hit counter script
Canon WUX500ST Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Projector
  5. WUX500ST
  6. Manual

Canon WUX500ST Manual

Hide thumbs Also See for WUX500ST:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual

1. Main Features

1-1. Single-lamp compact install model with WUXGA resolution
and high 5000 lm brightness
Featuring a new LCOS panel and enhanced optical technology, while inheriting basic
features of the WUX450ST, the WUX500ST has finally achieved high brightness of 5,000
lumens. This projector is designed to meet the market demand of brighter picture.
1-2. Ultra wide-angle lens and the maximum lens shift range of 75%
WUX500ST allows for displaying 100 inch images from a very short distance of 1.20 meters.
Furthermore, the projector can accommodate to a wide range of installment environment
because of its large maximum lens shift range of 75%.
1-3. HDBaseT input
The WUX500ST features HDBaseT reception, which is capable of a long-distance
transmission of video, audio, and control signals over single LAN cable. Cabling of up to
100 meters
*1:
Always use STP cable that is above CAT5e specified by the TIA (Telecommunications Industry Association) of
the United States. The length of 100 meters contains the length of patch cable and connectors. However,
proper projection performance may not be achieved even within the specified distance, depending on the type
of cable used and installation conditions. Also refer to the HDBaseT specifications.
1-4. Wi-Fi function
In addition to wired LAN connection, the WUX500ST features Wi-Fi function to support
wireless LAN connection. This new feature enables wireless input of video and audio signals
from a computer. (Wireless/wired data transfer is enabled by downloading dedicated
application software from the projector and installing it into the source computer).
1-5. Originally developed image engine helps to achieve not only
better picture quality but also excellent installation performance
In addition to advanced image processing, the image engine also capable of performing the
following functions:
l
4-point Keystone Correction
l
Edge Blending
l
Picture by Picture
l
Motion Blur Reduction
WUX500ST (1/18)
LCOS Projector WUX500ST
(*1)
is enabled to enhance flexibility and convenience in system configuration.

Advertisement

Table of Contents
loading

Related Manuals for Canon WUX500ST

Summary of Contents for Canon WUX500ST

  • Page 1: Main Features

    This projector is designed to meet the market demand of brighter picture. 1-2. Ultra wide-angle lens and the maximum lens shift range of 75% WUX500ST allows for displaying 100 inch images from a very short distance of 1.20 meters. Furthermore, the projector can accommodate to a wide range of installment environment because of its large maximum lens shift range of 75%.

  • Page 2: Basic Specifications

    Digital video input 1080p/1080i/720p/576p/480p Component video input 1080p/1080i/720p/576p/576i/480p/480i HDBaseT input Equivalent to the input signals for HDMI terminal Network NMPJ screen transfer (CANON original protocol) USB data transfer JPEG still image Terminals RJ-45 (HDBaseT) HDBaseT input (video, audio, control, and network) DVI-I...

  • Page 3: Image Size And Projection Distance

    2-2. Image size and projection distance The WUX500ST is suited for projecting pictures in size between 30 and 300 inches. Projection distance to the corresponding picture size is as follows. Note that focus operations on this product is performed manually. The product‘s lens shift ratio is variable.
  • Page 4 Lens shift function and image position This product has a lens shift function (manual) that can move the image position vertically and horizontally. ■Lens shift specifications Model WUX500ST (WUXGA, 0.71 diagonal) (Vertical) 0%～75% Amount of lens shift (Horizontal) -10%～10% (Vertical) 5:5～12.5:-2.5 Lens shift ratio (Horizontal) 4:6～6:4...

  • Page 5: Adjustable Feet

    2-4. Adjustable feet The WUX500ST has two adjustable feet on the projection lens side of the bottom. Adjust the lengths to lift up the lens side of the projector so that the projection angle can be adjusted. Adjustable feet The length is adjusted by rotation the feet.

  • Page 6: Video Signals

    United States. The length of 100 meters contains the length of patch cable and connectors. However, proper projection performance may not be achieved even within the specified distance, depending on the type of cable used and installation conditions. WUX500ST (6/18)

  • Page 7: Component Video Input

    The projector will receive still images from a computer (when NMPJ in operation) via network. Still images are output to the projector by converting the image to the number of pixels of the LCOS device used for the projector via NMPJ operation. WUX500ST (7/18)
  • Page 8 Dot clock of video signal outputted from a computer can be altered by changing the resolution of video card or frame rate. WUX500ST (8/18)
  • Page 9 3-2 .HDBaseT specifications HDBaseT is used to transfer video signal and network data. Below image shows the connections for HDBaseT; note that the WUX500ST is equipped with a receiver so no extra receiver is needed. ●For video signals (HDMI cable is used for connection ①) ①...
  • Page 10 Owing to the structure of a network cable, HDBaseT signals are transferred over parallel channels that are physically divided into four. Each channel has an index value (dB) to indicate signal stability; with the WUX500ST, a total value is calculated by detecting the four channel values. Based on this value, the...
  • Page 11 *3: Dedicated application software downloadable from the WUX500ST. *4: Power ON command cannot be performed in wireless connection. Automatic scanning The WUX500ST automatically scans for an access point and makes connection when the projector is set in the following conditions: w Wireless network setting is turned ON...
  • Page 12 *2: Computer cable is not equipped in some models. *3: Only use the attachment dedicated for the WUX500ST as the size and the weight will vary among products. Consult a professional installer before attempting to mount the projector to a ceiling.

  • Page 13: Product Appearance

    W: 337 mm, H1: 132 mm, D1: 362 mm protrusions W: 13.3 in, H1: 5.2 in, D1: 14.3 in Lens center From the left side: 77.0 mm (front is the surface with lens). From the installed surface: 61.75 mm Mass 6.3 kg (13.9 lb) WUX500ST (13/18)
  • Page 14 Mini jack Wired remote control connection ●Wired remote control connection The WUX500ST can be operated from optional remote control RS-RC05 via wired connection. When a cable is connected to a mini jack terminal for wire remote control, the projector will automatically disable its infrared wireless remote control mode. In this mode, the projector can only be operated from the wired remote control.
  • Page 15 ① ② は調整脚を外して使用する。 Remove the adjustment feet to use ① and ②. ③ and ④ can be used for attaching optional feet. ●Part names ① Projection lens ⑨ ④ WUX500ST (15/18) ①...
  • Page 16 6. Cautions for Installation and Operation 6-1 Cautions for installation The WUX500ST adopts a large, wide-angle lens and manual lens shift mechanism. For this reason, the following phenomenon will generate in time to time however it is not a malfunction.

  • Page 17: Cautions For Operation

    ● Replace with new lamp when the light turns off or reaches its replacement period: The projector uses high-pressure mercury lamp for its light source, which may deteriorate or WUX500ST (17/18)
  • Page 18 ● Video and audio using NMPJ: The following phenomenon may generate depending on the characteristics of a computer or network in use. This is not a projector malfunction: Image is not reproduced smooth and natural Irregular gap will generated in the video and audio WUX500ST (18/18)

Table of Contents