ......................... 1 2. Communication Specifications ................2 Communication Specifications ........................ 2 Usable Character Codes ......................... 4 Communication System (Serial) ......................5 Communication System (LAN) ........................ 5 Communication system (HDBaseT) ......................5 Command Format ...........................
  • Page 3 WUX500ST User Commands BRI ................................ 38 COLOR_TEMP ............................. 39 COMVER .............................. 40 CONT ..............................41 DGAMMA .............................. 42 DZOOM_POS ............................43 DZOOM_RAT ............................44 ERR ..............................45 FINE_GAMMA_R ..........................46 FINE_GAMMA_G..........................47 FINE_GAMMA_B ..........................48 FLTWRN ............................... 49 FNBND ..............................50 FREEZE ..............................

  • Page 4: Overview

    WUX500ST User Commands 1. Overview These specifications describe the methods of controlling Projector WUX500ST from PC or other controllers over an RS-232C, wired LAN, wireless LAN, or HDBaseT connection. Symbols The following symbols are used in these specifications: Symbol Description Data in [ ] can be omitted.

  • Page 5: Communication Specifications

    WUX500ST User Commands 2. Communication Specifications Communication Specifications The projector can be controlled via RS-232C, wired LAN, HDBaseT, or wireless LAN connection. PC - Projector connection configuration LAN PORT LAN PORT Network connection COM PORT HDBaseTCOM PORT Wireless LAN Projector...
  • Page 6 WUX500ST User Commands * To use the wireless connection, on the projector, the wireless side of "network (wired/wireless)" must be set to Infra or Pi AP.

  • Page 7: Usable Character Codes

    WUX500ST User Commands Usable Character Codes Use ASCII codes in the red and blue areas of the following table. No distinction is made between double-byte characters and single-byte characters. All characters are interpreted as single-byte characters, so do not use double-byte or triple-byte characters.

  • Page 8: Communication System (Serial)

    WUX500ST User Commands Communication System (Serial) Item Specification Communication mode RS-232-C Start-stop synchronization half-duplex communication Transmission speed 19.2 Kbps Character length 8 bits/character Stop bit 2 bits Parity None Command format Variable-length records with terminals as delimiters Maximum transmission length Maximum of 256 characters (bytes) including delimiters.

  • Page 9: Command Format

    WUX500ST User Commands Command Format Format Commands are sent from PC to the projector in the following format: <command text><delimiter> <command text>=(value>(delimiter> <command text> Character strings consisting of 1 or more alphanumeric letters <value> Character strings consisting of 1 or more alphanumeric letters <delimiter>...
  • Page 10 WUX500ST User Commands Example) PC → PJ PC ← PJ Reference command response A response when reference is made properly for a reference command. Format) g:<command string>=<value><delimiter> Example) PC → PJ PC ← PJ Error response A response when an error occurred.

  • Page 11: Other Items

    WUX500ST User Commands Normal response (BUSY) This response is sent when a command cannot be received during processing. Format) i:BUSY<delimiter> Example) PC → PJ PC ← PJ Other Items Command recognition The receiver (projector) retains incoming characters within a specific Tc, and recognizes the data as "received command"...

  • Page 12: Communication Flow

    WUX500ST User Commands 3. Communication Flow Command Transmission (PC side) Commands should be sent from PC in a way that each character is sent within the specified Tc (inter-character timeout). Command Reception (projector side) The projector retains incoming characters within a specific Tc, and recognizes the data as "received command"...

  • Page 13: Command List

    WUX500ST User Commands 4. Command List Power mode restriction Item Command Setting Reference Description RS-232C SL0 SL1 SL3 PM ON ST PM ON 6AXADJ 6-axis color adjustment - Yes - - Yes 6AXR 6-axis color adjustment R hue/saturation/brightness - Yes -...
  • Page 14 WUX500ST User Commands Power mode restriction Item Command Setting Reference Description RS-232C SL0 SL1 SL3 PM ON ST PM ON 41 HUE Hue setting - Yes - - Yes 42 IMAGE Image mode setting - Yes - - Yes 43 IMAGEFLIP...
  • Page 15 WUX500ST User Commands Power/RS-232C: Indicates whether the command coming through RS-232C is executable. ST: Standby mode (includes SL0, SL1 and SL3 altogether, regardless of the network setting). -12-...

  • Page 16: Guide To Command Description

    WUX500ST User Commands 5. Guide to Command Description This section explains how commands are described. The command descriptions have the format shown below. EXAMPLE Summary of the function Format Setting Command A command format when a command is sent to the projector to make a setting for the function.
  • Page 17 WUX500ST User Commands Environment This defines the environments that support the command (power supply state, input signal state). The command is executable when the projector is in the mode indicated by "Yes" in the table of corresponding command description page.

  • Page 18: Command Details

    WUX500ST User Commands 6. Command Details 6AXADJ 6-axis color adjustment Format Setting Command 6AXADJ=<6-axis adjustment parameter: ID> Response i:OK Reference Command GET=6AXADJ Response g:6AXADJ=<6-axix adjustment parameter: ID> Note: See "Error list" for any response other than the above. <6-axis adjustment parameter:ID>...

  • Page 19: 6Axr

    WUX500ST User Commands 6AXR 6-axis adjustment (red), hue/saturation/brightness Format Setting Command 6AXR=<R hue:Number>,<R saturation:Number>, <R brightness:Number> Response i:OK Reference Command GET=6AXR Response g:6AXR=<R hue:Number>,<R saturation:Number>, <R brightness:Number> Note: See "Error list" for any response other than the above. <R hue:Number> is within -20 to 20.

  • Page 20: 6Axg

    WUX500ST User Commands 6AXG 6-axis adjustment (green), hue/saturation/brightness Format Setting Command 6AXG=<G hue:Number>,<G saturation:Number>,<G brightness:Number> Response i:OK Reference Command GET=6AXG Response g:6AXG=<G hue:Number>,<G saturation:Number>,<G brightness:Number> Note: See "Error list" for any response other than the above. <G hue:Number> is within -20 to 20.

  • Page 21: 6Axb

    WUX500ST User Commands 6AXB 6-axis adjustment (blue), hue/saturation/brightness Format Setting Command 6AXB=<B hue:Number>,<B saturation:Number>,<B brightness:Number> Response i:OK Reference Command GET=6AXB Response g:6AXB=<B hue:Number>,<B saturation:Number>,<B brightness:Number> Note: See "Error list" for any response other than the above. <B hue:Number> is within -20 to 20.

  • Page 22: 6Axc

    WUX500ST User Commands 6AXC 6-axis adjustment (cyan), hue/saturation/brightness Format Setting Command 6AXC=<C hue:Number>,<C saturation:Number>,<C brightness:Number> Response i:OK Reference Command GET=6AXC Response g:6AXC=<C hue:Number>,<C saturation:Number>,<C brightness:Number> Note: See "Error list" for any response other than the above. <C hue:Number> is within -20 to 20.

  • Page 23: 6Axm

    WUX500ST User Commands 6AXM 6-axis adjustment (magenta), hue/saturation/brightness Format Setting Command 6AXM=<M hue:Number>,<M saturation:Number>,<M brightness:Number> Response i:OK Reference Command GET=6AXM Response g:6AXM=<M hue:Number>,<M saturation:Number>,<M brightness:Number> Note: See "Error list" for any response other than the above. <M hue:Number> is within -20 to 20.

  • Page 24: 6Axy

    WUX500ST User Commands 6AXY 6-axis adjustment (yellow), hue/saturation/brightness Format Setting Command 6AXY=<Y hue:Number>,<Y saturation:Number>,<Y brightness:Number> Response i:OK Reference Command GET=6AXY Response g:6AXY=<Y hue:Number>,<Y saturation:Number>,<Y brightness:Number> Note: See "Error list" for any response other than the above. <Y hue:Number> is within -20 to 20.

  • Page 25: Ambadj

    WUX500ST User Commands AMBADJ Ambient light correction adjustment ON/OFF Format Setting Command AMBADJ=<Ambient light correction adjustment parameter:ID> Response i:OK Reference Command GET=AMBADJ Response g:AMBADJ=<Ambient light correction adjustment parameter:ID> Note: See "Error list" for any response other than the above. < Ambient light correction adjustment parameter:ID >...

  • Page 26: Amblevel

    WUX500ST User Commands AMBLEVEL Ambient light level settings Format Setting Command AMBLEVEL=<Ambient light level settings parameter:ID> Response i:OK Reference Command GET=AMBLEVEL Response g: AMBLEVEL=<Ambient light level settings parameter:ID> Note: See "Error list" for any response other than the above. < Ambient light level settings parameter:ID >...

  • Page 27: Ambtype

    WUX500ST User Commands AMBTYPE Ambient light type settings Format Setting Command AMBTYPE=<Ambient light type settings parameter:ID> Response i:OK Reference Command GET=AMBTYPE Response g: AMBTYPE=<Ambient light type settings parameter:ID> Note: See "Error list" for any response other than the above. < Ambient light type settings parameter:ID >...

  • Page 28: Asela1

    WUX500ST User Commands ASELA1 Analog PC-1 audio terminal selection Format Setting Command ASELA1=<Analog PC-1 audio terminal selection parameter:ID> Response i:OK Reference Command GET=ASELA1 Response g: ASELA1=<Analog PC-1 audio terminal selection parameter:ID> Note: See "Error list" for any response other than the above.

  • Page 29: Asela2

    WUX500ST User Commands ASELA2 Analog PC-2 audio terminal selection Format Setting Command ASELA2=<Analog PC-2 audio terminal selection parameter:ID> Response i:OK Reference Command GET=ASELA2 Response g:ASELA2=<Analog PC-2 audio terminal selection parameter:ID> Note: See "Error list" for any response other than the above.

  • Page 30: Aselc

    WUX500ST User Commands ASELC Component Audio input terminal selection Format Setting Command ASELC=<Component audio terminal selection parameter:ID> Response i:OK Reference Command GET=ASELC Response g: ASELC=<Component audio terminal selection parameter:ID> Note: See "Error list" for any response other than the above.

  • Page 31: Aseld

    WUX500ST User Commands ASELD Digital PC Audio input terminal selection Format Setting Command ASELD=<Digital PC audio terminal selection parameter:ID> Response i:OK Reference Command GET=ASELD Response g:ASELD=<Digital PC audio terminal selection parameter:ID> Note: See "Error list" for any response other than the above.

  • Page 32: Aselh

    WUX500ST User Commands ASELH HDMI Audio input terminal selection Format Setting Command ASELH=<HDMI audio terminal selection parameter:ID> Response i:OK Reference Command GET=ASELH Response g:ASELH=<HDMI audio terminal selection parameter:ID> Note: See "Error list" for any response other than the above. < HDMI audio terminal selection parameter:ID>...

  • Page 33: Aselhdbt

    WUX500ST User Commands ASELHDBT HDBaseT Audio input terminal selection Format Setting Command ASELHDBT=<HDBaseT audio terminal selection parameter:ID> Response i:OK Reference Command GET=ASELHDBT Response g: ASELHDBT=<HDBaseT audio terminal selection parameter:ID> Note: See "Error list" for any response other than the above.

  • Page 34: Asell

    WUX500ST User Commands ASELL LAN audio input terminal selection Format Setting Command ASELL=<LAN audio terminal selection parameter:ID> Response i:OK Reference Command GET=ASELL Response g:ASELL=<LAN audio terminal selection parameter:ID> Note: See "Error list" for any response other than the above. <LAN audio terminal selection parameter:ID>...

  • Page 35: Aselu

    WUX500ST User Commands ASELU USB audio input terminal selection Format Setting Command ASELU=<USB audio terminal selection parameter:ID> Response i:OK Reference Command GET=ASELU Response g:ASELU=<USB audio terminal selection parameter:ID> Note: See "Error list" for any response other than the above. <USB audio terminal selection parameter:ID>...

  • Page 36: Aspect

    WUX500ST User Commands ASPECT Aspect ratio Format Setting Command ASPECT=<Screen setting parameters:ID> Response i:OK Reference Command GET=ASPECT Response g:ASPECT=<Screen setting parameters:ID> Note: See "Error list" for any response other than the above. < Screen setting parameters:ID > Parameter Meaning AUTO...

  • Page 37: Autopc

    WUX500ST User Commands AUTOPC Auto PC Format Setting Command AUTOPC Response i:OK Reference Command Response Note: See "Error list" for any response other than the above. Environment Power mode restriction Input WiFi RS-232C SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB...

  • Page 38: Autosetexe

    WUX500ST User Commands AUTOSETEXE Auto setup Format Setting Command AUTOSETEXE=<Auto setup parameter:ID> Response i:OK — Reference Command — Response Note: See "Error list" for any response other than the above. < Auto setup parameter:ID > Parameter Meaning INPUT Runs auto input...

  • Page 39: Avol

    WUX500ST User Commands AVOL Audio volume adjustment Format Setting Command AVOL=<Audio volume:Number> Response i:OK Reference Command GET= AVOL Response g:AVOL=<Audio volume:Number> Note: See "Error list" for any response other than the above. Setting values for <Audio volume:Number> are 0 to 20.

  • Page 40: Blank

    WUX500ST User Commands BLANK Screen blank Format Setting Command BLANK=<BLANK parameter:ID> Response i:OK Reference Command GET=BLANK Response g:BLANK=<BLANK parameter:ID> Note: See "Error list" for any response other than the above. < BLANK parameter:ID > Parameter Meaning BLANK ON BLANK OFF...

  • Page 41: Bri

    WUX500ST User Commands Brightness setting Format Setting Command BRI=<Brightness setting:Number> Response i:OK Reference Command GET=BRI Response g:BRI=<Brightness setting:Number> Note: See "Error list" for any response other than the above. Setting values for <Brightness setting:Number> are -20 to 20. Environment Power mode restriction...

  • Page 42: Color_Temp

    WUX500ST User Commands COLOR_TEMP Color temperature setting Format Setting Command COLOR_TEMP=<Color temperature setting:Number> Response i:OK Reference Command GET=COLOR_TEMP Response g:COLOR_TEMP=<Color temperature setting:Number> Note: See "Error list" for any response other than the above. Setting values for <Color temperature setting:Number> are -17 to 21.

  • Page 43: Comver

    WUX500ST User Commands COMVER User command version inquiry Format — Setting Command — Response Reference Command GET=COMVER Response g:COMVER="<User command version:Character string> Note: See "Error list" for any response other than the above. Environment Power mode restriction Input WiFi RS-232C...

  • Page 44: Cont

    WUX500ST User Commands CONT Contrast setting Format Setting Command CONT=<Contrast setting:Number> Response i:OK Reference Command GET=CONT Response g:CONT=<Contrast setting:Number> Note: See "Error list" for any response other than the above. Setting values for <Contrast setting:Number> are -20 to 20. Environment...

  • Page 45: Dgamma

    WUX500ST User Commands DGAMMA Dynamic gamma Format Setting Command DGAMMA=<Dynamic gamma setting parameter:ID> Response i:OK Reference Command GET=DGAMMA Response g:DGAMMA=<Dynamic gamma setting parameter:ID> Note: See "Error list" for any response other than the above. < Dynamic gamma setting parameter:ID >...

  • Page 46: Dzoom_Pos

    WUX500ST User Commands DZOOM_POS Zoom display position Format Setting Command DZOOM_POS=<DZOOM position X:Number>,<DZOOM position Y:Number> Response i:OK Reference Command GET= DZOOM_POS Response g:DZOOM_POS=<DZOOM position X:Number>,<DZOOM position Y:Number> Note: See "Error list" for any response other than the above. <DZOOM position X/Y:Number> is a signed integer indicating the central position of the enlarged input image.

  • Page 47: Dzoom_Rat

    WUX500ST User Commands DZOOM_RAT Zoom display ratio Format Setting Command DZOOM_RAT=<DZOOM ratio parameter:ID> Response i:OK Reference Command GET=DZOOM_RAT Response g: DZOOM_RAT=<DZOOM ratio parameter:ID> Note: See "Error list" for any response other than the above. < DZOOM ratio parameter:ID > Parameter...

  • Page 48: Err

    WUX500ST User Commands Error information inquiry Format — Setting Command — Response Reference Command GET=ERR Response g:ERR=<ErrorID:Character string> Note: See "Error list" for any response other than the above. <ErrorID:Character string> Parameter Meaning NO_ERROR No error ABNORMAL_TEMPERATURE Temperature error FAULTY_LAMP...

  • Page 49: Fine_Gamma_R

    WUX500ST User Commands FINE_GAMMA_R Fine gamma (R) Format Setting Command FINE_GAMMA_R=<Fine gamma (R) adjustment point 1 adjustment value:Number>,<Fine gamma (R) adjustment point 2 adjustment value:Number>,・・・,<Fine gamma (R) adjustment point n adjustment value:Number> Response i:OK Reference Command GET=FINE_GAMMA_R Response g: FINE_GAMMA_R=<Fine gamma (R) adjustment point 1 adjustment value:Number>,<Fine gamma (R) adjustment point 2 adjustment...

  • Page 50: Fine_Gamma_G

    WUX500ST User Commands FINE_GAMMA_G Fine gamma (G) Format Setting Command FINE_GAMMA_G=<Fine gamma (G) adjustment point 1 adjustment value:Number>,<Fine gamma (G) adjustment point 2 adjustment value:Number>,・・・,<Fine gamma (G) adjustment point n adjustment value:Number> Response i:OK Reference Command GET=FINE_GAMMA_G Response g: FINE_GAMMA_G=<Fine gamma (G) adjustment point 1 adjustment value:Number>,<Fine gamma (G) adjustment point 2 adjustment...

  • Page 51: Fine_Gamma_B

    WUX500ST User Commands FINE_GAMMA_B Fine gamma (B) Format Setting Command FINE_GAMMA_B=<Fine gamma (B) adjustment point 1 adjustment value:Number>,<Fine gamma (B) adjustment point 2 adjustment value:Number>,・・・,<Fine gamma (B) adjustment point n adjustment value:Number> Response i:OK Reference Command GET=FINE_GAMMA_B Response g: FINE_GAMMA_B=<Fine gamma (B) adjustment point 1 adjustment value:Number>,<Fine gamma (B) adjustment point 2 adjustment...

  • Page 52: Fltwrn

    WUX500ST User Commands FLTWRN Air filter cleaning warning Format Setting Command FLTWRN=<Filter warning parameter:ID> Response i:OK Reference Command GET= FLTWRN Response g: FLTWRN=<Filter warning parameter:ID> Note: See "Error list" for any response other than the above. FLTWRN=<Filter warning parameter:ID> Parameter...

  • Page 53: Fnbnd

    WUX500ST User Commands FNBND [Fn] button setting Format Setting Command FNBND=<[FN] button setting parameter :ID> Response i:OK Reference Command GET= FNBND Response g: FNBND=<[Fn] button setting parameter :ID> Note: See "Error list" for any response other than the above. <[Fn] button setting parameter :ID>...

  • Page 54: Freeze

    WUX500ST User Commands FREEZE Screen freeze Format Setting Command FREEZE=<FREEZE parameter:ID> Response i:OK Reference Command GET= FREEZE Response g: FREEZE=<FREEZE parameter:ID> Note: See "Error list" for any response other than the above. < FREEZE parameter:ID > Parameter Meaning Environment Power mode restriction...

  • Page 55: Gamma

    WUX500ST User Commands GAMMA Gamma adjustment Format Setting Command GAMMA=<Gamma adjustment:Number> Response i:OK Reference Command GET=GAMMA Response g: GAMMA=<Gamma adjustment:Number> Note: See "Error list" for any response other than the above. Setting values for Gamma adjustment: Number> are -10 to 10.

  • Page 56: Hdmi_In

    WUX500ST User Commands HDMI_IN HDMI input setting Format Setting Command HDMI_IN=<HDMI input setting parameter:ID> Response i:OK Reference Command GET= HDMI_IN Response g: HDMI_IN=<HDMI input setting parameter:ID> Note: See "Error list" for any response other than the above. < HDMI input setting parameter:ID >...

  • Page 57: Htmpinf

    WUX500ST User Commands HTMPINF High temperature caution display Format Setting Command HTMPINF=<High temperature caution display setting parameter:ID> Response i:OK Reference Command GET= HTMPINF Response g:HTMPINF=<High temperature caution display setting parameter:ID> Note: See "Error list" for any response other than the above.

  • Page 58: Hue

    WUX500ST User Commands Hue setting Format Setting Command HUE=<Hue setting value:Number> Response i:OK Reference Command GET= HUE Response g:HUE=<Hue setting value:Number> Note: See "Error list" for any response other than the above. Setting values for Hue setting value:Number> are -20 to 20.

  • Page 59: Image

    WUX500ST User Commands IMAGE Image mode setting Format Setting Command IMAGE=<Image mode setting parameter:ID> Response i:OK Reference Command GET= IMAGE Response g: IMAGE=<Image mode setting parameter:ID> Note: See "Error list" for any response other than the above. <Image mode setting parameter:ID>...

  • Page 60: Imageflip

    WUX500ST User Commands IMAGEFLIP Flip display Format Setting Command IMAGEFLIP=<Image flip setting parameters:ID> Response i:OK Reference Command GET= IMAGEFLIP Response g: IMAGEFLIP=<Image flip setting parameters:ID> Note: See "Error list" for any response other than the above. < Image flip setting parameters:ID >...

  • Page 61: Input

    WUX500ST User Commands INPUT Input signal selection Format Setting Command INPUT=<Input selection parameters:ID> Response i:OK Reference Command GET= INPUT Response g: INPUT=<Input selection parameters:ID> Note: See "Error list" for any response other than the above. < Image flip setting parameters:ID >...

  • Page 62: Krep

    WUX500ST User Commands KREP Key repeat Format Setting Command KREP=<Key repeat parameter:ID> Response i:OK Reference Command GET=KREP Response g:KREP=<Key repeat parameter:ID> Note: See "Error list" for any response other than the above. < Key repeat parameter:ID> Parameter Meaning Turned off...

  • Page 63: Lamp

    WUX500ST User Commands LAMP Lamp mode Format Setting Command LAMP=<Lamp output setting parameters:ID> Response i:OK Reference Command GET=LAMP Response g:LAMP=<Lamp output setting parameters:ID> Note: See "Error list" for any response other than the above. < Lamp output setting parameters:ID >...

  • Page 64: Lampcounter

    WUX500ST User Commands LAMPCOUNTER Lamp counter inquiry Format Setting Command Response Reference Command GET=LAMPCOUNTER Response g:LAMPCOUNTER="<Lamp ON time:Character string> Note: See "Error list" for any response other than the above. < Lamp ON time:Character string > Lamp counter ON time:H "[G_______]"...

  • Page 65: Lmpwrn

    WUX500ST User Commands LMPWRN Lamp replacement warning display Format Setting Command LMPWRN=<Lamp warning parameter:ID> Response i:OK Reference Command GET=LMPWRN Response g: LMPWRN=<Lamp warning parameter:ID> Note: See "Error list" for any response other than the above. < Lamp warning parameter:ID> Parameter...

  • Page 66: Main

    WUX500ST User Commands MAIN Unit control panel emulation Format Setting Command MAIN=<Side control emulation button parameters:ID> Response i:OK Reference Command Response Note: See "Error list" for any response other than the above. < Side control emulation button parameters:ID > Parameter...
  • Page 67 WUX500ST User Commands All parameters except "Power" are invalid during standby mode. Example (Setting) >MAIN=MENU < i:OK Note: '>' indicates a command; '<' indicates a response. -64-...

  • Page 68: Memf

    WUX500ST User Commands MEMF Memory color adjustment (flesh) Format Setting Command MEMF=<Memory color adjustment parameter:ID> Response i:OK Reference Command GET=MEMF Response g:MEMF=<Memory color adjustment parameter:ID> Note: See "Error list" for any response other than the above. < Memory color adjustment parameter:ID >...

  • Page 69: Memg

    WUX500ST User Commands MEMG Memory color adjustment (green) Format Setting Command MEMG=<Memory color adjustment parameter:ID> Response i:OK Reference Command GET=MEMG Response g:MEMG=<Memory color adjustment parameter:ID> Note: See "Error list" for any response other than the above. < Memory color adjustment parameter:ID >...

  • Page 70: Mems

    WUX500ST User Commands MEMS Memory color adjustment (sky) Format Setting Command MEMS=<Memory color adjustment parameter:ID> Response i:OK Reference Command GET=MEMS Response g:MEMS=<Memory color adjustment parameter:ID> Note: See "Error list" for any response other than the above. < Memory color adjustment parameter:ID >...

  • Page 71: Mute

    WUX500ST User Commands MUTE Mute control Format Setting Command MUTE=<Mute control parameter:ID> Response i:OK Reference Command GET=MUTE Response g:MUTE=<Mute control parameter:ID> Note: See "Error list" for any response other than the above. < Mute control parameter:ID> Parameter Meaning Disables the audio/beep sound.
  • Page 72 WUX500ST User Commands Random noise reduction Format Setting Command NR=<Random noise reduction setting parameter:ID> Response i:OK Reference Command GET=NR Response g: NR=<Random noise reduction setting parameter:ID> Note: See "Error list" for any response other than the above. <Random noise reduction setting parameter:ID>...

  • Page 73: Nrmpg

    WUX500ST User Commands NRMPG MPEG noise reduction Format Setting Command NRMPG=<MPEG noise reduction setting parameter:ID> Response i:OK Reference Command GET=NRMPG Response g:NRMPG=<MPEG noise reduction setting parameter:ID> Note: See "Error list" for any response other than the above. < MPEG noise reduction setting parameter:ID >...

  • Page 74: Nrmsqt

    WUX500ST User Commands NRMSQT Mosquito noise reduction Format Setting Command NRMSQT=<Mosquito noise reduction setting parameter:ID> Response i:OK Reference Command GET=NRMSQT Response g:NRMSQT=<Mosquito noise reduction setting parameter:ID> Note: See "Error list" for any response other than the above. <Mosquito noise reduction setting parameter:ID>...

  • Page 75: Ovscan

    WUX500ST User Commands OVSCAN Overscan setting Format Setting Command OVSCAN=<Overscan setting parameter:ID> Response i:OK Reference Command GET= OVSCAN Response g:OVSCAN=<Overscan setting parameter:ID> Note: See "Error list" for any response other than the above. <Overscan setting parameter:ID> Parameter Meaning Turns overscan to OFF...

  • Page 76: Power

    WUX500ST User Commands POWER Power supply control Format Setting Command POWER=<power control parameter:ID> Response i:OK Reference Command GET= POWER Response g: POWER = < Power mode parameter:ID > Note: See "Error list" for any response other than the above. < Power control parameter:ID >...

  • Page 77: Prodcode

    WUX500ST User Commands PRODCODE Product name inquiry Format Setting Command Response Reference Command GET= PRODCODE Response g: PRODCODE="<Product name:Character string> Note: See "Error list" for any response other than the above. < Product name:Character string > Parameter Meaning WUX500ST WUX500ST...
  • Page 78 WUX500ST User Commands Remote control operation emulate Format Setting Command RC=<Remote control emulation button parameters:ID> Response i:OK Reference Command Response Note: See "Error list" for any response other than the above. < Remote control emulation button parameters:ID > Parameter Meaning...
  • Page 79 WUX500ST User Commands DZOOM_M DZOOM - DZOOM_M+REP Button press start VOL_P VOL + VOL_P+REP VOL + Button press start VOL_M VOL - VOL_M+REP VOL - Button press start MUTE MUTE IMAGE IMAGE FREEZE FREEZE BLANK BLANK GAMMA GAMMA SPLIT SPLIT...

  • Page 80: Rgbgain

    WUX500ST User Commands RGBGAIN RGB gain adjustment Format Setting Command RGBGAIN=<R gain setting:Number>,<G gain setting:Number>,<B gain setting:Number> Response i:OK Reference Command GET=RGBGAIN Response g:RGBGAIN=<R gain setting:Number>,<G gain setting:Number>,<B gain setting:Number> Note: See "Error list" for any response other than the above.

  • Page 81: Rgboffset

    WUX500ST User Commands RGBOFFSET RGB offset adjustment Format Setting Command RGBOFFSET=<R offset setting:Number>,<G offset setting:Number>,<B offset setting:Number> Response i:OK Reference Command GET=RGBOFFSET Response g:RGBOFFSET=<R offset setting:Number>,<G offset setting:Number>,<B offset setting:Number> Note: See "Error list" for any response other than the above.

  • Page 82: Romver

    WUX500ST User Commands ROMVER Firmware version inquiry Format Setting Command Response Reference Command GET=ROMVER Response g:ROMVER="<ROM version:Character string> Note: See "Error list" for any response other than the above. Environment Power mode restriction Input WiFi RS-232C SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB...

  • Page 83: Sat

    WUX500ST User Commands Color saturation setting Format Setting Command SAT=<Color saturation setting value:Number> Response i:OK Reference Command GET=SAT Response g:SAT=<Color saturation setting value:Number> Note: See "Error list" for any response other than the above. Setting values for <Color saturation setting value:Number> are -20 to 20.

  • Page 84: Saveimgprof

    WUX500ST User Commands SAVEIMGPROF User memory creation/storage/deletion Format Setting Command SAVEIMGPROF=<User memory save to parameter:ID> Response i:OK Reference Command GET=SAVEIMGPROF Response g:SAVEIMGPROF=<Number of user memories>:<User 1 present parameter>,<User 2 present parameter>,<User 3 present parameter>,<User 4 present parameter>,<User 5 present parameter>' Note: See "Error list"...

  • Page 85: Scrnaspect

    WUX500ST User Commands SCRNASPECT Screen aspect setting Format Setting Command SCRNASPECT=<Screen aspect setting parameter:ID> Response i:OK Reference Command GET=SCRNASPECT Response g:SCRNASPECT=<Screen aspect setting parameter:ID> Note: See "Error list" for any response other than the above. < Screen setting parameter:ID >...

  • Page 86: Sharp

    WUX500ST User Commands SHARP Sharpness setting Format Setting Command SHARP=<Sharpness setting:Number> Response i:OK Reference Command GET=SHARP Response g:SHARP=<Sharpness setting:Number> Note: See "Error list" for any response other than the above. Setting values for <Sharpness setting:Number> are -10 to 10. Environment...

  • Page 87: Sigmsg

    WUX500ST User Commands SIGMSG Input status display Format Setting Command SIGMSG=<Input status display setting parameter:ID> Response i:OK Reference Command GET=SIGMSG Response g:SIGMSG=<Input status display setting parameter:ID> Note: See "Error list" for any response other than the above. <Input status display setting parameter:ID>...

  • Page 88: Signal_Info

    WUX500ST User Commands SIGNAL_INFO Displayed signal information inquiry Format Setting Command Response Reference Command GET=SIGNAL_INFO Response g:SIGNAL_INFO="<Input signal information:Character string> Note: See "Error list" for any response other than the above. Environment Power mode restriction Input WiFi RS-232C SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB...

  • Page 89: Signalstatus

    WUX500ST User Commands SIGNALSTATUS Signal detection inquiry Format Setting Command Response Reference Command GET=SIGNALSTATUS Response g:SIGNALSTATUS=<Signal status:ID> Note: See "Error list" for any response other than the above. < Signal status parameter:ID > Parameter Meaning NO_SIGNAL Signal not detected DISPLAYING...

  • Page 90: Temp

    WUX500ST User Commands TEMP Temperature sensor value inquiry Format Setting Command Response Reference Command GET=TEMP g:TEMP=<Number of sensors>,<Sensor 1 value>,…,<Sensor n Response value> Note: See "Error list" for any response other than the above. Environment Power mode restriction Input WiFi...

  • Page 91: Tptn

    WUX500ST User Commands TPTN Test pattern Format Setting Command TPTN=<Test pattern parameter:ID> Response i:OK Reference Command GET=TPTN Response g:TPTN=<Test pattern parameter:ID> Note: See "Error list" for any response other than the above. < Test pattern parameter:ID> Parameter Meaning Turned off...
  • Page 92 WUX500ST User Commands (Reference) > GET=TPTN < g:TPTN=OFF Note: '>' indicates a command; '<' indicates a response. -89-...

  • Page 93: Zsclr

    WUX500ST User Commands ZSCLR Zoom Format Setting Command ZSCLR=<Zoom setting value: Numerical value> Response i:OK Reference Command GET=ZSCLR Response g:ZSCLR=<Zoom setting value: Numerical value> Note: See "Error list" for any response other than the above. Environment Power mode restriction Input...

  • Page 94: Error List

    WUX500ST User Commands 7. Error List Response Description Reaction i:OK The command was successfully processed. e:0002 INVALID_COMMAND The command was invalid (not Use a correct command or correct command defined), or the command format was format. incorrect. e:000A INVALID_PARAMETER Argument (parameter) of the command Use a correct argument (parameter).

  • Page 95: Error Processing

    WUX500ST User Commands 8. Error Processing -92-...

Table of Contents