Page 1: Operation Guide
OPERATION GUIDE Search based on Search based on what you want to do what you want to do MAKE A COPY PRINT A DOCUMENT SCAN AN IMAGE / SAVE A JOB AND SEND AN INTERNET FAX REUSE IT LATER BEFORE USING THE MACHINE COPIER PRINTER SEND A FAX...
Page 2: Make A Copy
MAKE A COPY Conserve Reduce copy Make a copy of this Make a copy on mistakes type of original this type of paper Add the date or Assemble output page numbers into a pamphlet Other convenient functions...
Page 3 Conserve Copy on both sides of the paper Copy on the front and back of a card Copy multiple pages on one side of one sheet of paper...
Page 4 Reduce copy mistakes Print one set of copies for proofing Check the number of scanned pages before making copies...
Page 5 Make a copy of this type of original More original pages than can be loaded at once Bulky original (shadows appear at edges) Book or pamphlet (make facing page copies) Mixed-size originals Bound original such as a book (one page at a time)
Page 6 Make a copy on this type of paper Transparency film Tab Paper...
Page 7 Add the date or page numbers Add the date Add the page number Add a stamp Add text...
Page 8 Assemble output into a pamphlet Create a stapled pamphlet Create a blank margin for punching Fold output in half Staple output Punch holes in output...
Page 9: Other Convenient Functions
Other convenient functions Functions used for specific purposes  Make a copy of arranged photos  Create a large poster  Make a mirror-image copy  Copy onto the centre of the paper  Make a negative copy Convenient functions ...
Page 10: Print A Document
PRINT A DOCUMENT Conserve Print without a Print attractive Assemble output computer output into a pamphlet Print on this type Add text or an of paper image Other convenient functions...
Page 11 Conserve Print on both sides of the paper Print multiple pages on one side of the paper...
Page 12 Print without a computer F T P Print a file on an FTP Print a file in a network folder Print a file in a USB memory device Print a file stored in the machine...
Page 13 Print attractive output Print matching the size of the paper Bring out faint text and lines Adjust the brightness and contrast Adjust the line widths when printing...
Page 14 Assemble output into a pamphlet Create a stapled pamphlet Create a blank margin for punching Print specific pages on the front side of the paper Staple output Punch holes in output...
Page 15 Print on this type of paper Transparency film Rotate the image 180 degrees Tab Paper Print specific pages on different paper...
Page 16 Add text or an image Add a watermark to print data Overlay a fixed form on the print data Overlay an image on the print data...
Page 17 Other convenient functions Correct the size or orientation of the print data  Enlarge or reduce the print image  Print a mirror-image Security is important  Print confidentially  Print an encrypted PDF file Functions used for specific purposes ...
Page 18 SEND A FAX Conserve Send this type of Prevent transmission to Send a clear document the wrong destination document Save trouble Security is important Other convenient functions...
Page 19 Conserve Send when the rate is lowest Send two original pages as a single page Check received data before printing Relay a transmission through a branch office...
Page 20 Send this type of document Bulky original (shadows appear at edges) More original pages than can be loaded at once Original printed on both sides Bound original such as a book (one page at a time) Mixed-size originals ID card or other card...
Page 21 Prevent transmission to the wrong destination Check the destination once more before sending Check the log of previous transmissions Check the result of transmission Stamp scanned original pages...
Page 22 Send a clear document Adjust the exposure Specify the size before sending Adjust the image quality Send without shadows at the edges...
Page 23 Store frequently used settings X X X X - 6 7 8 9 X X X X - 9 8 7 4 View the transmission log X X X X - 4 5 6 7 X X X X - 5 4 3 2 X X X X - 9 9 9 9 Bound original such as a book (one page at a time)
Page 24 Security is important Check the destination once more before sending Print protected reception data Send a document at the other machine's request Send confidentially Initiate reception of a document from a sending machine...
Page 25 Other convenient functions Convenient management functions  Forward a received fax to a network address  Print a list of addresses Convenient functions  Send a thin original  Select a transmission destination from a global address book  Give priority to a transmission ...
Page 26 SCAN AN IMAGE / SEND AN INTERNET FAX Send a clear Send this type of Prevent transmission to Send a smaller image document the wrong destination file Save trouble Scan from my computer Other convenient functions...
Page 27 Send a clear image Adjust the contrast or image quality Send without shadows at the edges Adjust the resolution before sending Suppress the background of a transmitted document...
Page 28 Send this type of document Bulky original (shadows appear at edges) More original pages than can be loaded at once Original printed on both sides Bound original such as a book (one page at a time) Mixed-size originals Original with background...
Page 29 Prevent transmission to the wrong destination Check the result of transmission Stamp scanned original pages Check the log of previous transmissions...
Page 30 Send a smaller file Send at low resolution Reduce an image before sending Send two original pages as a single page Compress a file before sending Send an image in black & white ID or other card...
Page 31 Store frequently used settings a a a @ a a . a a . c o b b b @ b b . b b . c View the transmission log c c c @ c c . c c . c o d d d @ d d .
Page 32 Other convenient functions Convenient management functions  Forward a received fax to a network address  Print a list of transmission destinations Convenient functions  Scan a thin original  Select a transmission destination from a global address book  Send at a specified time ...
Page 33 SAVE A JOB AND REUSE IT LATER Search for a file Organize my files Save an important Print a batch of document files...
Page 34 ab c Search for a file using a keyword Search for a file Search by checking the contents of files...
Page 35 Organize my files Delete a file Periodically delete files Delete all files Change the folder...
Page 36 MAINTAIN THE MACHINE Clean the Replace a toner Replace the Replace the machine cartridge staple cartridge stamp cartridge Replace the toner Dispose of punch collection container waste...
Page 37: Clean The Machine
Clean the machine Clean the document glass and automatic document feeder Clean the bypass feed roller Clean the original feed roller...
Page 38 ABOUT OPERATION GUIDE There are two ways to search for a topic in this guide: you can use an "I want to..." menu, or you can use a regular table of contents. The following explanation assumes that Adobe Reader 8.0 is being used (Some buttons do not appear in the default state.).
Page 39: How To Use This Manual
HOW TO USE THIS MANUAL Click a button below to move to the page that you wish to view. Return to top page button If an operation does not proceed as expected, click this button to start over again. Back one page button Displays the previous page.
Page 40: Manuals Provided With The Machine
MANUALS PROVIDED WITH THE MACHINE Operation manuals in PDF format (this manual) The manuals in PDF format provide detailed explanations of the procedures for using the machine in each mode. To view the PDF manuals, download them from the hard drive in the machine. The procedure for downloading the manuals is explained in "Downloading the Operation Guide"...
Page 41 • Aside from instances provided for by law, SHARP is not responsible for failures occurring during the use of the product or its options, or failures due to incorrect operation of the product and its options, or other failures, or for any damage that occurs due to use of the product.
Page 42: Table Of Contents
INSERTER ......1-63 SHARP OSA ......1-66 •...
Page 43 MAINTENANCE REGULAR MAINTENANCE ....1-69 • CLEANING THE DOCUMENT GLASS AND AUTOMATIC DOCUMENT FEEDER . . . 1-69 • CLEANING THE BYPASS FEED ROLLER . . . 1-71 REPLACING THE TONER CARTRIDGES.
Page 44: Part Names And Functions
BEFORE USING THE MACHINE This section provides basic information about the machine. Please read this chapter before using the machine. PART NAMES AND FUNCTIONS EXTERIOR Saddle stitch finisher (MX-FN16) Output device that enables the use of the staple function and offset function. ☞...
Page 45 USB connector (A type) Supports USB 2.0 (Hi-Speed). This is used to connect a USB device such as USB memory to the machine. For the USB cable, use a shielded cable. (10) Keyboard This is a keyboard that is incorporated into the machine. When not used, it can be stored under the operation panel.
Page 46: Interior
INTERIOR (16) (17) (25) (24) (16) Duplex unit Open this cover to remove a misfeed from the fusing unit area. (17) Fusing unit Toner images are fused here. Caution The fusing unit is hot. Take care in removing misfed paper. (18) Cover of the duplex unit Open when a misfeed has occurred in duplex unit.
Page 47: Automatic Document Feeder And Document Glass
AUTOMATIC DOCUMENT FEEDER AND DOCUMENT GLASS Document feeding area cover Open this cover to remove an original misfeed or clean the paper feed roller. Original guides These help ensure that the original is scanned correctly. Adjust the guides to the width of the original. ☞...
Page 48: Side And Back
SIDE AND BACK USB connector (A type) Supports USB 2.0 (Hi-Speed). This is used to connect a USB device such as USB memory to the machine. This connector is not initially available for use. If you wish to use the connector, contact your service assistance. This connector is not initially available for use.
Page 49: Operation Panel
OPERATION PANEL Touch panel Messages and keys appear in the touch panel display. Touch the displayed keys to perform a variety of operations. When a key is touched, a beep sounds and the selected item is highlighted. This provides confirmation as you perform an operation.
Page 50 [START] key Press this key to copy or scan an original. This key is also used to send a fax in fax mode. (10) [LOGOUT] key ( Press this key to log out after you have logged in and used the machine. When using the fax function, this key can also be pressed to send tone signals on a pulse dial line.
Page 51: Touch Panel
TOUCH PANEL This section explains how to use the touch panel. • To enter text, see "ENTERING TEXT" (page 1-77). • For information on the screens and procedures for using the system settings, see (page 7-4) in "7. SYSTEM SETTINGS". Using the touch panel Example 1 DOCUMENT...
Page 52 Example 4 Exposure Auto Copy Ratio Original Paper Select 100% Auto Auto Plain When at least one special mode is selected, the key appears in the base screen. Example 5 Copy Ratio 200% Zoom 400% 300% 100% 350% 150% Auto Image XY Zoom Touch a numeric value display key to directly enter a value with the numeric keys.
Page 53: Status Display
STATUS DISPLAY When the base screen of a mode appears, the right side of the touch panel shows the machine's status. The information shown is explained below. Copies in progress from tray 1. Ready to scan for next copy job. Exposure Auto Copy Ratio...
Page 54: System Bar
SYSTEM BAR The system bar appears at the bottom of the touch panel. The items that appear in the system bar are explained below. Exposure Auto Copy Ratio 100% Tray1 Job status display The job in progress or reserved are indicated by icons. The icons are as follows.
Page 55 This appears when the data security kit is being used. This appears while the remote operation function is used. The icon appears when the machine is communicating with an external application. Brightness adjustment key Touch this key to adjust the brightness of the touch panel.
Page 56: Turning The Power On And Off
TURNING THE POWER ON AND OFF The machine has two power switches. The main power switch is at the top right after the front cover is opened. The other power switch is the [POWER] key ( Main power switch When the main power switch is switched on, the main power indicator on the operation panel lights up.
Page 57: Energy Save Functions
ENERGY SAVE FUNCTIONS This product has the following two energy save functions that conform to the Energy Star guidelines to help conserve natural resources and reduce environmental pollution. Preheat Mode (Low power mode) Preheat mode automatically lowers the temperature of the fusing unit and thereby reduces power consumption if the machine remains in the standby state for the interval of time set in "Preheat Mode Setting"...
Page 58: User Authentication
USER AUTHENTICATION User authentication restricts the use of the machine to users that have been registered. The functions that each user is allowed to use can be specified, allowing the machine to be customized to meet the needs of your workplace. When the administrator of the machine has enabled user authentication, each user must log in to use the machine.
Page 59 User Authentication When the user number is an 8-digit number, this step is not necessary. (Login takes place automatically after the user number is entered.) LOGOUT • However, note that the [LOGOUT] key ( mode, as the key is used for fax number entry. •...
Page 60: Authentication By Login Name / Password
AUTHENTICATION BY LOGIN NAME / PASSWORD The following procedure is used to log in using a login name and password received from the administrator of the machine or the administrator of the LDAP server. When controlled by login name and password (Different items will appear in the screen when LDAP authentication is used.) User Authentication Login Name...
Page 61 User Authentication Login Name User Name User 0001 Password Auth to: Login Locally • When an LDAP server has been stored, [Auth to:] can be changed. • If you are logging in using a user selection key... The LDAP server was stored when your user information was stored, and thus the LDAP server will appear as the authentication server when you select your login name.
Page 62 User Authentication Login Name User Name User 0001 Password Auth to: Login Locally (Different items will appear in the screen when LDAP authentication is used.) LOGOUT • However, note that the [LOGOUT] key ( mode, as the key is used for fax number entry. •...
Page 63: Home Screen
Application Keys It is possible to display a combined total of eight Sharp OSA application shortcuts and my menu shortcuts. Shortcuts to functions can be registered as keys in the my menu screen. When a shortcut key is touched, the screen for that function appears.
Page 64: Remote Operation Of The Machine
REMOTE OPERATION OF THE MACHINE The remote operation function allows you to operate the machine from your computer. When this function is added, the same screen as the operation panel screen appears on your computer. This allows you to operate the machine from your computer in the same way as if you were standing in front of the machine. Your computer Operate the Operate the...
Page 65: Items Recorded In The Job Log
ITEMS RECORDED IN THE JOB LOG The machine records the jobs that are performed in the job log. The main information that is recorded in the job log is described below. • To make it easy to total the usage counts of differently configured machines, the items recorded in the job log are fixed, regardless of what peripheral devices are installed or the objective of the recording.
Page 66 Item name Print Job Related Item Output Staple Staple Count Punch Count Fold Fold Count Printer Tone Image Send Related Direct Address Item Sender Name Sender Address Transmission Type Administrative Serial Number Broadcast number Entry Order File Type Compression Mode/Compression Ratio Communication Time Fax No.
Page 67 Detailed Items Original Size Original Type Paper Size Paper Type Paper Property: Disable Duplex Paper Property: Fixed Paper Side Paper Property: Disable Staple Paper Property: Disable Punch Duplex Setup Resolution Machine Item Model Name Unit Serial Number Name Machine Location *In some environments this is not recorded.
Page 68: Loading Paper
LOADING PAPER IMPORTANT POINTS ABOUT PAPER This section provides information that you should know before loading paper in the paper trays. Be sure to read this section before loading paper. NAMES AND LOCATIONS OF TRAYS The names of the trays are as follows. Tray 1 Tray 2 Tray 3...
Page 69: Useable Paper
Plain paper that can be used • SHARP standard plain paper (80 g/m • Pain paper other than SHARP standard paper (60 g/m Recycled paper, coloured paper and pre-punched paper must meet the same specifications as plain paper. Contact your dealer or nearest authorised service representative for advice on using these types of paper.
Page 70: Print Side Face Up Or Face Down
• The image quality and toner fusibility of paper may change due to ambient conditions, operating conditions, and paper characteristics, resulting in image quality inferior to that of SHARP standard paper. Contact your dealer or nearest authorised service representative for advice on using these types of paper.
Page 71: Tray Settings For Tray 1 To 4
A4 or 8-1/2" x 11" size paper can be loaded in tray 1 and tray 2. These are parallel large-capacity trays that allow a total of approximately 2000 sheets of SHARP standard paper (80 g/m paper size of tray 1 or tray 2, see "CHANGING THE PAPER SIZE IN PAPER TRAY 1 - TRAY...
Page 72: Changing The Paper Size In Paper Tray 1 - Tray 2
Loading paper in paper tray 1/tray 2 is now complete. CHANGING THE PAPER SIZE IN PAPER TRAY 1 - TRAY 2 To change the paper size of tray 1 - tray 2, follow the steps below. This section only explains how to change the paper size. For the procedures for opening/closing the tray and loading paper, see "LOADING PAPER IN PAPER TRAY 1 - TRAY Tray 1...
Page 73: Loading Paper In Paper Tray 3
Gently pull the tray out until it stops. Load paper into the tray. The paper stack must not be higher than the indicator line (no more than 500 sheets of SHARP standard paper (80g/m (20lbs.)). To change the paper size, see...
Page 74: Changing The Paper Size In Paper Tray 3
Set the paper type. If the paper size was changed from an AB size to an inch size, or from an inch size to an AB size, or if the paper type was changed, be sure to change the appropriate settings as explained in Settings.
Page 75 Changing the paper size in paper tray 3 is now complete. Loading tabbed paper When using tabbed paper, follow the steps below to attach the special guide to the divider plate at the bottom edge of the tabbed paper. (Tabbed paper cannot be used in tray 4.) BEFORE USING THE MACHINE Take out the tabbed paper guide.
Page 76: Changing The Paper Size In Paper Tray 4
Gently push the tray in and set the paper type to tabbed paper. ☞ 7. SYSTEM SETTINGS "Paper Tray Loading transparency film Be sure to load transparency film oriented vertically. (Transparency film cannot be used in tray 4.) CHANGING THE PAPER SIZE IN PAPER TRAY 4 Plain paper from A3 to B5 (11"...
Page 77: Tray Settings Of Tray 5 (A4 Large Capacity Tray)
The large capacity tray can hold up to 3500 sheets of A4 or B5, 8-1/2" x 11" size paper (80 g/m The paper size of tray 5 can only be changed by a SHARP service technician. If you need to change the paper size, consult your dealer or nearest Authorised Service Representative.
Page 78 If you loaded a different type of paper than was loaded previously, be sure to change the paper type setting in "Paper Tray Settings" in the system settings. Do not place heavy objects on the tray or press down on the tray. System Settings: Paper Tray Settings Change these settings if you have loaded a different type of paper in the tray.
Page 79: Tray Settings Of Tray 5 (A3 Large Capacity Tray)
TRAY SETTINGS OF TRAY 5 (A3 LARGE CAPACITY TRAY) LOADING PAPER Up to 3000 sheets of B5 to A3 (8-1/2" x 11" to 11" x 17") size paper (80 g/m capacity tray (MX-LCX3N). For detailed information on the paper that can be loaded, see the specifications in the Safety Guide and Settings"...
Page 80: Paper Table
Caution When placing paper, do not insert your fingers into the openings in the paper table. Do not insert spare paper or other objects into openings inside the tray. If you loaded a different type of paper than was loaded previously, change the paper type setting as explained in "Paper Tray Settings"...
Page 81: Changing The Paper Size
CHANGING THE PAPER SIZE To change the paper size of the large capacity tray (MX-LCX3N), follow the procedure below. This procedure only explains how to change the paper size. For the procedures for opening/closing the tray and loading paper, see "LOADING PAPER"...
Page 82 B4, A4, A4R, B5 16 lbs. Bond to 110 lbs. Index (60 g/m 3000 sheets (21 lbs. Bond (80 g/m SHARP-recommended plain paper, recycled paper, coloured paper, heavy paper Supplied from the machine 27-11/64" (W) x 22-49/64" (D) x 20-35/64" (H) (690 mm (W) x 578 mm (D) x 522 mm (H)) Approx.
Page 83: Loading Paper In The Bypass Tray
LOADING PAPER IN THE BYPASS TRAY The bypass tray can be used to print on plain paper, label sheets, tab paper, and other special media. Up to 100 sheets of paper can be loaded (up to 40 sheets of heavy paper) for continuous printing similar to the other trays. Do not place heavy objects on the bypass tray or press down on the tray.
Page 84: Important Points When Using The Bypass Tray
IMPORTANT POINTS WHEN USING THE BYPASS TRAY • When using plain paper other than SHARP standard paper or special media other than SHARP-recommended transparency film, or when printing on the reverse side of previously used paper, the paper must be loaded one sheet at a time.
Page 85: Originals
"IMAGE SETTINGS" (page 4-47) ☞ 5. SCANNER / INTERNET FAX Allowed original weights MX-M623U/MX-M753U/MX-M623N/ MX-M753N To scan originals from 35 g/m to 49 g/m without using "Slow Scan Mode" may result in original misfeeds. When "Slow Scan Mode" is selected, automatic 2-sided scanning is not possible.
Page 86 Indicator line • Originals of different sizes can be placed together in the automatic document feeder. In this case, select "Mixed Size Original" in the special modes of the mode you are using. • Before inserting originals into the document feeder tray, be sure to remove any staples or paper clips. •...
Page 87: Placing The Original On The Document Glass
PLACING THE ORIGINAL ON THE DOCUMENT GLASS This section explains how to place the original on the document glass. Allowed original sizes Maximum original size Standard sizes A3: 297 mm (height) x 420 mm (width) 11" (height) x 17" (width) Non-standard sizes 297 mm (height) x 432 mm (width) 11-5/8"...
Page 88: Placing A Thick Book
Placing a thick book When scanning a thick book or other thick original, follow the steps below to press the book down. Caution • Close the automatic document feeder slowly. Abruptly closing the automatic document feeder may damage it. • Take care that your fingers are not pinched when closing the automatic document feeder. The automatic document feeder cannot be closed correctly in this state.
Page 89: Peripheral Devices
PERIPHERAL DEVICES This section describes the peripheral devices that can be used with the machine and explains how to use the finisher and saddle stitch finisher, as well as Sharp OSA (application communication module and external account module). PERIPHERAL DEVICES Peripheral devices can be installed on the machine to increase its range of functionality.
Page 90 Product name Expansion memory board Internet fax expansion kit Facsimile expansion kit Application integration module Application communication module External account module Enhanced compression kit Keyboard Sharpdesk 1 licence kit Sharpdesk 5 licence kit Sharpdesk 10 licence kit Sharpdesk 50 licence kit Sharpdesk 100 licence kit Keyboard Stamp unit...
Page 91: Finisher And Saddle Stitch Finisher
FINISHER AND SADDLE STITCH FINISHER The finisher and the saddle stitch finisher include the offset function, which offsets each set of copies from the preceding set for easy separation. Each set of sorted copies can also be stapled. The saddle stitch finisher can automatically staple a set of copies at the centre line and fold the pages to create a pamphlet.
Page 92: Specifications
SPECIFICATIONS Name Finisher (MX-FN15) Number of trays Paper output Face down output Paper capacity Upper paper tray/Middle paper tray: Non-stapling: 2000 sheets of paper or total aggregate thickness is within 250mm (9-53/64"): A4, B5, A5R, 8-1/2" x 11", 5-1/2" x 8-1/2"R or 16K (80 g/m 1000 sheets of paper or total aggregate thickness is within 140mm (5-1/2"):...
Page 93: Staple Cartridge Replacement And Staple Jam Removal
Dimensions When tray is folded up: 700 mm (W) x 630 mm (D) x 1150 mm(H) (27-9/16" (W) x 24-13/16" (D) x 45-9/32" (H)) When tray is extended: 813 mm (W) x 630 mm (D) x 1150 mm(H) (32" (W) x 24-13/16" (D) x 45-9/32" (H)) Not including stopper (40 mm (1-37/64")) when attached to machine Weight Approx.
Page 94 Replacing the cartridge in the finisher BEFORE USING THE MACHINE Open the front cover of the finisher. Lower the blue lever in the stapler and slide out the staple cartridge. Pull the empty staple case straight up and out of the cartridge. Insert a new staple case into the cartridge.
Page 95 Make a test print or copy in the staple sort mode to verify that stapling is performed properly. Replacing the cartridge in the saddle stitch finisher Only when the saddle stitch finisher (MX-FN16) is installed. BEFORE USING THE MACHINE Close the front cover of the finisher. Open the lower cover of the saddle stitch finisher.
Page 96 Make sure that the finisher is firmly attached to the machine and that A3, A4R, or B4 (11" x 17", 8-1/2" x 11"R, or 8-1/2" x 14") size paper is loaded. If one of the above paper sizes is not set, test stapling cannot be performed. If test stapling fails to take place, repeat steps 1 to 7.
Page 97: Finisher (3 Trays)
FINISHER (3 TRAYS) equipped with the offset function, which offsets each set of output from the previous set, and the finisher (3 trays) is staple sort function, which staples each set of output. A punch module can also be installed to punch holes in output. PART NAMES Stapler compiler This temporarily stacks paper to be stapled.
Page 98: Specifications
SPECIFICATIONS Name Paper size Paper weight Modes Paper sizes for which offset is possible (Offset is not possible when using middle paper tray.) Amount of offset Paper capacity Upper paper tray Middle paper tray Lower paper tray Power supply Dimensions Weight Power consumption Finisher (3 trays) (MX-FN14)
Page 99 Stapler Allowed paper sizes for stapling Maximum number of sheets for stapling Punch module for finisher (3 trays) Model Hole punching Allowed paper sizes for punching Allowed paper weight for punching Power supply Dimensions Weight *1 Output capacity varies according to environmental conditions of the installation location, type of paper used, and the condition of the machine.
Page 100: Replacing The Staple Cartridge
REPLACING THE STAPLE CARTRIDGE When using the finisher (3 trays), a message will appear on the operation panel when the staple cartridge runs out of staples. Follow the procedure below to replace the staple cartridge. Open the front cover on the left of the finisher.
Page 101 BEFORE USING THE MACHINE Pull the seal that holds the staples straight out. Return the cover to its original position. Put the staple cartridge back into the stapler. Push the staple cartridge in until the tabs engage and then push the lever down until it clicks into place. Close the front cover of the finisher.
Page 102: Inserter
INSERTER The inserter enables blank sheets or printed sheets to be added to copy and print output as covers or inserts without printing. The inserter also allows feeding of heavy paper that cannot be fed from the other trays. Printed output can also be fed one set at a time from the inserter for stapling or punching without performing stapling or staple sorting finishing (see "MANUAL OPERATION OF THE When feeding from the inserter for pamphlet copying (page 2-49), cover or insert copying (page 2-60), or transparency...
Page 103: Specifications
SPECIFICATIONS Name Inserter (MX-CF10) Paper weight 60 to 256 g/m Paper types Plain paper, special paper (transparency film,coloured paper, paper with punch holes, tabbed paper, etc.) (Consult your retailer for more information on special papers that can be used.) Paper size A3, B4, A4, A4R, B5, B5R, A5R, 11"...
Page 104: Manual Operation Of The Inserter
MANUAL OPERATION OF THE INSERTER The inserter can be used for stapling or punching without performing a copy operation. These functions are selected at the operation panel of the inserter. [PUNCH] key When a punch module is installed on the finisher or saddle stitch finisher, punch holes can be added to blank paper or printed paper.
Page 105 Alarm display If the [START] key indicator on the inserter operation panel is blinking and the [PUNCH] key or [STAPLE] key indicator is also blinking or solidly lit, operation will not start when the [START] key is pressed. Resolve the problem as indicated below, depending how the indicators are lit or blinking.
Page 106 Using the inserter For paper sizes that can be stapled or punched, see the finisher and saddle stitch finisher specifications on page 1-51. Some paper types cannot be stapled or punched (see "NOTES" on page 1-54). Do not use these paper types. Paper guide Press the desired mode key.
Page 107: Sharp Osa
Sharp OSA (Open Systems Architecture) is an architecture that enables external applications to be directly connected to a digital multifunction machine over a network. When a digital multifunction machine that supports Sharp OSA is used, the operation panel controls and functions of the machine such as scan send can be linked to an external application.
Page 108: External Account Module (Mx-Amx3)
The two modes for using an external account application operate as explained below. External authentication mode When the [Enable Authentication by External Server] checkbox is selected in "External Account Setting" of "Sharp OSA Settings" in the system settings (administrator), the machine enters external authentication mode. When the machine is powered on in external authentication mode, the machine accesses the external account application and displays the login screen.
Page 109 OFF" (page 1-15). External count mode When only the [External Account Control] setting is enabled in "External Account Setting" of "Sharp OSA Settings" in the system settings (administrator), the machine enters external count mode. Unlike external authentication mode, when the machine is started in "external count mode", the login screen of the external account application is not displayed.
Page 110: Regular Maintenance
MAINTENANCE This section explains how to clean the machine and replace the toner cartridges and stamp cartridge. REGULAR MAINTENANCE To ensure that the machine continues to provide top quality performance, periodically clean the machine. Warning Do not use a flammable spray to clean the machine. If gas from the spray comes in contact with hot electrical components or the fusing unit inside the machine, fire or electrical shock may result.
Page 111 BEFORE USING THE MACHINE Open the automatic document feeder and remove the glass cleaner. Clean the document scanning area on the document glass with the glass cleaner. One scanning area is on the document glass and the other is inside the automatic document feeder. Clean the document scanning area in the automatic document feeder with the glass cleaner.
Page 112: Cleaning The Bypass Feed Roller
BEFORE USING THE MACHINE CLEANING THE BYPASS FEED ROLLER If paper misfeeds frequently occur when feeding or heavy paper through the bypass tray, wipe the surface of the feed roller with a clean soft cloth moistened with water or a neutral detergent. 1-71 Contents...
Page 113: Replacing The Toner Cartridges
REPLACING THE TONER CARTRIDGES Be sure to replace the toner cartridge when the message "Change the toner cartridge." appears. In copy mode Ready to scan for copy. (Toner supply is low.) Ready to scan for copy. (Change the toner cartridge.) If you continue to use the machine without replacing the cartridge, the following message will appear when the toner runs out.
Page 114 It is important to thoroughly shake the supply cartridge for 10 seconds as shown in the diagram in order to ensure proper operation of toner supply system. Open the front cover. Remove the toner cartridge gently. Hold the toner cartridge with both hands as shown in the illustration, and pull it out of the machine.
Page 115 • If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality and performance and there is a risk of damage to the machine. Be sure to use a SHARP-recommended toner cartridge.
Page 116: Replacing The Stamp Cartridge
REPLACING THE STAMP CARTRIDGE If a stamp unit (AR-SU1) is installed on the automatic document feeder and the stamp has become faint, replace the stamp cartridge (AR-SV1). Supplies Stamp cartridge (2 in package) AR-SV1 BEFORE USING THE MACHINE Open the automatic document feeder. Remove the document backplate sheet from the automatic document feeder.
Page 117: Automatic Document Feeder
BEFORE USING THE MACHINE Install a new stamp cartridge. Push the stamp unit back in. Push the stamp unit in until it clicks into place. Close the automatic document feeder to attach the document backplate sheet. When the automatic document feeder is closed, the document backplate sheet on the document glass attaches to the automatic document feeder.
Page 118: Entering Text
ENTERING TEXT This section explains the text entry screen. FUNCTIONS OF THE MAIN KEYS This changes the text entry screen from the lower case screen to the upper case screen. The upper case Caps Caps screen will continue to appear until the [Caps] key is touched again so that it is no longer highlighted. The [Caps] key is convenient when you wish to enter all capital letters.
Page 119 Shows explanations of each key. Help Use this to enter a previously stored text string such as ".com". .com .net .org Text strings are stored in the system settings. ☞ .biz .info http: 7. SYSTEM SETTINGS Touch this key to return to the previous setting screen without entering text. Cancel Touch this key to enter the text that currently appears and return to the previous setting screen.
Page 120: Entering Text From A Keyboard
The layout of the keys in the text entry screen in the touch panel differs slightly from the layout of the keys on the external keyboard. Use a SHARP-recommended external keyboard. For the recommended keyboards, please contact your dealer or nearest authorised service representative.
Page 121: Software Setup
BEFORE USING THE MACHINE SOFTWARE SETUP BEFORE INSTALLING THE SOFTWARE For an introduction to the software that enables the use of the printer and scanner functions, details regarding the type of CD-ROM that contains the software, and installation instructions, see "BEFORE INSTALLING THE SOFTWARE" in the Start Guide.
Page 122: Setup In A Windows Environment
SETUP IN A WINDOWS ENVIRONMENT This section explains how to install the software and configure settings so that the printer and scanner function of the machine can be used with a Windows computer. The section from this page to page 1-85 is also included in the Start Guide. (This section details basic setup procedures.) The instructions from page 1-86 to page 1-108 are not included in the Start Guide.
Page 123: Installing The Printer Driver / Pc-Fax Driver
* The above screen appears when using the "Disc 1" CD-ROM. For the steps that follow, see the appropriate page below for the software that you are installing. INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER • WHEN THE MACHINE IS CONNECTED TO A NETWORK Standard installation: page 1-83 Installation by specifying the machine's...
Page 124: Standard Installation
 Standard installation When the software selection screen appears in step 6 of SOFTWARE)" (page 1-81), perform the steps below. * The above screen appears when using the "Disc 1" CD-ROM. When [Custom installation] is selected, you can change any of the items below. When [Standard installation] is selected, the installation will take place as indicated below.
Page 125 • If the machine is not found, make sure that the machine is powered on and that the machine is connected to the network, and then click the [Re-search] button. • You can also click the [Specify condition] button and search for the machine by entering the machine's name (host name) or IP address.
Page 126 When you are asked whether or not you want the printer to be your default printer, make a selection and click the [Next] button. If you are installing multiple drivers, select the printer driver to be used as the default printer. If you do not wish to set one of the printer drivers as the default printer, select [No].
Page 127  Installation by specifying the machine's address When the machine cannot be found because it is not powered on or otherwise, installation is possible by entering the name (host name) or IP address of the machine. If the machine is being used on an IPv6 network, after you have installed the software as explained below, change the port as explained in "...
Page 128 If the machine is being used on an IPv6 network, enter any numbers or characters. When the model selection window appears, select the model name of your machine and click the [Next] button. • When the PC-Fax driver is being installed, this screen does not appear. Go to the next step. •...
Page 129 Follow the on-screen instructions. Read the message in the window that appears and click the [Next] button. Installation begins. • If you are using Windows Vista/Server 2008/7 If a security warning window appears, be sure to click [Install this driver software anyway]. •...
Page 130  Printing using the IPP function and the SSL function The IPP function can be used to print to the machine over a network using HTTP protocol. When the machine is in a remote location, this function can be used in place of the fax function to print a higher quality image than a fax.
Page 131 If your computer and the machine are connected to the same local area network, you can click the [Search] button to search for the machine. The machine's URL will appear. Select the URL and click the [OK] button. You will return to the above screen and the machine's URL will be automatically entered.
Page 132: When The Machine Will Be Connected With A Usb Cable
WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE Supported operating systems: Windows 2000 * Administrator's rights are required to install the software. • Make sure that a USB cable is not connected to your computer and the machine. If a cable is connected, a Plug and Play window will appear.
Page 133 When you are asked if you wish to install the display fonts, select an answer and click the [Next] button. Follow the on-screen instructions. Read the message in the window that appears and click the [Next] button. When the installation completed screen appears, click the [OK] button. •...
Page 134 When installing the PCL5e printer driver, PS printer driver, PPD driver, or PC-Fax driver Installation is possible even after the USB cable has been connected. When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL below.
Page 135 • When the PC-Fax driver is being installed, this screen does not appear. Go to the next step. • The PS3 expansion kit is required to use the PS printer driver or the PPD driver. Select whether or not you wish the printer to be your default printer and click the [Next] button.
Page 136 • After installation, see "CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE MACHINE" (page 1-98) to configure the printer driver settings. • Make sure that the port of the installed driver is the same as the port used by the PCL6 printer driver. The port used by the printer driver of the machine is indicated by a checkmark on the [Ports] tab of the printer driver properties window.
Page 137: Using The Machine As A Shared Printer
USING THE MACHINE AS A SHARED PRINTER If you are going to use the machine as a shared printer on a Windows network with the printer driver or the PC-Fax driver installed on a print server, follow the steps below to install the printer driver or the PC-Fax driver on the client computers.
Page 138 If the shared printer does not appear in the list, check the settings on the print server. Perform steps 5 through 12 on page 1-87 to continue the installation. In the printer driver selection screen, be sure to select the same type of printer as the printer driver installed on the print server.
Page 139 CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE MACHINE After installing the printer driver, you must configure the printer driver settings appropriately for the options that have been installed and the size and type of paper loaded in the machine. Follow the steps below to configure the printer driver.
Page 140 To cancel the image settings, click the [Cancel] button. Click the [OK] button in the printer properties window. If automatic configuration fails • You can check the options that are installed and the tray settings by printing out the "All Custom Setting List" in the system settings of the machine.
Page 141  When the PPD driver is installed Click the [Start] button ( • In Windows XP/Server 2003, click the [start] button and then click [Printers and Faxes]. • In Windows 2000, click the [Start] button, select [Settings], and then click [Printers]. If [Printers and Faxes] does not appear in the [start] menu in Windows XP, click the [start] button, click [Control Panel], click [Printers and Other Hardware], and then click [Printers and Faxes].
Page 142: Installing The Printer Status Monitor
For the procedures for using the Printer Status Monitor, see the Help file. Follow these steps to view the Help file: Click the Windows [start] button, select [All Programs] ([Programs] in Windows 2000), select [SHARP Printer Status Monitor] and then select [Help].
Page 143: Installing The Scanner Driver
When the scanner driver is installed, the "Select Device" utility is also installed. The IP address of the machine is configured in the scanner driver using "Select Device". Click the [start] button, select [All Programs] ([Programs] in Windows 2000), select [SHARP MFP TWAIN K], and then select [Select Device]. /Server 2003 /Vista /Server 2008 "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL...
Page 144 This completes the configuration of the scanner driver. BEFORE USING THE MACHINE Click the [Search] button. If you know the IP address, you can click the [Input] key and enter the IP address without searching. Select the IP address of the machine from the "Address"...
Page 145: Installing The Ps Display Fonts
INSTALLING THE PS DISPLAY FONTS Fonts that can be used by the PS printer driver are contained on the "PRINTER UTILITIES" CD-ROM that accompanies the PS3 expansion kit. Install these fonts as needed for the PS printer driver. Insert the "PRINTER UTILITIES" CD-ROM that accompanies the PS3 expansion kit into your computer's CD-ROM drive.
Page 146: Changing The Port
CHANGING THE PORT When using the machine in a Windows environment, follow the steps below to change the port when you have changed the IP address of the machine or have installed the PC-Fax driver when the machine is connected with a USB cable. If the machine is being used on an IPv6 network, follow the steps 1 to 3 below and see Port"...
Page 147 • The "SC2 TCP/IP Port" is added when the printer driver is installed using a "Standard installation", or a "Custom installation" with "LPR Direct Print (Specify Address/Auto Search)" selected. • If the printer driver is installed using a "Custom installation" with "IPP" selected, the [SC-Print2005 Port] is added. If you need to change the printer port when the machine is connected to an intranet or a wide area network (WAN) using the IPP function, select [SC-Print2005 Port], click the [New Port] button, and follow the on-screen instructions to create the port again.
Page 148  Changing to a Standard TCP/IP Port If the machine is being used on an IPv6 network, change the port to a port created using the operating system's "Standard TCP/IP Port". Follow steps 1 to 3 of Click the [Next] button. "CHANGING THE PORT"...
Page 149 Click the [Next] button in the screen of step 5. Click the [Finish] button. Click the [Close] button in the screen of step 2. When using a port created with "Standard TCP/IP Port" In the screen that appears after you click the [Configure Port] button in the screen of step 3, make sure the [SNMP Status Enabled] checkbox is not selected ( possible to print correctly.
Page 150: Setup In A Macintosh Environment
SETUP IN A MACINTOSH ENVIRONMENT This chapter explains how to install the PPD file to enable printing from a Macintosh and how to configure the printer driver settings. ☞ MAC OS X: this page (v10.2.8, v10.3.9, v10.4.11, v10.5 - 10.5.8. v10.6) ☞...
Page 151 The Licence Agreement window will appear. Make sure that you understand the contents of the licence agreement and then click the [Continue] button. A message will appear asking you if you agree to the terms of the licence. Click the [Agree] button. If the licence appears in the different language, change the language in the language menu.
Page 152 Double-click the [Printer Setup Utility] icon ( ). If you are using Mac OS X v10.2.8, double-click the [Utilities] folder and then double-click the [Print Centre] icon. If this is the first time you are installing a printer driver on your computer, a confirmation message will appear. Click the [Add] button.
Page 153 (3) Select the PPD file of the machine. • If you are using Mac OS X v10.3.9, select [Auto Select]. • If you are using Mac OS X v10.2.8, select [Sharp] and click the PPD file of your model. (4) Click the [Add] button.
Page 154 Select the machine configuration. If you selected [Auto Select] in (3) of step 14, the machine configuration is detected and automatically configured. Check the configured settings to make sure they are correct. (1) Select [Installable Options]. If you are using Mac OS X v10.5 to 10.5.8 or v10.6, it does not appear. (2) Select the options that are installed on the machine.
Page 155 (IP address or domain name) and the queue name. Enter "ipp" in "Queue". (3) Select [Sharp] in "Print Using" and click the PPD file of your model. If you are using Mac OS X v 10.5 to 10.5.8 or v10.6, select [Select a driver to use] (or [Select Printer Software]) from "Print Using"...
Page 156: Mac Os
MAC OS 9.0 - 9.2.2 • If you are using Mac OS 9.0 to 9.2.2, make sure that "LaserWriter 8" has been installed and that the "LaserWriter 8" checkbox is selected in "Extensions Manager" in "Control Panels". If not, install it from the system CD-ROM supplied with your Macintosh computer.
Page 157 • If the above dialog box does not appear and you return to the "Chooser" dialog box, follow these steps to select the PPD file manually. (1) Make sure that the machine is selected in the "Select a PostScript Printer" list, and then click the [Setup] button followed by the [Select PPD] button.
Page 158 Select the machine configuration. (1) Select the options that are installed on the machine. (2) Select [Options 2] from the menu to change the screen and continue selecting the options that have been installed on the machine. (3) Click the [OK] button. You can check the options that are installed on the machine by printing out the "All Custom Setting List"...
Page 159: Removing The Software
REMOVING THE SOFTWARE To remove the printer driver or software installed using the installer, follow the steps below. Windows Click the [start] button and then click [Control Panel]. In Windows 2000, click the [Start] button, point to [Settings], and click [Control Panel]. Click [Uninstall a program].
Page 160 Double-click the [MacOS] folder. Double-click the [Installer] icon ( Select [Remove] in the Install menu and click the [Remove] button. BEFORE USING THE MACHINE 1-119 Contents...
Page 161 CHAPTER 2 COPIER This chapter provides detailed explanations of the procedures for using the copy function. BEFORE USING THE MACHINE AS A COPIER BASE SCREEN OF COPY MODE ....2-3 COPYING SEQUENCE .
Page 162: Convenient Copy Functions
COPYING BOTH SIDES OF A CARD ON ONE SHEET OF PAPER (Card Shot) ....2-82 PRINTING THE DATE AND A STAMP ON COPIES (Stamp) ......2-85 •...
Page 163: Before Using The Machine As Acopier
BEFORE USING THE MACHINE AS A COPIER This section provides information that you should know before using the machine as a copier. BASE SCREEN OF COPY MODE Touch the [COPY] key in the touch panel to open the base screen of copy mode. The base screen shows messages and keys necessary for copying, and settings that have been selected.
Page 164: Tray During Paper Feeding
Paper select display This shows the size of paper loaded in each tray. For the bypass tray, the paper type appears above the paper size. The selected tray is highlighted. The approximate amount of paper in each tray is indicated by .
Page 165 Customizing displayed keys Special mode keys and other keys can be displayed in the base screen. By assigning frequently used functions to these keys, you can access the functions with a single touch. To change the function that is assigned to a key, use "Customize Key Setting"...
Page 166: Copying Sequence
COPYING SEQUENCE This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy operation takes place smoothly. For detailed procedures for selecting the settings, see the explanation of each setting in this chapter. Exposure Auto Copy Ratio...
Page 167: Output Settings
Output Offset Tray Offset Sort Staple Saddle Sort Stitch Group Special Modes Dual Page Margin Shift Erase Pamphlet Copy Build Transparency Covers/Inserts Multi Shot Inserts Book Copy Tab Copy Card Shot Number of copies (sets) setting Plain 8½ 11 Start scanning the original(s) and making copies. Press the [START] key.
Page 168 • When one or more special modes are selected, the list of the selected special modes. This lets you check what special modes are selected and the settings of each mode. ☞ Checking what special modes are selected • To store a copy job using the document filing function, select copy settings and then touch the [File] key or the [Quick File] key.
Page 169: Originals
ORIGINALS CHECKING THE ORIGINAL SIZE When [Auto] appears in the [Original] key, the size of the placed original is automatically detected. The machine automatically detects the original size when an original is placed and displays the size in the [Original] key in the base screen. Example of base screen The original size is displayed.
Page 170: Standard Original Placement Orientations
Standard original placement orientations Place originals in the document feeder tray or on the document glass so that the top and bottom of the original are oriented as shown in the illustration. If the original is not oriented correctly and a function such as stapling is selected, the staple positions may not be correct.
Page 171: Paper Trays
PAPER TRAYS The machine is set to automatically select a tray that has the same size of paper as the size of the placed original (automatic paper tray selection). If the correct paper size is not selected or you wish to change the paper size, you can select the paper tray manually. Exposure Auto Copy Ratio...
Page 172: Basic Procedure For Making Copies
BASIC PROCEDURE FOR MAKING COPIES This section explains the basic procedures for making copies, including selection of the copy ratio and other copy settings. MAKING COPIES USING THE AUTOMATIC DOCUMENT FEEDER TO MAKE COPIES This section explains how to make copies (1-sided copies of 1-sided originals) using the automatic document feeder. Indicator line Exposure...
Page 173 Plain 8½ 11 • Up to 999 copies (sets) can be set. • A single copy can be made even if "0" appears for the number of copies. If an incorrect number of copies is set... Press the [CLEAR] key ( Press the [START] key.
Page 174: Making A Copy Using The Document Glass
MAKING A COPY USING THE DOCUMENT GLASS To make a copy of a book or other thick original that cannot be scanned with the automatic document feeder, open the automatic document feeder and place the original on the document glass. This section explains how to make a copy (1-sided copy of a 1-sided original) using the document glass.
Page 175 Plain 8½ 11 • Up to 999 copies (sets) can be set. • A single copy can be made even if "0" appears for the number of copies. If an incorrect number of copies is set... Press the [CLEAR] key ( Press the [START] key.
Page 176: Automatic 2-Sided Copying
AUTOMATIC 2-SIDED COPYING USING THE AUTOMATIC DOCUMENT FEEDER TO MAKE 2-SIDED COPIES Originals Copies Automatic 2-sided copying of 1-sided originals Copying onto both sides of a sheet saves paper. Indicator line Exposure Auto Copy Ratio Original Paper Select 100% Auto Originals Copies Automatic 2-sided copying of 2-sided...
Page 177 2-Sided Copy To make 2-sided copies of a 1-sided portrait original placed horizontally, or to invert the reverse side with respect to the front side when copying a 2-sided original, touch the [Binding Change] key. ☞ Using the [Binding Change] key Exposure Auto Copy Ratio...
Page 178: Using The [Binding Change] Key
Using the [Binding Change] key Originals Binding Change is used The reverse side is upside down. Select this when the pages will be bound into a tablet. 2-18 COPIER Binding Change is not used The reverse side is not upside down.
Page 179: Automatic 2-Sided Copying Using The Document Glass
AUTOMATIC 2-SIDED COPYING USING THE DOCUMENT GLASS Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size. Exposure Auto Copy Ratio...
Page 180 2-Sided Copy The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass. Exposure Auto Copy Ratio Original Paper Select 100% Auto Depending on the size of the placed original, there may be cases where the same size of paper as the original is not selected automatically.
Page 181 Place next original. Press [Start]. When finished, press [Read-End]. To cancel scanning of the original and copying... Press the [STOP] key ( System Settings (Administrator): Initial Status Settings (2-Sided Copy) The default 2-sided copy mode can be changed. Touch the [Read-End] key. Read-End 2-21 COPIER...
Page 182: Changing The Exposure And Original Image Type
CHANGING THE EXPOSURE AND ORIGINAL IMAGE TYPE The exposure and original image type can be selected to obtain a clear copy. AUTOMATIC ADJUSTMENT OF THE EXPOSURE AND ORIGINAL TYPE Automatic exposure adjustment operates by default to automatically adjust the exposure level and original type as appropriate for the original being copied.
Page 183 Exposure Auto Manual Original Image Type Text Prtd.Photo Printed Photo Guidelines for the exposure level when [Text] is selected: 1 to 2: Dark originals such as a newspaper Normal density originals 4 to 5: Originals written in pencil or light coloured text Exposure Auto Manual...
Page 184: Reduction/Enlargement/Zoom
REDUCTION/ENLARGEMENT/ZOOM AUTOMATIC RATIO SELECTION (Auto Image) This section explains the automatic ratio selection function (Auto Image), which automatically selects the ratio to match the paper size. When the paper tray is manually changed, the [Auto Image] key appears in the base screen of copy mode. Touch the [Auto Image] key to have the reduction or enlargement ratio automatically selected based on the original size and the selected paper size.
Page 185: Manually Selecting The Ratio (Preset Ratios/Zoom)
MANUALLY SELECTING THE RATIO (Preset ratios/Zoom) Touch the [Copy Ratio] key in the base screen of copy mode to select one of five (or four) preset enlargement ratios or five (or four) preset reduction ratios (maximum 400%, minimum 25%). In addition, the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%. Copy Ratio Zoom 100%...
Page 186 Copy Ratio Zoom 100% Auto Image XY Zoom When the automatic document feeder is used, the vertical and horizontal ratio selection ranges are both 25% to 200%. To return the ratio to 100%... To return the ratio setting to 100%, touch the [Copy Ratio] key to display the ratio menu and then touch the [100%] key. System Settings (Administrator): Add or Change Extra Preset Ratios Two enlargement preset ratios (101% to 400%) and two reduction preset ratios (25% to 99%) can be added.
Page 187: Enlarging/Reducing The Length And Width Separately (Xy Zoom)
ENLARGING/REDUCING THE LENGTH AND WIDTH SEPARATELY (XY Zoom) The XY Zoom feature allows the horizontal and vertical copy ratios to be changed separately. Both the horizontal and vertical ratios can be set from 25% to 400% in increments of 1%. Touch the [Copy Ratio] key in the base screen of copy mode and then follow the steps below.
Page 188: Original Sizes
ORIGINAL SIZES SPECIFYING THE ORIGINAL SIZE When the original size is a non-standard size or is not detected correctly, manually specify the original size. Touch the [Original] key in the base screen of copy mode and then follow the steps below. Specifying an inch original size Original Auto...
Page 189: Storing Frequently Used Original Sizes
(1), (2) Original Size Input STORING FREQUENTLY USED ORIGINAL SIZES You can save special original sizes that you frequently use. This section explains how to store, retrieve, change, and delete special original sizes. Storing original sizes (editing/clearing) Up to 12 special original sizes can be stored. Touch the [Original] key in the base screen of copy mode and then follow the steps below.
Page 190 Original Custom Size X254 Y210 Recall If you wish to edit or clear a previously stored key... Touch the key that you want to edit or clear. The following screen will appear. • To edit the key, touch the [Amend] key and go to the next step. •...
Page 191: Retrieving A Stored Original Size
Retrieving a stored original size To retrieve a stored original size, touch the [Original] key in the base screen of copy mode and perform the steps below. Original Auto Manual 216x340 216x343 Size Input Custom Size (2) (1) Original Custom Size X254 Y210 Recall To cancel the operation...
Page 192: Output
OUTPUT To select output functions and the output tray, touch the [Output] key in the base screen of copy mode. Output functions that can be selected are sort, group, offset, staple sort, saddle stitch, and punch. All explanations of the settings below assume that a saddle stitch finisher is installed.
Page 193 The keys that appear will vary depending on what peripheral devices are installed. In addition, it may not be possible to select some keys depending what peripheral devices are installed. If your screen is different from the screen of previous page, see the screens that follow. Example The screen when a finisher or saddle stitch finisher is not installed.
Page 194: Output Modes
OUTPUT MODES This section explains the output modes. Sort mode This is used to sort (collate) output into sets. Example: Sorting the output into 5 sets Originals Set the number of copies (5). Touch the [Output] key. Output Touch the [Sort] key. Sort Press the [START] key.
Page 195: Staple Sort Function / Saddle Stitch Function
Staple sort function / Saddle stitch function The staple sort function sorts output into sets, staples each set, and delivers the sets to the tray. The saddle stitch function staples each set in 2 places at the centreline and folds the stapled set. The relations between the stapling positions, paper orientation, permitted paper sizes for stapling, and number of sheets that can be stapled are shown below.
Page 196 Stapling positions Vertically-oriented paper Saddle stitch (only with saddle stitch finisher) *1 Finisher or saddle stitch finisher When the top left corner or the bottom left corner of the paper is stapled in one place, the staple is placed diagonally, except in the following cases (Diagonal stapling): •...
Page 197: Paper Folding Function
Paper folding function When a saddle stitch finisher is installed, the fold function can be used to fold printed output in half. Paper sizes that can be folded using the paper folding function are A4R, B4, A3, 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17", and 8K.
Page 198: Punch Function
Punch function If an optional punch module is installed, holes can be punched in output. Paper size that can be punched is B5R to A3 (7-1/4" x 10-1/2" to 11" x 17"). However, A3W (12" x 18") sized paper and special media such as transparency film and tab paper cannot be used.
Page 199: Making Copies Using The Bypass Tray
MAKING COPIES USING THE BYPASS TRAY In addition to plain paper, the bypass tray allows you to make copies on transparency film, tab paper, and other special media. For detailed information on paper that can be loaded in the bypass tray, see (page 1-27) in "1.
Page 200: Set The Paper Size
Paper Select Bypass Tray Type/Size Setting Select the paper type. Plain Pre-Printed Recycled Pre-Punched Colour Thin Paper Heavy Paper Transparency Tab Paper Heavy Paper : 106 - 209 g/m (28 lbs.bond, -110 lbs.index) If tab paper is selected, check the size. Touch the [Auto-Inch] key or the [Auto-AB] key. When you have finished checking/changing the setting, touch the [OK] key.
Page 201 Press the [START] key. Scanning begins. • If the originals were placed in the document feeder tray, the originals are copied. • If you placed the originals on the document glass, scan each page one page at a time. When using sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then press the [Read-End] key.
Page 202: Special Modes
SPECIAL MODES This chapter explains Margin Shift, Erase, Dual Page Copy, and other special modes. SPECIAL MODES When the [Special Modes] key is pressed in the base screen, the special modes menu screen appears. The special modes menu consists of two screens. Touch the mode settings, touch the [OK] key in the special modes menu screen to complete the settings and return to the base screen of copy mode.
Page 203 Special modes menu (2nd screen) [Stamp] key ☞ PRINTING THE DATE AND A STAMP ON COPIES (Stamp) (page 2-85) [Image Edit] key ☞ [Image Edit] KEY (page 2-105) [Sharpness] key ☞ ADJUSTING THE SHARPNESS OF AN IMAGE (Sharpness) (page 2-116) [File] key This saves a job in a folder of the document filing function.
Page 204 [OK] key and [Cancel] key In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as follows: Special Modes Margin Shift (A) Enter the selected special mode settings and return to the base screen of copy mode. (B) Enter the selected special mode settings and return to the special modes menu screen.
Page 205: Adding Margins (Margin Shift)
ADDING MARGINS (Margin Shift) This function is used to shift the copy image right, left or down to adjust the margin. This is convenient when you wish to bind the copies with a string or in a binder. Shifting the image to the right so the copies can be bound at the left edge with a string Margin shift positions Left edge...
Page 206 Press the [START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.
Page 207: Erasing Peripheral Shadows (Erase)
ERASING PERIPHERAL SHADOWS (Erase) The erase function is used to erase shadows around the edges of copies that occur when copying thick originals or books. When a thick book is copied Shadows appear here Erase modes Edge Erase Place the original. Place the original face up in the document feeder tray, or face down on the document glass.
Page 208 Special Modes Erase Edge Centre Edge+Centre Erase Erase Erase Side Erase Press the [START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [START] key.
Page 209: Copying Each Facing Page Of Abound Document (Dual
COPYING EACH FACING PAGE OF A BOUND DOCUMENT (Dual Page Copy) The dual page copy function produces separate copies of two document pages that are placed side by side on the document glass. This function is useful when making copies of the facing pages of a book or other bound document. Copying the facing pages of a book or bound document Book or bound document Exposure...
Page 210 Special Modes Margin Shift Erase Pamphlet Copy Build Transparency Covers/Inserts Inserts Book Copy Tab Copy Press the [START] key. Copying will begin. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.
Page 211: Making Copies In Pamphlet Format (Pamphlet Copy)
MAKING COPIES IN PAMPHLET FORMAT (Pamphlet Copy) This function copies 2 original pages onto the front side and 2 original pages onto the reverse side of each sheet of paper so that the copies can be folded at the centreline to form a pamphlet. This function is convenient for arranging copies into an attractive booklet or pamphlet.
Page 212 Special Modes Pamphlet Copy Original Left 1-Sided 2-Sided Binding Binding Pamphlet Copy Cover Setting Paper Tray Bypass Tray Plain • When the cover paper is fed from the inserter, the cover cannot be copied on. • Two-sided copying is not possible on label sheets, transparency film, and tabbed paper. When copying on a cover, do not select a tray that has one of these types of paper.
Page 213 Special Modes Pamphlet Copy Original Left 1-Sided 2-Sided Binding Binding Press the [START] key. Copying will begin. If you are using the document glass, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning of the original and copying...
Page 214: Copying A Large Number Of Originals At Once (Job Build)
COPYING A LARGE NUMBER OF ORIGINALS AT ONCE (Job Build) When copying a very large number of originals, this function allows you to divide the originals into sets and feed each set through the automatic document feeder one set at a time. Use this function when you wish to copy all of the originals as a single job but the number of originals exceeds the maximum number that can be inserted.
Page 215 Insert the next set of originals and press the [START] key. Repeat this step until all originals have been scanned. The copy settings (Exposure, Paper Select, and Copy Ratio only) can be changed for each set of originals. If you need to change the copy setting, follow the steps in "Changing the copy settings for each set of originals".
Page 216 Changing the copy settings for each set of originals The copy settings (Exposure, Paper Select, and Copy Ratio only) can be changed for each set of originals. Perform the step below before pressing the [Start] key to scan the originals in step 4 above. Place next original and press [Start].
Page 217: Using Two Machines To Make A Large Number Of Copies (Tandem Copy)
USING TWO MACHINES TO MAKE A LARGE NUMBER OF COPIES (Tandem Copy) Two machines connected to the same network can be used to run a large copy job in parallel. Each machine prints half of the copies, reducing the time required to complete the job. Master machine and slave machine In the following explanation, the master machine is the machine that is used to scan the originals.
Page 218 If an incorrect number of copies is set... Press the [CLEAR] key ( Press the [START] key. Copying will begin. If you are using the document glass, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.
Page 219 In this situation... A punch module is installed on the master machine but not on the slave machine. •Copying without punching: tandem copy is possible. •Copying with punching: tandem copy is not possible. In this way, if tandem copying is executed using a function that the slave machine does not have, a message will appear. To have the master machine make all copies, touch the [OK] key.
Page 220: Using A Different Paper Type For Covers (Covers/Inserts)
USING A DIFFERENT PAPER TYPE FOR COVERS (Covers/Inserts) A different type of paper can be inserted in positions corresponding to front and back covers of a copy job when the automatic document feeder is used. A different type of paper can also be automatically added as an insert at specified pages.
Page 221: Inserting Covers In Copies (Cover Settings)
INSERTING COVERS IN COPIES (Cover Settings) A different type of paper can be inserted at the positions corresponding to the front and back covers of a copy job. This is useful for arranging documents in an attractive format and for using a different type of paper as a cover on an estimate sheet or similar document.
Page 222 Covers/Inserts Front Cover Setting Paper Tray Bypass Tray Plain • If the cover will be copied on, label sheets, transparency film, and tab paper cannot be used. If not copied on, tab paper can be inserted. • When the cover paper is fed from the inserter, the cover cannot be copied on. To cancel cover settings...
Page 223 Special Modes Covers/Inserts Cover Setting Insertion Front Cover Type A Insertion Back Cover Type B Tray Settings Press the [START] key. Copying of the originals in the document feeder tray begins. To cancel scanning and copying... Press the [STOP] key ( •...
Page 224: Inserting Insert Sheets In Copies (Insert Settings)
INSERTING INSERT SHEETS IN COPIES (Insert Settings) You can have different paper automatically inserted as inserts at specified pages of copies. Two types of paper can be used as inserts, and the insertion positions can be specified separately for each. Covers can be used in combination with inserts.
Page 225 • If both sides of the insert will be copied on, label sheets, transparency film, and tab paper cannot be used. If not copied on, tab paper can be inserted. • When the insert paper is fed from the inserter, the insert cannot be copied on. •...
Page 226 Special Modes Covers/Inserts Cover Setting Insertion Front Type A Cover Insertion Back Cover Type B Tray Settings Covers/Inserts Insertion Settings Insertion Page Insertion Insertion Type A Type B Bypass Tray 1 Tray Plain Plain If both sides of the insert will be copied on, label sheets, transparency film, and tab paper cannot be used. If not copied on, tab paper can be inserted.
Page 227: Changing Cover/Insert Settings
Special Modes Covers/Inserts Cover Setting Insertion Front Type A Cover Insertion Back Cover Type B Tray Settings Press the [START] key. Copying of the originals in the document feeder tray begins. To cancel scanning and copying... Press the [STOP] key ( •...
Page 228: Changing Cover/Insert Settings
CHANGING COVER/INSERT SETTINGS (Page Layout) Cover settings and insert settings can be combined. This section explains how to check completed cover and insert insertion page settings, and change or delete insertion pages. Changing insert A from page 4 to page 5 4th page, insert A 7th page, insert B 9th page, insert B...
Page 229 Example: Touch insert A at page 4 Covers/Inserts Page Layout Insertion Insertion Insertion Type A Type B Type B Icons : Copy on front side only : Copy on reverse side only : 2-sided copy : Do not copy For inserts, the insertion page also appears. * represents a page number.
Page 230 Covers/Inserts Insertion Amend Insertion Page Insertion Insertion Type A Type B Bypass Tray 1 Tray Plain Plain Special Modes Covers/Inserts Cover Setting Insertion Front Cover Type A Insertion Back Cover Type B Tray Settings Change the settings for insert type A/B. The settings are changed in the same way as they are initially configured.
Page 231: Adding Inserts When Copying On Transparency Film
ADDING INSERTS WHEN COPYING ON TRANSPARENCY FILM (Transparency Inserts) When copying on transparency film, the sheets may stick together due to static electricity. The transparency inserts function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the sheets easy to handle.
Page 232 Special Modes Transparency Inserts Paper Tray Print on Insert Sheets Tray1 Plain Press the [START] key. Copying will begin. To cancel scanning and copying... Press the [STOP] key ( • The number of copies cannot be selected in this mode. •...
Page 233: Copying Multiple Originals Onto One Sheet (Multi Shot)
COPYING MULTIPLE ORIGINALS ONTO ONE SHEET (Multi Shot) Multiple original pages can be copied onto a single sheet of paper in a uniform layout. Select 2in1 to copy two original pages onto one sheet, or 4in1 to copy four original pages onto one sheet. This function saves paper and is convenient when you wish to present multiple pages in a compact format, or show a view of all pages in a document.
Page 234 (3) (2) Special Modes Multi Shot 2in1 4in1 Press the [START] key. Copying will begin. If you are using the document glass, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying...
Page 235: Copying A Pamphlet (Book Copy)
COPYING A PAMPHLET (Book Copy) This function is used to make a copy of the two facing pages of an open book or other bound document. Copies made with this function can be folded at the centre to create a booklet. This function is convenient for arranging copies into an attractive booklet or pamphlet.
Page 236 Special Modes Book Copy Left Right Binding Binding Cover settings cannot be selected if insertion of covers and inserts is disabled in the system settings (administrator). Book Copy Cover Setting Paper Tray Bypass Tray Plain • If the cover will be copied on, label sheets, transparency film, and tab paper cannot be used. •...
Page 237 Special Modes Book Copy Left Right Binding Binding Press the [START] key to scan the first original. Scanning begins. Scan the remaining original pages in the following order: Opened inside of front cover and 1st page Opened 2nd and 3rd page ·...
Page 238 Place next original. Press [Start]. When finished, press [Read-End]. To cancel scanning and copying... Press the [STOP] key ( • Four original pages will be copied onto each sheet of paper. Blank pages will be automatically added at the end if the total number of original pages is not a multiple of four.
Page 239: Copying Captions Onto Tab Paper (Tab Copy)
COPYING CAPTIONS ONTO TAB PAPER (Tab Copy) Captions can be copied onto the tabs of tab paper. Prepare appropriate originals for the tab captions. These instructions explain the procedure for copying captions when tab paper is loaded into the bypass tray. Prepare originals that match the tab positions.
Page 240: Tab Copying With A Right Binding
Tab copying with a right binding Originals Originals Final image Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the [Tab Copy] key.
Page 241 The width of the tab paper can be as wide as A4 width (210 mm) plus 20 mm (or 8-1/2" x 11" paper (8-1/2") plus 5/8"). Press the [START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [START] key.
Page 242: Copying Both Sides Of A Card On One Sheet Of Paper (Card Shot)
COPYING BOTH SIDES OF A CARD ON ONE SHEET OF PAPER (Card Shot) When copying a card, this function allows you to copy the front and reverse sides together onto a single sheet of paper. This function is convenient for making copies for identification purposes and helps save paper. Originals Front Back...
Page 243 Special Modes Card Shot (25~210) (25~210) Press the [START] key to scan the front side of the card. To cancel scanning... Press the [STOP] key ( Turn the card over and press the [START] key to scan the reverse side of the card.
Page 244 • The original must be placed on the document glass. • Copying is only possible on standard size paper. • XY Zoom cannot be used when using this function. • The image cannot be rotated when using this function. To cancel card shot... Touch the [Cancel] key in the screen of step 4.
Page 245: Printing The Date And A Stamp On Copies (Stamp)
PRINTING THE DATE AND A STAMP ON COPIES (Stamp) Use this function to print the date, a stamp, the page number, and text on copies. In addition, specific text can be added to a copy as a watermark (Watermark). Six printing positions are available: top left, top centre, top right, bottom left, bottom centre, and bottom right. The printing positions are separated into areas that are used for the date, page number and text (A below), and areas that are used for a stamp (B below).The watermark is printed at the centre of the paper.
Page 246: General Procedure For Using Stamp
GENERAL PROCEDURE FOR USING STAMP To select stamp settings, follow the steps below. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens.
Page 247 Special Modes Stamp Date Stamp Page Text Numbering Watermark Special Modes Stamp Date Stamp Page Text Numbering Watermark Special Modes Stamp 2-Sided Original Type Original Orientation Print on Covers/Inserts when Copying on Covers/Inserts • When copying on covers/inserts is not selected, printing will not take place even if a checkmark appears. •...
Page 248 Press the [START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.
Page 249: Adding The Date To Copies (Date)
ADDING THE DATE TO COPIES (Date) The date can be printed on copies. The position of the date, format, and page (first page only or all pages) can be selected. Example: Printing APRIL 4, 2010 in the top right corner of the paper. Touch the [Date] key in the stamp selection screen.
Page 250 Stamp Date YYYY/MM/DD 04/APR/2010 MM/DD/YYYY Date Change DD/MM/YYYY MM DD, YYYY To cancel the date print setting... Touch the [Cancel] key in the screen of step 2. Select the pages that the date will be printed on and touch the [OK] key. Cancel Select printing on the first page only, or printing on all pages.
Page 251: Stamping Copies (Stamp)
STAMPING COPIES (Stamp) Text such as "CONFIDENTIAL" can be printed in white on a dark background as a "stamp" on copies. The position, size, density, and pages (first page only or all pages) can be selected for a stamp. Printing "CONFIDENTIAL" in the top left corner of a copy The following 12 selections are available for the stamp text.
Page 252 Stamp Stamp CONFIDENTIAL PRIORITY FOR YOUR INFO. DO NOT COPY URGENT DRAFT PRELIMINARY FINAL IMPORTANT COPY TOP SECRET PLEASE REPLY Stamp Stamp CONFIDENTIAL PRIORITY FOR YOUR INFO. DO NOT COPY URGENT DRAFT PRELIMINARY FINAL IMPORTANT COPY TOP SECRET PLEASE REPLY Stamp Stamp CONFIDENTIAL...
Page 253: Printing Page Numbers On Copies
PRINTING PAGE NUMBERS ON COPIES (Page Numbering) Page numbers can be printed on copies. The position, format, and page number can be selected for page numbering. Printing the page number at the bottom centre of the paper. Touch the [Page Numbering] key in the stamp selection screen. See steps 1 to 4 of "GENERAL PROCEDURE FOR USING Stamp...
Page 254 Stamp Page Numbering Page Numbering Format Total Page 1,2,3.. (1),(2),(3).. -1-,-2-,-3-.. P.1,P.2,P.3.. <1>,<2>,<3>.. 1/5,2/5,3/5.. Stamp Page Number Auto Manual First Number Last Number Auto Printing Starts from Page • A "Last Number" smaller than the "First Number" cannot be set. •...
Page 255 Stamp Covers/Inserts Counting Count Front Cover Count Inserts Count Back Cover • When the checkboxes are selected counted as one page in the case of 1-sided copying, or two pages in the case of 2-sided copying. However, when the body sheets are 1-sided copies and the inserted sheets are 2-sided copies, each body sheet is counted as one page and each inserted sheet is counted as two pages.
Page 256 • When Page Numbering is selected, copying in group mode is not possible. The mode automatically changes to sort mode. • When the page number printing position is set to the right side or left side and pamphlet copy or book copy is used, the print position is changed so that the page numbers always appear on the outer side of each opened page (the left and right sides of the opened pages).
Page 257: Printing Text On Copies (Text)
PRINTING TEXT ON COPIES (Text) Entered text can be printed on copies. Up to 30 frequently used text strings can be stored. Example: Printing "April 2010 Planning Meeting" in the top left corner of the paper Touch the [Text] key in the stamp selection screen. See steps 1 to 4 of "GENERAL PROCEDURE FOR USING Stamp...
Page 258 Stamp Text AAA AAA Pre-Set Recall Store/Delete Direct Entry Text settings can also be configured in the Web pages. Click [Application Settings], [Copy settings] and then [Text Settings (Stamp)] in the Web page menu. To cancel a text setting... Touch the [Cancel] key in the screen of step 2. Select the pages to be printed on and touch the [OK] key.
Page 259 Storing, editing, and deleting text strings Touch the [Text] key in the stamp selection screen. See steps 1 to 4 of "GENERAL PROCEDURE FOR USING Stamp Text Pre-Set Recall Store/Delete Stamp Text Store/Delete No.01 AAA AAA No.02 BBB BBB No.03 CCC CCC No.04 DDD DDD No.05 No.06...
Page 260 Stamp Stamp Text Text ,----~Q Store/Delete Store/Delete No.01 AAA AAA No.02 BBB BBB = = = d = = = d F ====J F====J1 No.03 CCC CCC No.04 No.05 No.06 No.07 No.08 ====,JI No.09 No.10 Touch the [Back] key. You will return to the screen of step 2. Back ["11;;: To copy using a stored text string, continue from step 2 of...
Page 261: Checking The Stamp Layout (Layout)
CHECKING THE STAMP LAYOUT (Layout) After stamp items have been selected, you can check the print layout, change the print position, and delete stamp items. Special Modes Special Modes Stamp Date Page Text Numbering Watermark The [Layout] key can only be touched when stamp items have been selected. Stamp Layout AAA AAA...
Page 262 Stamp Move Select the location to move the selected item. If you wish to swap the position of the selected stamp item with the position of another stamp item, temporarily move either one of the items to an unoccupied position and then switch the print positions. Stamp Move Select the location to move the selected item.
Page 263: Adding A Watermark To Acopy (Watermark)
ADDING A WATERMARK TO A COPY (Watermark) When making a copy, specific text can be added to the copy as a watermark. The density, angle, and pages (first page only or all pages) can be selected for a watermark. The watermark is printed at the centre of the paper. Printing "CONFIDENTIAL"...
Page 264 Stamp Watermark CONFIDENTIAL PRIORITY FOR YOUR INFO. DO NOT COPY URGENT DRAFT (+90 ~ -90) PRELIMINARY FINAL IMPORTANT COPY TOP SECRET PLEASE REPLY Stamp Watermark CONFIDENTIAL PRIORITY FOR YOUR INFO. DO NOT COPY URGENT DRAFT (+90 ~ -90) PRELIMINARY FINAL IMPORTANT COPY TOP SECRET...
Page 265: [Image Edit] Key
[Image Edit] KEY When the [Image Edit] key is touched in the 2nd special modes menu screen, the image edit menu screen opens. Image edit menu screen Special Modes Stamp Image Edit File Quick File Original Mixed Size Original Count [Photo Repeat] key ☞...
Page 266: Repeating Photos On A Copy (Photo Repeat)
REPEATING PHOTOS ON A COPY (Photo Repeat) Photo Repeat is used to create repeated images of a photo-size original (130 mm x 90 mm size, 100 mm x 150 mm size, 70 mm x 100 mm size, 65 mm x 70 mm size or 57 mm x 100 mm size (3" x 5" size, 5" x 7" size, 2-1/2" x 4" size, 2-1/2"...
Page 267 Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Image Edit] key. (4) Touch the [Photo Repeat] key. ☞ [Image Edit] KEY (page 2-105) Image Edit Photo Repeat Original Size Repeat Type A4/8½x11...
Page 268: Creating A Large Poster (Multi
CREATING A LARGE POSTER (Multi-Page Enlargement) This function is used to enlarge an image of an original and print it as a composite image using multiple sheets of paper. Original (A4 (8-1/2" x 11") size) Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens.
Page 269 Ready to scan for copy. Copies will be delivered in 2 parts. Image Edit Border Print Multi-Page Enlargement Enlargement Size Original Size (A Size) A0x2 Enlargement size Original size A3, A4, A5 A3, A4, A5 A3, A4 A0 x 2* B4, B5 B4, B5 B4, B5...
Page 270 Image Edit Border Print Multi-Page Enlargement Enlargement Size Original Size (A Size) A0x2 Press the [START] key. Copying will begin. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.
Page 271: Reversing The Image (Mirror Image)
REVERSING THE IMAGE (Mirror Image) This feature is used to make a copy that is a mirror image of the original. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes.
Page 272: Copying In The Centre Of The Paper (Centring)
COPYING IN THE CENTRE OF THE PAPER (Centring) This is used to centre the copied image on the paper. This lets you place the image in the centre of the paper when the original size is smaller than the paper size or when the image is reduced.
Page 273 • The image can be reduced when using the centring function, but not enlarged. • When the original size or the paper size is displayed as a special size, this function cannot be used. To cancel centring... Touch the [Centring] key in the screen of step 3 so that it is not highlighted. 2-113 COPIER Contents...
Page 274: Reversing White And Black In Acopy (B/W Reverse)
REVERSING WHITE AND BLACK IN A COPY (B/W Reverse) This is used to reverse black and white in a copy to create a negative image. Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce toner consumption.
Page 275 COPIER When this function is selected, the "Original Image Type" setting for exposure adjustment automatically changes to "Text". To cancel B/W reverse... Touch the [B/W Reverse] key in the screen of step 3 so that it is not highlighted. 2-115 Contents...
Page 276: Adjusting The Sharpness Of An Image (Sharpness)
Touch the [Cancel] key in the screen of step 3. Soft Sharp Adjust the image. (1) Touch the [Soft] key or the [Sharp] key so that it is highlighted. Cancel (2) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode.
Page 277: Checking Copies Before Printing (Proof Copy)
CHECKING COPIES BEFORE PRINTING (Proof Copy) This feature prints only one set of copies, regardless of how many sets have been specified. After the first set is checked for errors, the remaining sets can be printed. Previously it was necessary to re-scan the original each time changes to settings were required.
Page 278 Plain 8½ 11 Up to 999 copies (sets) can be set. If an incorrect number of copies is set... Press the [CLEAR] key ( Press the [START] key. One set of copies is printed. If you are using the document glass to copy multiple originals, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.
Page 279 Proof Copy Paper Select 2-Sided Copy Special Modes • To change the number of sets printed, set the desired number of copies (sets) with the numeric keys. After changing the number of sets, touch the [End] key in the touch panel (not the [START] key) to print the sets. •...
Page 280: Checking The Number Of Scanned Original Sheets Before Copying (Original Count)
CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS BEFORE COPYING (Original Count) The number of scanned original sheets can be counted and displayed before copying is executed. By allowing you to check the number of original sheets that were scanned, this helps reduce the occurrence of copy mistakes. Indicator line Special Modes...
Page 281 130 pages of original have been scanned. Copy the scanned data? Cancel If the displayed number of original sheets is different from the actual number of original sheets... Press the [STOP] key ( To cancel the original count mode setting... Touch the [Original Count] key in the screen of step 2 so that it is not highlighted.
Page 282: Copying Originals Of Different Sizes (Mixed Size Original)
COPYING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original) Even when B4 (8-1/2" x 14") originals are mixed in with A3 (11" x 17") originals, all originals can be copied at once. When scanning the originals, the machine automatically detects the size of each original and uses paper appropriate for that size. When mixed size original is combined with auto ratio selection, the ratio is adjusted individually for each original according to the selected paper size, enabling output on a uniform paper size.
Page 283 A3 (11" x 17") A4 (8-1/2" x 11") Place with the sides that are the same length aligned on the left. Place the originals aligned to the far left corner. (8-1/2" x 14") A3 (11" x 17") Select the special modes. (1) Touch the [Special Modes] key.
Page 284 Press the [START] key. Copying will begin. To cancel scanning and copying... Press the [STOP] key ( • When [Different Width] is selected, the staple function cannot be used. • The mixed size original function cannot be used to copy originals that are the same size but are placed in different orientations (A4 and A4R (8-1/2"...
Page 285: Copying Thin Originals (Slow Scan Mode)
COPYING THIN ORIGINALS (Slow Scan Mode) Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent thin originals from misfeeding. Indicator line If the originals are inserted with too much force, they may crumple and misfeed. Special Modes Stamp Image Edit...
Page 286 COPIER The "2-Sided to 2-Sided" and "2-Sided to 1-Sided" modes of automatic 2-sided copying cannot be used. To cancel the slow scan mode setting... Touch the [Slow Scan Mode] key in the screen of step 2 so that it is not highlighted. System Settings (Administrator): Original Feeding Mode This is used to have scanning always take place in slow scan mode.
Page 287: Convenient Copy Functions
CONVENIENT COPY FUNCTIONS This section explains convenient copy functions such as interrupting a copy run, changing the order of reserved copy jobs, and storing copy settings in a program. INTERRUPTING A COPY RUN (Interrupt copy) When you need to make an urgent copy and the machine is busy with a long copy run or other job, use interrupt copy. Interrupt copy temporarily stops the job in progress and lets you perform the interrupt copy job first.
Page 288 • If user authentication is enabled, the login screen will appear when the [Interrupt] key is pressed. Enter your user name and password to log in. The number of copies made will be added to the count of the user that logged in. •...
Page 289: Checking A Preview Image Of A Copy (Preview)
CHECKING A PREVIEW IMAGE OF A COPY (Preview) You can touch the [Preview] key so that it is highlighted in the base screen and then scan the original to check a preview image of the copy in the touch panel before printing the copy. Place the original.
Page 290 COPIER To cancel the operation... Press the [CLEAR ALL] key ( System Settings (Administrator): Default Preview You can set the default state of the [Preview] key to always selected (highlighted). Enable this setting if you wish to check a preview image each time you make a copy. 2-130 Contents...
Page 291: Preview Screen
PREVIEW SCREEN The preview screen is explained below. Preview Preview image A preview image of the scanned original is displayed. If the image is cut off, use the scroll bars at the right and bottom of the screen to scroll the image. Touch a bar and slide it to scroll.
Page 292: Job Status Screen
JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status screen shows the status of jobs by mode. When the [JOB STATUS] key is pressed, the job status screen of the mode that was being used before the key was pressed appears.
Page 293: Job Queue Screen And Completed Job Screen
JOB QUEUE SCREEN AND COMPLETED JOB SCREEN The job status screen consists of the job queue screen that shows copy and print jobs waiting to be printed and the job currently in progress, the completed job screen that shows jobs that have been completed, and the spool screen that shows print jobs that have been spooled and encrypted PDF jobs that are waiting for a password to be entered.
Page 294 Job key display Each job key shows the position of the job in the job queue and the current status of the job. Copy Indicates the number (position) of the job in the job queue. When the job currently being printed is finished, the job moves up one position in the job queue.
Page 295: Cancelling A Job That Is Waiting In The Queue
CANCELLING A JOB THAT IS WAITING IN THE QUEUE A copy job that is waiting to be printed can be cancelled. JOB STATUS Print Job Scan to Fax Job Job Queue Sets / Progress Computer01 020 / 001 002 / 000 Copy Computer02 002 / 000...
Page 296: Giving Priority To A Job In The Queue
GIVING PRIORITY TO A JOB IN THE QUEUE If a copy job is begun when there are already multiple jobs in the queue, the copy job will appear at the end of the queue. However, if you have an urgent copy job, you can give priority to the job and have it executed first. JOB STATUS Print Job Scan to...
Page 297: Checking Information On A Copy Job Waiting In The Queue
CHECKING INFORMATION ON A COPY JOB WAITING IN THE QUEUE Detailed information can be displayed on a copy job waiting in the queue. JOB STATUS Print Job Scan to Fax Job Job Queue Sets / Progress Status Copy 020 / 001 Copying Copy 002 / 000...
Page 298: Storing Copy Operations (Job Programs)
STORING COPY OPERATIONS (Job Programs) A job program is a group of copy settings stored together. When copy settings are stored in a job program, the settings can be retrieved and used for a copy job by means of a simple operation. For example, suppose A3 (11"...
Page 299: Storing (Editing/Deleting) A Job Program
STORING (EDITING/DELETING) A JOB PROGRAM The procedures for storing copy settings in a job program and deleting a job program are explained below. LOGOUT Job Programs Press program number. Recall Job Programs Press program number. Recall Editing or deleting a job program... When a highlighted numeric key is touched, the following screen appears.
Page 300 To store, make selections and press [OK], to delete, press [Cancel]. Exposure Auto Copy Ratio Original Paper Select 100% Auto The number of copies cannot be stored. Select the copy settings that you wish to Cancel store in the job program and touch the Special Modes [OK] key.
Page 301: Appendix
APPENDIX Examples of covers and inserts The relations between the originals and finished copies when covers or inserts are inserted are shown on the following pages. Covers • 1-sided copying of 1-sided originals • 1-sided copying of 2-sided originals Inserts •...
Page 302 Covers (1-sided copying of 1-sided originals) 1-sided copies are made of the following 1-sided originals. 1st page 2nd page 3rd page Cover copying condition Front cover Back cover No copying No copying 1-sided No copying copying 2-sided No copying copying 1-sided No copying copying...
Page 303 Covers (2-sided copying of 1-sided originals) 2-sided copies are made of the following 1-sided originals. 1st page 2nd page 3rd page Cover copying condition Front cover Back cover No copying No copying 1-sided No copying copying 2-sided No copying copying 1-sided No copying copying...
Page 304 Covers (1-sided copying of 2-sided originals) 1-sided copies are made of the following 2-sided originals. 1st page 2nd page 3rd page Cover copying condition Front cover Back cover No copying No copying 1-sided No copying copying 2-sided No copying copying 1-sided No copying copying...
Page 305 Covers (2-sided copying of 2-sided originals) 2-sided copies are made of the following 2-sided originals. 1st page 2nd page 3rd page Cover copying condition Front cover Back cover No copying No copying 1-sided No copying copying 2-sided No copying copying 1-sided No copying copying...
Page 306 Inserts (copying of 1-sided originals) 1-sided and 2-sided copying of the following 1-sided originals. The example of adding an insert at the 3rd sheet is shown. (when "Insertion Page" is set to "3" in the insertion settings of the insert settings in the special modes) 1st page 2nd page 3rd page...
Page 307 CHAPTER 3 PRINTER This chapter provides detailed explanations of the procedures for using the printer function. To use the printer function, the printer function must be available. PRINTER FUNCTION OF THE MACHINE ..3-3 PRINTING FROM WINDOWS BASIC PRINTING PROCEDURE .
Page 308 PRINT FUNCTIONS FOR SPECIAL PURPOSES ......3-44 • PRINTING SPECIFIED PAGES ON DIFFERENT PAPER (Different Paper).
Page 309: Printer Function Of The Machine
PRINTER FUNCTION OF THE MACHINE To use the machine's print function, the expansion kit must be installed in the machine in accordance with your environment. Printing will be possible from your computer after you have installed the printer driver. See the table below to determine which printer driver to use in your environment. Environment PCL6, PCL5e* The machine supports the Hewlett-Packard PCL6 and PCL5e printer...
Page 310: Printing From Windows
PRINTING FROM WINDOWS BASIC PRINTING PROCEDURE The following example explains how to print a document from "WordPad", which is a standard accessory program in Windows. The menu used to execute printing may vary depending on the software application. The button that is used to open the printer driver properties window (usually [Properties] or [Printing Preferences]) may vary depending on the software application.
Page 311 • Make sure the paper size is the same as the paper size set in the software application. • Up to eight custom paper sizes can be stored. Storing a custom paper size makes it easy to specify that size each time you need to use it.
Page 312: Selecting The Paper
SELECTING THE PAPER This section explains how to configure the "Paper Selection" setting on the [Paper] tab of the printer driver properties window. Before printing, check the paper sizes, paper types, and paper remaining in the machine's trays. To view the most recent tray information, click the [Tray Status] button. •...
Page 313: Printing When The User Authentication Function Is Enabled
PRINTING WHEN THE USER AUTHENTICATION FUNCTION IS ENABLED When the user authentication function is enabled in the machine's system settings (administrator), your user information (login name, password, etc.) must be entered in the printer driver properties window before you can print. The information that must be entered varies depending on the authentication method being used, so check with the administrator of the machine before printing.
Page 314: Start Printing
To have a confirmation window appear before printing starts, select the [Auto Job Control Review] checkbox so that a checkmark appears. • Even when user authentication is enabled in the system settings (administrator), normally printing is possible without entering user information. The number of pages printed is added to the "Other User" count. In this case, other print functions may be restricted.
Page 315 PRINTER System Settings (Administrator): Disabling of Printing by Invalid User This is used to prohibit printing of print jobs by users whose user information is not stored in the machine. When this function is enabled, printing is not allowed when user information is not entered or incorrect information is entered. Contents...
Page 316: Viewing Printer Driver Help
VIEWING PRINTER DRIVER HELP When selecting settings in the printer driver, you can display Help to view explanations of the settings. The button that is used to open the printer driver properties window (usually [Properties] or [Printing Preferences]) may vary depending on the software application. Pop-up help Help can be displayed for a setting by clicking the setting and pressing the [F1] key.
Page 317: Saving Frequently Used Print Settings
SAVING FREQUENTLY USED PRINT SETTINGS Settings configured on each of the tabs at the time of printing can be saved as user settings. Saving frequently used settings or complex settings under an assigned name makes it easy to select those settings the next time you need to use them.
Page 318 • Up to 30 sets of user settings can be saved. • The following items cannot be saved in user settings. - A watermark that you created - Paper insertion settings - Overlay file - [Tab Paper Print] settings on the [Special Modes] tab (PCL6 only) - The login name, password, user name, and job name entered in the [Job Handling] tab Check and save the settings.
Page 319: Using Saved Settings
USING SAVED SETTINGS The button that is used to open the printer driver properties window (usually [Properties] or [Printing Preferences]) may vary depending on the software application. Deleting saved settings Select the user settings that you want to delete in (1) of step 2 above, and click the [Delete] button. Open the printer driver properties window from the print window of the software application.
Page 320: Changing The Printer Driver Default Settings
CHANGING THE PRINTER DRIVER DEFAULT SETTINGS The default settings of the printer driver can be changed using the procedure below. The settings selected using this procedure are saved and become the default settings when printing from a software application. (Settings selected in the printer driver properties window when printing from an application remain in effect only while the application is in use.) Click the [Start] button (...
Page 321 "'" Pope< Jdvanced SpeaaI Mode. Kardng Watermarlu Se!!ngs Use.- Uruled Co ... ".., """""''''" @1-Sided 2·Sided(tlook) 2·Soded(TabIet) p~StyIe TtledP~ [jJil[Jll f'notnlI N·l.tI " lo~:::::t:::~:J~~ Configure the settings and click the [OK] button. Dol ... So.. For explanations of the settings, see printer driver Help. "'"...
Page 322: Printing From A Macintosh
PRINTING FROM A MACINTOSH BASIC PRINTING PROCEDURE The following example explains how to print a document from the standard accessory program "TextEdit" in Mac OS X ("SimpleText" in Mac OS 9). To use the machine as a printer for the Macintosh, the PS3 expansion kit must be installed in the machine and the machine must be connected to a network.
Page 323: Printing
PRINTING The menu used to execute printing may vary depending on the software application. The machine name that appears in the "Printer" menu is normally [SCxxxxxx]. ("xxxxxx" is a sequence of characters that varies depending on the machine model.) Select [Print] from the [File] menu of TextEdit.
Page 324 SCxnxxx Primer Presets Standard Copi & Pag .. at~d Copi Pages From Click the [Print] button. Printing begins. :1 - - - - 3-18 PRINTER Contents...
Page 325: Selecting The Paper
SELECTING THE PAPER This section explains the [Paper Feed] settings ("Paper Source" setting in [General] in Mac OS 9) in the print settings window. • When [Auto Select] is selected A tray with plain paper or recycled paper (the factory default setting is plain paper only) of the size specified in "Paper Size"...
Page 326: Printing When The User Authentication Function Is Enabled
PRINTING WHEN THE USER AUTHENTICATION FUNCTION IS ENABLED When the user authentication function is enabled in the machine's system settings (administrator), you must enter your user information (login name, password, etc.) in order to print. The information that must be entered varies depending on the authentication method being used, so check with the administrator of the machine before printing.
Page 327 In Mac OS X, you can click the simplify operation the next time you wish to print based on the same user authentication. Even when user authentication is enabled in the system settings (administrator), normally printing is possible without entering user information. The number of pages printed is added to the "Other User" count. In this case, other print functions may be restricted.
Page 328: Frequently Used Functions
FREQUENTLY USED FUNCTIONS This section explains frequently used functions. • SELECTING A PRINT MODE SETTING • TWO-SIDED PRINTING (page 3-24) • FITTING THE PRINT IMAGE TO THE PAPER 3-26) The explanations assume that the paper size and other basic settings have already been selected. For the basic procedure for printing and the steps for opening the printer driver properties window, see the following section: ☞...
Page 329 Macintosh ":, ~ s: ,JI~Ad ~ .: . " ; '; ------------_"' __________ Toner Save Offse MOdt'I: N·, · ,· ·"""""""""""""""·:~ Prin! Doc. (1) Select [Printer Features]. (2) Select [Advanced]. (2) (3) (3) Select the "Print Mode". ____ _ !~ I 3-23 PRINTER Contents...
Page 330: Two-Sided Printing
TWO-SIDED PRINTING The machine can print on both sides of the paper. This function is useful for many purposes, and is particularly convenient when you want to create a simple pamphlet. Two-sided printing also helps conserve paper. Paper orientation Windows 2-Sided(Book) Vertical Windows...
Page 331 Macintosh (1) Select [Layout]. (2) Select [Long-edged binding] or [Short-edged binding]. • In Mac OS X v10.2.8, select the settings in [Advanced]. • In Mac OS 9, select [Output/Document Style] and then select [Flip on long edge] or [Flip on short edge].
Page 332: Fitting The Print Image To The Paper
FITTING THE PRINT IMAGE TO THE PAPER This function is used to automatically enlarge or reduce the printed image to match the size of the paper loaded in the machine. This is convenient for such purposes as enlarging an A4 or letter document to A3 or ledger size to make it easier to view, and to print when the same size of paper as the document image is not loaded in the machine.
Page 333: Printing Multiple Pages On One Page
PRINTING MULTIPLE PAGES ON ONE PAGE This function can be used to reduce the print image and print multiple pages on a single sheet of paper. This is convenient when you want to print multiple images such as photos on a single sheet of paper, and when you want to conserve paper.
Page 334 Windows (2) (3) Macintosh (1) Configure the settings on the [Main] tab. (2) Select the number of pages per sheet. (3) If you wish to print borderlines, click the [Border] checkbox so that a checkmark appears. (4) Select the order of the pages. (1) Select [Layout].
Page 335: Stapling Output/Punching Holes In Output
STAPLING OUTPUT/PUNCHING HOLES IN OUTPUT Staple function The staple function can be used to staple output. This function saves considerable time when preparing handouts for a meeting or other stapled materials. The staple function can also be used in combination with two-sided printing to create materials with a more sophisticated appearance. Stapling positions and the number of staples can be selected to obtain the following stapling results.
Page 336 Windows Macintosh (1) Configure the settings on the [Main] tab. (2) Select the "Binding Edge". (3) Select the staple function or the punch function. • For the staple function, select the number of staples in the "Staple" menu. • For the punch function, click the [Punch] checkbox so that a checkmark (1) Select [Printer Features].
Page 337: Convenient Printing Functions
CONVENIENT PRINTING FUNCTIONS This section explains convenient functions for specific printing objectives. • CONVENIENT FUNCTIONS FOR CREATING PAMPHLETS AND POSTERS • FUNCTIONS TO ADJUST THE SIZE AND ORIENTATION OF THE IMAGE (page 3-35) • IMAGE ADJUSTMENT FUNCTION The explanations assume that the paper size and other basic settings have already been selected. For the basic procedure for printing and the steps for opening the printer driver properties window, see the following section: ☞...
Page 338 Macintosh (1) Select [Printer Features]. (2) Select the "Binding Edge". [2 Staples] can be selected in the "Staple" menu when a saddle stitch finisher is installed. (3) Select [Tiled Pamphlet] or [2-Up Pamphlet]. • In Mac OS X v10.2.8, select from the "2-Side Printing"...
Page 339: Increasing The Margin (Margin Shift)
INCREASING THE MARGIN (Margin Shift) This function is used to shift the print image to increase the margin at the left, right, or top of the paper. This is convenient when you wish to staple or punch the output but the binding area overlaps the text. When a finisher or saddle stitch finisher is installed, the staple function or the punch function can be used with this function.
Page 340: Creating A Large Poster (Poster Printing)
CREATING A LARGE POSTER (Poster Printing) (This function is only available in Windows.) One page of print data can be enlarged and printed using multiple sheets of paper (4 sheets (2 x 2), 9 sheets (3 x 3) or 16 sheets (4 x 4)). The sheets can then be attached together to create a large poster.
Page 341: Functions To Adjust The Size And Orientation Of The Image
FUNCTIONS TO ADJUST THE SIZE AND ORIENTATION OF THE IMAGE ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees) This feature rotates the image 180 degrees so that it can be printed correctly on paper that can only be loaded in one orientation (such as paper with punch holes).
Page 342: Enlarging/Reducing The Print Image (Zoom/Xy-Zoom)
ENLARGING/REDUCING THE PRINT IMAGE (Zoom/XY-Zoom) This function is used to enlarge or reduce the image to a selected percentage. This allows you to enlarge a small image or add margins to the paper by slightly reducing an image. When using the PS printer driver (Windows), you can set the width and length percentages separately to change the proportions of the image.
Page 343: Adjusting Line Widths When Printing (Line Width Settings)
ADJUSTING LINE WIDTHS WHEN PRINTING (Line Width Settings) (This function is only available in Windows.) When lines in special applications such as CAD cannot be printed correctly, this setting can be used to adjust line widths, such as making overall line widths wider. (This setting is only effective for vector data;...
Page 344: Reversing The Image (Mirror Image)
REVERSING THE IMAGE (Mirror Image) The image can be reversed to create a mirror image. This function can be used to conveniently print a design for a woodblock print or other printing medium. Windows (This function can be used when the PS printer driver is used.) Macintosh (This function can only be used in Mac OS 9.) (1) Click the [Advanced] tab.
Page 345: Image Adjustment Function
IMAGE ADJUSTMENT FUNCTION ADJUSTING THE BRIGHTNESS AND CONTRAST OF THE IMAGE (Image Adjustment) (This function is only available in Windows.) The brightness and contrast can be adjusted in the print settings when printing a photo or other image. These settings can be used for simple corrections when you do not have image editing software installed on your computer.
Page 346: Printing Faint Text And Lines In Black (Text To Black/Vector To Black)
PRINTING FAINT TEXT AND LINES IN BLACK (Text To Black/Vector To Black) (This function is only available in Windows.) When printing a colour image, colour text and lines that are faint can be printed in black. (Raster data such as bitmap images cannot be adjusted.) This allows you to bring out colour text and lines that are faint and difficult to see.
Page 347: Functions That Combine Text And Images
FUNCTIONS THAT COMBINE TEXT AND IMAGES ADDING A WATERMARK TO PRINTED PAGES (Watermark) Faint shadow-like text can be added to the background of the printed image as a watermark. The size, density, and angle of the watermark text can be adjusted. The text can be selected from a pre-stored list, or entered to create an original watermark.
Page 348: Printing An Image Over The Print Data (Image Stamp)
PRINTING AN IMAGE OVER THE PRINT DATA (Image Stamp) (This function is only available in Windows.) A bitmap or JPEG image stored on your computer can be printed over the print data. The size, position, and angle of the image can be adjusted. This feature can be used to "stamp"...
Page 349: Creating Overlays For Print Data (Overlays)
CREATING OVERLAYS FOR PRINT DATA (Overlays) (This function is only available in Windows.) The print data can be printed in a previously created overlay. By creating table rulings or a decorative frame in an application different from that of the text file and registering the data as an overlay file, an attractive print result can be easily obtained without the need for complex manipulations.
Page 350: Print Functions For Special Purposes
PRINT FUNCTIONS FOR SPECIAL PURPOSES PRINTING SPECIFIED PAGES ON DIFFERENT PAPER (Different Paper) • Using this function in a Windows environment The front and back cover and specified pages of a document can be printed on paper that is different from the other pages.
Page 351 Macintosh (This function can only be used in Mac OS 9, Mac OS X v10.4.11 and v10.5 to 10.5.8 and 10.6 to 10.6.1.) (1) Select [Printer Features]. (2) Select [Different Paper]. (3) Select cover insertion settings. Select the print setting, paper tray, and paper type for the cover page and last page.
Page 352: Adding Inserts When Printing On Transparency Film (Transparency Inserts)
ADDING INSERTS WHEN PRINTING ON TRANSPARENCY FILM (Transparency Inserts) When printing on transparency film, this function helps prevent the sheets of transparency film from sticking together by inserting a sheet of paper between each sheet of film. It is also possible to print the same content on each inserted sheet of paper as is printed on the corresponding sheet of transparency film.
Page 353: Printing A Carbon Copy (Carbon Copy)
PRINTING A CARBON COPY (Carbon Copy) (This function is only available in Windows.) This function is used to print an additional copy of the print image on paper that is the same size but from a different paper tray. For example, if carbon copy print is selected when standard paper is loaded in tray 1 and coloured paper is loaded in tray 2, a print result similar to a carbon copy slip can be obtained with a single selection of the print...
Page 354: Printing Text On Tabs Of Tab Paper (Tab Paper Print/Tab Paper Settings)
PRINTER PRINTING TEXT ON TABS OF TAB PAPER (Tab Paper Print/Tab Paper Settings) (This function is only available in Windows.) This function is used to print text on the tabs of tab paper. Tab Paper Print (PCL6 only) You can print on each sheet of tab paper that you insert in the desired page position.
Page 355 Windows Tab Paper Print (PCL6 only) Open the data that you wish to print on the tab paper and then select the settings. (1) Click the [Special Modes] tab. (2) Select [Tab Paper Print] and click the [Settings] button. (3) Select the tab position settings. For commercially available tab paper, you can use the existing settings in "User Settings"...
Page 356 Tab Paper Settings When you have finished preparing the data to be printed on the tabs in the software application, select the following settings: (1) Click the [Advanced] tab. (2) Click the [Tab Paper Settings] button. (3) Select the tab paper settings. To shift the image, directly enter a number or click the button.
Page 357: Two-Sided Printing With Specific Pages Printed On The Front Side (Chapter Inserts)
TWO-SIDED PRINTING WITH SPECIFIC PAGES PRINTED ON THE FRONT SIDE (Chapter Inserts) (This function is only available in Windows.) You can have specific pages printed on the front side of the paper. When a page (such as the first page of a chapter) is specified as a front side page, the page will be printed on the front side of the paper even if would normally be printed on the reverse side (the reverse side will be left...
Page 358: Folding Printed Paper In Half (Fold)
FOLDING PRINTED PAPER IN HALF (Fold) When a saddle stitch finisher is installed, the fold function can be used to fold printed output in half. You can select whether the paper is folded with the printed side on the inside or the outside. When printing data that is in a pamphlet layout, the "Mult-Sheet Fold - Staple"...
Page 359: Convenient Printer Functions
CONVENIENT PRINTER FUNCTIONS USING TWO MACHINES TO PRINT A LARGE PRINT JOB (Tandem Print) Two machines are required to use this function. Tandem Print allows you to divide a large print job between two machines connected to your network. The machines simultaneously print each half of the job, making it possible to shorten the printing time when printing a large number of sets.
Page 360: Saving And Using Print Files (Retention/Document Filing)
PRINTER SAVING AND USING PRINT FILES (Retention/Document Filing) This function is used to store a print job as a file on the machine's hard drive, allowing the job to be printed from the operation panel when needed. The location for storing a file can be selected to prevent the file from being mixed together with files of other users.
Page 361 Windows (1) Click the [Job Handling] tab. (2) Select the retention setting. Click the [Retention] checkbox method in "Retention Settings". To enter a password (5 to 8 digit number), click the [Password] checkbox (3) Select document filing settings. Select the folder for storing the file in "Document Filing Settings".
Page 362: Automatically Print All Stored Data
Macintosh Automatically print all stored data When user authentication is enabled in the system settings (administrator), all retained (stored) print jobs of a user who logs in can be printed automatically after log in. After all jobs are printed, the files are deleted. To use the print all function, the following steps are necessary: •...
Page 363: Printing Without The Printer Driver
PRINTING WITHOUT THE PRINTER DRIVER When you do not have the printer driver installed on your computer, or when the software application used to open a file that you wish to print is not available, you can print directly to the machine without using the printer driver. The file types (and corresponding extensions) that can be printed directly are shown below.
Page 364: Directly Printing A File On An Ftp Server
DIRECTLY PRINTING A FILE ON AN FTP SERVER When an FTP server is configured in the machine's Web pages, you can specify and print a file on the FTP server from the operation panel of the machine. This saves you the trouble of downloading the file and printing it from a computer. For the procedure for accessing the Web pages, see the Start Guide.
Page 365: Directly Printing A File In Usb Memory
Print File-01.tiff Paper Select Number of Prints Auto (1 999) Output 2-Sided Quick File When you select a PDF file that has a password, you must enter the password in the job status screen to begin printing. ☞ PRINTING AN ENCRYPTED PDF FILE DIRECTLY PRINTING A FILE IN USB MEMORY A file in a USB memory device connected to the machine can be printed from the operation panel of the machine without using the printer driver.
Page 366: Print The Selected File
DOCUMENT COPY IMAGE SEND FILING File Retrieve Scan to HDD HDD Status External Data Access USB Memory Network Folder System Settings(Administrator) : Disabling of USB Memory Direct Print This setting is used to disable printing of files in a USB memory. When this setting is enabled, [USB Memory] key cannot be touched.
Page 367: Directly Printing A File In Anetwork Folder
When you select a PDF file that has a password, you must enter the password in the job status screen to begin printing. ☞ PRINTING AN ENCRYPTED PDF FILE DIRECTLY PRINTING A FILE IN A NETWORK FOLDER You can use the machine's operation panel to select and print a file on a server or in a shared folder of an individual's computer on the same network as the machine.
Page 368 Select workgroup. Workgroup Workgroup Name Work 1 Work 2 Work 3 Work 4 Work 5 Work 6 Select server. Server Work 1 Server Name Server 1 Server 2 Server 3 Server 4 Server 5 Server 6 Select network folder. Network Folder \\Server 1 Network Folder Name User 1...
Page 369 \\Server 1\User 1 File or Folder Name File-01.tiff Folder01 File-02.tiff File-03.tiff Folder02 File-04.tiff File-05.tiff • A total of 100 keys of files and folders can be displayed. • Touch the key to move up one folder level. • To return to the network folder selection screen, touch the •...
Page 370: Directly Printing From A Computer
DIRECTLY PRINTING FROM A COMPUTER Settings can be configured in the Web pages of the machine to enable direct printing from a computer without using the printer driver. For the procedure for accessing the Web pages, see the Start Guide. SUBMIT PRINT JOB You can specify a file to be printed directly without using the printer driver.
Page 371: E-Mail Print
E-MAIL PRINT An e-mail account can be configured in the machine to have the machine periodically check your mail server and automatically print received e-mail attachments without using the printer driver. • Configuring settings To use E-mail Print, you must first configure an e-mail account in the machine. To configure an account, click [Application Settings] and then [E-mail Print Settings] in the Web page menu.
Page 372: Checking The Print Status
CHECKING THE PRINT STATUS JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status screen shows the status of jobs by mode. When the [JOB STATUS] key is pressed, the job status screen of the mode that was being used before the key was pressed appears.
Page 373: Spool Screen/Job Queue Screen/Completed Job Screen
SPOOL SCREEN/JOB QUEUE SCREEN/COMPLETED JOB SCREEN The job status screen consists of the job queue screen that shows copy and print jobs waiting to be printed and the job currently in progress, the completed job screen that shows jobs that have been completed, and the spool screen that shows print jobs that have been spooled and encrypted PDF jobs that are waiting for a password to be entered.
Page 374 Job key display Each job key shows the position of the job in the job queue and the current status of the job. Computer01 Indicates the number (position) of the job in the job queue. When the job currently being printed is finished, the job moves up one position in the job queue.
Page 375: Printing An Encrypted Pdf File
PRINTING AN ENCRYPTED PDF FILE Encrypted PDF is used to protect a PDF file by requiring the entry of a password to print or edit the file. To directly print an encrypted PDF file on an FTP server or in a USB memory device, etc. connected to the machine, follow the steps below to enter the password and begin printing.
Page 376: Giving A Print Job Priority/Cancelling A Print Job
GIVING A PRINT JOB PRIORITY/CANCELLING A PRINT JOB GIVING A PRINT JOB PRIORITY When the machine is busy copying or printing a received fax or other job, you can give priority to a print job that is waiting to be printed and print it ahead of the other jobs. JOB STATUS Print Job Scan to...
Page 377: Cancelling A Print Job
CANCELLING A PRINT JOB A job being printed, a job waiting to be printed, or a spooled job can be cancelled. JOB STATUS Print Job Scan to Fax Job Job Queue Sets / Progress Computer01 020 / 001 Computer02 020 / 000 0312345678 002 / 000 Copy...
Page 378: Changing To Another Paper Size And Printing When Paper Runs Out
CHANGING TO ANOTHER PAPER SIZE AND PRINTING WHEN PAPER RUNS OUT If printing stops because the machine ran out of paper, or if the size of paper specified in the printer driver is not loaded in the machine, a message will appear in the touch panel. Printing will begin automatically when the [OK] key is touched and paper is loaded in the machine.
Page 379: Appendix
APPENDIX PRINTER DRIVER SPECIFICATION LIST Available functions and output results may vary depending on the type of printer driver being used. Function Frequently used Copies functions Orientation N-Up Number of pages Order Border 2-Sided Print Fit To Page Binding Edge Staple* Punch* Paper...
Page 380 Function Special Different Paper functions Transparency Inserts Carbon Copy Tab Printing Chapter Inserts Page Interleave Fold* Tandem Print Retention Document Filing Image adjusting Image Adjustment function Text To Black/ Vector To Black Functions to Watermark combine text Image Stamp and images Overlay Image Quality Print Mode...
Page 381: Printer Specifications
PRINTER SPECIFICATIONS Type Built-in MX-M623U/MX-M623N: 62 pages/min, MX-M753U/MX-M753N: 75 pages/min (When printing Continuous printing speed same document continuously on A4 (8-1/2"x11") plain paper in non-offset mode, excluding processing time.) Printing resolution 600x600 dpi / 1200x1200 dpi Printer driver type PCL5e, PCL6, PostScript 3 compatible*1, XPS*...
Page 382 CHAPTER 4 FACSIMILE This chapter provides detailed explanations of the procedures for using the fax function. To use the fax function, the fax function must be available. BEFORE USING THE MACHINE AS A FAX PREPARATIONS FOR FAX ....4-4 •...
Page 383 FAX RECEPTION RECEIVING FAXES ......4-60 • RECEIVING A FAX ..... 4-61 •...
Page 384 USING AN EXTENSION PHONE CONNECTING AND USING AN EXISTING PHONE (Extension Phone Connection) ..4-125 • RECEIVING A FAX AFTER ANSWERING A CALL ON THE EXTENSION PHONE (Remote Reception) ....4-126 •...
Page 385: Before Using The Machine As Afax
BEFORE USING THE MACHINE AS A This section provides information that you should know before using the machine as a fax machine. PREPARATIONS FOR FAX To use the machine as a fax, the telephone line must be connected and the type of line set. CONNECTION TO THE TELEPHONE LINE Be sure to use the provided telephone line cord to connect the machine to the wall telephone socket.
Page 386: Setting The Telephone Line Type
SETTING THE TELEPHONE LINE TYPE The machine's dial mode setting must be set to the type of telephone line you are using. If the setting is not correct, dialling will not be possible. Touch the [Auto Select] key in "Dial Mode Setting" in the system settings (administrator). The machine will automatically set the dial mode to the type of line you are using.
Page 387: Checking The Date And Time
CHECKING THE DATE AND TIME Verify that the correct date and time are set in the machine. The date and time are set in the system settings of the machine. When the [SYSTEM SETTINGS] key is pressed, the system settings menu screen appears on the touch panel. Select [Default Settings], [Clock], and [Clock Adjust], and set the year, month, day, hour, and minute.
Page 388: Base Screen Of Fax Mode
BASE SCREEN OF FAX MODE To use the fax function, select settings and operations in the base screen of fax mode. To display the base screen of fax mode, touch the [IMAGE SEND] key and then touch the [Fax] tab. Each of the other modes that can be displayed by touching the [IMAGE SEND] key (scan, Internet fax, USB memory, PC scan and data entry modes) also have base screens.
Page 389 BASE SCREEN OF FAX MODE This screen is used to select settings and operations in fax mode. Mode select keys Use these keys to switch between copy, image send, and document filing modes. To switch to fax mode, touch the [IMAGE SEND] key. This shows various messages and the destinations that have been entered.
Page 390 (15) When "Hold Setting for Received Data Print" or "Received Data Image Check Setting" is enabled in the system settings (administrator), this will appear when a fax is received. : Only "Hold Setting for Received Data Print" is enabled : Only "Received Data Image Check Setting" is enabled : Both settings are enabled ☞...
Page 391: [R] Key
[R] key When the machine is connected to a PBX, the "PBX Setting" can be enabled to automatically connect to the outside line each time you dial normally. When the PBX setting is enabled, the [R] key appears in the base screen. To dial a number inside your PBX, touch the [R] key before dialling to temporarily cancel the "PBX Setting".
Page 392 ADDRESS BOOK SCREEN This screen is used to select a destination from the list of stored destinations. This shows the destination that has been selected. Number of displayed items selector key Touch to change the number of destinations (one-touch keys) displayed in the address book screen. Select 5, 10, or 15 destinations.
Page 393: Changing The Display Of One-Touch Keys In The Address Book Screen
When using the network scanner function or the Internet fax function, a different icon will appear in the one-touch key display if a non-fax destination (address) is stored. ☞ RETRIEVING A FAX NUMBER FROM THE ADDRESS BOOK • System Settings: Address Book This is used to store fax numbers in one-touch keys.
Page 394 Index display Indexes make it easy to search for a destination (one-touch key). The destinations are displayed separately using alphabetical search characters and index numbers. To display a stored destination, touch the appropriate index tab. It is convenient to store frequently used destinations in the [Freq.] index. Specify that a destination be displayed in the [Freq.] index when you store the destination.
Page 395: Fax Transmission Sequence
FAX TRANSMISSION SEQUENCE This section explains the basic procedure for sending a fax. Ready to send. Scan Internet Fax Address Book Scan: Original Auto Direct TX Exposure Auto Sub Address Standard Resolution Address Review Special Modes File Quick File Auto Reception Preview Fax Memory:100% Place the original.
Page 396 Scan Internet Fax USB Mem. Scan Address Book Original Scan: Auto Send: Direct TX Exposure Auto Sub Address Resolution Standard Address Review Special Modes File Quick File Auto Reception Preview Fax Memory:100% Scan Internet Fax USB Mem. Scan Address Book Original Scan: Auto...
Page 397: Begin Transmission
Scan the original and send the fax. If the original is placed on the document glass, follow these steps to start scanning and transmission: When sending a fax normally (memory transmission) (1) Press the [START] key. (2) When scanning is finished, replace the original with the next original. (3) Press the [START] key.
Page 398: Entering Destinations
ENTERING DESTINATIONS This section explains how to enter destination fax numbers. Destination fax numbers can be entered using the numeric keys, or by retrieving a previously stored fax number using the address book or a search number. ENTERING A FAX NUMBER WITH THE NUMERIC KEYS Take care to enter the correct number.
Page 399: Retrieving A Fax Number From The Address Book
RETRIEVING A FAX NUMBER FROM THE ADDRESS BOOK The address book screen shows stored destinations as one-touch keys. A destination fax number is retrieved by simply touching the one-touch key of that destination. This is called "one-touch dialling". It is also possible to store multiple fax numbers in a one-touch key, allowing you to retrieve all the numbers by simply touching the key.
Page 400: Retrieving A Stored Destination
RETRIEVING A STORED DESTINATION A destination fax number is retrieved by simply touching the one-touch key of that destination. Scan Internet Fax Address Book Original Scan: Direct TX Exposure Auto Sub Address Resolution Standard Address Review Special Modes File Quick File Auto Reception Preview Fax Memory:100%...
Page 401: Checking And Deleting Entered Destinations
CHECKING AND DELETING ENTERED DESTINATIONS When multiple destinations have been entered, you can display and check the destinations. You can also delete a destination (cancel selection of the destination). Condition Settings AAA AAA Address Review CCC CCC Address Entry EEE EEE Global GGG GGG Address Search...
Page 402: Using A Search Number To Retrievea Destination
USING A SEARCH NUMBER TO RETRIEVE A DESTINATION A destination stored in the address book can be retrieved using the of the modes or in the address book screen. Scan Internet Fax Address Book Original Scan: Direct TX Exposure Auto Sub Address Resolution Standard...
Page 403: Retrieving A Destination From Aglobal Address Book
RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK If an LDAP server is stored in the Web pages, you can look up a destination fax number in a global address book. Condition Settings AAA AAA Address Review CCC CCC Address Entry EEE EEE Global GGG GGG...
Page 404 Condition Settings Address Review XXX AAA Search Again XXX BBB XXX CCC XXX DDD Address Book XXX EEE XXX FFF • If 30 or more matches are found, a message will appear in the screen. Touch the [OK] key to close the message. A maximum of 300 search results are displayed.
Page 405: Using The Resend Function
USING THE RESEND FUNCTION The destinations of the most recent 8 transmissions by fax, Scan to E-mail, and/or Internet fax are stored. One of these can be selected to resend to that destination. Ready to send. Scan Internet Fax Address Book Original Scan: Direct TX...
Page 406: Chain Dialling
CHAIN DIALLING Number sequences entered with the numeric keys and/or one-touch keys can be linked together with pauses and dialled as a single number. Use chain dialling to dial a long number (such as an international number) when the country code and/or area code are stored separately in one-touch keys.
Page 407: Basic Transmission Methods
BASIC TRANSMISSION METHODS This section explains the basic procedures for sending a fax. TRANSMISSION METHODS The methods that can be used to send a fax from the machine are explained below. Select the method that best suits your needs. When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added.
Page 408 • If memory becomes full while the first original page is being scanned, transmission will stop. • In the following situations, the transmission will be automatically reserved (memory transmission) - When the line is busy or a communication error occurs and automatic resending is enabled. ☞...
Page 409 To fax thick originals or pages of a book, use the document glass. ☞ USING THE DOCUMENT GLASS FOR TRANSMISSION When the document glass is being used for a transmission, Quick Online transmission will not operate. If you wish to send a fax ahead of other previously reserved fax transmissions, use direct transmission mode.
Page 410: Placement Orientation Of The Original
PLACEMENT ORIENTATION OF THE ORIGINAL When an 8-1/2" x 11" (A4) original is placed in vertical orientation ( and transmitted in horizontal orientation ( is transmitted in that orientation ( 8-1/2" x 11"(A4) 8-1/2" x 11"R and 5-1/2" x 8-1/2" (A4R, B5 and A5) size originals are not rotated for transmission. System Settings (Administrator): Rotation Sending Setting The factory default setting is rotate before transmission.
Page 411: Transmittable Original Sizes
TRANSMITTABLE ORIGINAL SIZES The following original sizes can be transmitted. Using the automatic document feeder Using the document glass *A long original can be transmitted. THE SIZE OF THE PLACED ORIGINAL When a standard size original is placed, the original size is automatically detected and displayed in "Scan" in the base screen.
Page 412: When The Line Is Busy
WHEN THE LINE IS BUSY If the line is busy when you send a fax, transmission will be re-attempted automatically after a preset interval. This function only operates in memory transmission mode. In direct transmission mode or manual transmission mode, the transmission will be cancelled.
Page 413: Fax Destination Confirmation Mode
FAX DESTINATION CONFIRMATION MODE The fax destination confirmation mode displays a destination confirmation message when a fax transmission is performed to prevent accidental transmission to the wrong destination. This function is enabled in the system settings (administrator). When the function is enabled, a message will appear to confirm the destination when the [START] key is pressed to begin fax transmission.
Page 414: Using The Automatic Document Feeder For Transmission
USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION This section explains how to use the automatic document feeder to send a fax. Indicator line When sending a multi-page fax, the automatic document feeder and the document glass cannot both be used to scan the original pages.
Page 415: Using The Automatic Document Feeder To Send A Fax In Direct Transmission Mode
USING THE AUTOMATIC DOCUMENT FEEDER TO SEND A FAX IN DIRECT TRANSMISSION MODE Indicator line Condition Settings AAA AAA Address Review CCC CCC Address Entry EEE EEE Global GGG GGG Address Search III III Sub Address Sort Address Freq. ABCD EFGH IJKL Auto Reception...
Page 416 • The following functions cannot be used with direct transmission: Program, Timer Transmission, 2in1, Card Shot, Job Build, Original Count, File, Quick File, Memory Box, 2-Sided Original Scanning, Global Address Search (When the [Direct TX] key is highlighted) • Resending will not take place when a direct transmission is not successful due to a communication error or other reason. •...
Page 417: Using The Document Glass For Transmission
USING THE DOCUMENT GLASS FOR TRANSMISSION To fax a thick original or other original that cannot be fed through the automatic document feeder, open the automatic document feeder and place the original on the document glass. Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size.
Page 418 Press the [START] key. Scanning begins. If you have another page to scan, change pages and then press the [START] key. Repeat until all originals have been scanned. If no action is taken for one minute, scanning automatically ends and the transmission is reserved. Place next original.
Page 419: Using The Document Glass To Send A Fax In Direct Transmission Mode
USING THE DOCUMENT GLASS TO SEND A FAX IN DIRECT TRANSMISSION MODE When sending a fax from the document glass in direct transmission mode, only one page can be transmitted. Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size.
Page 420 Scan Internet Fax Address Book Original Auto Scan: Direct TX Exposure Auto Sub Address Resolution Standard Address Review Special Modes File Quick File Auto Reception Preview Fax Memory:100% Press the [START] key. Transmission begins. To cancel transmission... While "Dialling. Press [ ] to cancel"...
Page 421: Transmission Using The Speaker
TRANSMISSION USING THE SPEAKER When the speaker is used to dial, the fax is sent after the number is dialled and the connection is established. If a person answers, you will be able to hear his or her voice, but you will not be able to speak. Telephone mode.
Page 422: Sending The Same Fax To Multiple Destinations (Broadcast Transmission)
SENDING THE SAME FAX TO MULTIPLE DESTINATIONS (Broadcast Transmission) This function is convenient when you need to send the same fax to multiple destinations, such as sending a report to branch offices in different regions. You can transmit to as many as 500 destinations in one broadcast operation. (Combined maximum of 200 file server, desktop, and shared folder destinations.) Originals It is convenient to store destinations to which you frequently send faxes by broadcast transmission in group keys.
Page 423 CCC CCC 0123456789 Condition Settings AAA AAA BBB BBB Address Review CCC CCC DDD DDD Address Entry EEE EEE FFF FFF Global GGG GGG HHH HHH Address Search III III JJJ JJJ Sub Address Sort Address Freq. ABCD EFGH IJKL Auto Reception Preview Fax Memory:100%...
Page 424 Address Review CCC CCC KKK KKK LLL LLL MMM MMM NNN NNN OOO OOO PPP PPP QQQ QQQ RRR RRR SSS SSS UUU UUU TTT TTT To cancel a specified destination... Touch the key of the destination that you wish to cancel. A message will appear to confirm the deletion. Touch the [Yes] key.
Page 425 Resending to unsuccessful broadcast transmission destinations The results of a completed broadcast transmission can be checked in the job status screen. If transmission to any of the destinations failed, resend the fax to those destinations. JOB STATUS Print Job Scan to Fax Job Address Set Time...
Page 426 Detail Broadcast0001 Address Start Time DDD DDD 10:01 04/01 10:10 04/01 EEE EEE File Failed • The procedure after the [Retry] key is touched varies depending on whether or not the document filing function was used. Not using document filing You will return to the base screen with the unsuccessful destinations entered.
Page 427: Sending A Fax Directly From Acomputer (Pc-Fax)
SENDING A FAX DIRECTLY FROM A COMPUTER (PC-Fax) A document in a computer can be transmitted via the machine as a fax. Faxes are sent using the PC-Fax function in the same way as documents are printed. Select the PC-Fax driver as the printer driver on your computer and then select the Print command in the software application.
Page 428: Image Settings
IMAGE SETTINGS Settings for scanning the original are selected in the base screen of each mode. The current state of each setting appears to the right of the key used to select the setting. Address Book Sub Address Address Review Quick File [Original] key Touch this key to set the scan size, send size, and...
Page 429: Automatically Scanning Both Sides Of An Original (2-Sided Original)
AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) The automatic document feeder will automatically scan both sides of the document. 2-sided original Touch the [Original] key. ☞ IMAGE SETTINGS (page 4-47) Fax/Original Scan Size 100% Send Size Auto A4 2-Sided 2-Sided Tablet...
Page 430: Specifying The Scan Size And Send Size (Enlarge/Reduce)
SPECIFYING THE SCAN SIZE AND SEND SIZE (Enlarge/Reduce) When the original is placed, its size is automatically detected and displayed in the base screen. The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size. In the above screen, the scan size (the placed original) is A4 (8-1/2"...
Page 431 Specifying the original scan size (Specify using a standard size.) If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original size manually. Place the original in the document feeder tray or on the document glass and follow the steps below. Touch the [Original] key.
Page 432 Fax/Original Scan Size 100% Send Size 2-Sided 2-Sided Tablet Booklet When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed. Touch the [OK] key. Auto Image Orientation 4-51 FACSIMILE Contents...
Page 433 Specifying the original scan size (by numerical values) When scanning a non-standard size original such as a postcard or card, follow these steps to specify the original size. The width can be from 25 mm to 432 mm (1" to 17"), and the height can be from 25 mm to 297 mm (1" to 11-5/8"). Touch the [Original] key.
Page 434 Fax/Original Scan Size Send Size X420 Y297 2-Sided 2-Sided Booklet Tablet • When the scan size is specified by numerical values, the send size cannot be specified. • When the automatic document feeder is used, an original longer that 432 mm (17") can be scanned (maximum width 1000 mm (39-3/8")).
Page 435 Specifying the send size of the original Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If a send size smaller than the scan size is selected, the image will be reduced. The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by numerical values.
Page 436 Fax/Original Scan Size 141% Send Size Auto A4 2-Sided 2-Sided Tablet Booklet The ratio used for reduction or enlargement of the original will appear between the "Scan Size" and the "Send Size". Specify the orientation in which the original is placed. (1) Touch the appropriate [Image Orientation] key.
Page 437: Changing The Exposure
CHANGING THE EXPOSURE The exposure can be changed to match the darkness of the original. Refer the following tables to select appropriate settings. Exposure settings Exposure Auto Manual Touch the [Exposure] key. The current exposure setting appears to the right of the [Exposure] key. ☞...
Page 438: Changing The Resolution
CHANGING THE RESOLUTION The resolution can be selected to match the characteristics of the original, such as text or photo, the size of the text, and the darkness of the image. Refer the following tables to select appropriate settings. Resolution settings Resolution Standard Select this setting when your original consists of normal-sized text (like the text in this manual).
Page 439: Checking The Image To Be Transmitted (Preview)
CHECKING THE IMAGE TO BE TRANSMITTED (Preview) If you touch the [Preview] key before scanning the original, you can check the scanned image in the touch panel before sending the image. * The factory default setting is disabled. Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch panel.
Page 440: Preview Check Screen
PREVIEW CHECK SCREEN This section explains the preview check screen. Preview Preview image A preview of the scanned original appears. If the image is cut off, use the scroll bars at the right and bottom of the screen to scroll the image. Touch a bar and slide it to scroll.
Page 441: Fax Reception
FAX RECEPTION This section explains the basic procedures for receiving faxes. RECEIVING FAXES When the reception mode is set to "Auto Reception", the machine will receive and print faxes automatically. The fax reception mode is displayed in the base screen. •...
Page 442: Receiving A Fax
RECEIVING A FAX When a fax is transmitted to the machine, the machine automatically receives and prints the fax. • System Settings (Administrator): Speaker Settings This is used to change the volume and tone of the reception beep. • System Settings (Administrator): Number of Calls in Auto Reception This is used to change the number of rings on which fax reception begins automatically.
Page 443: Receiving A Fax Manually
RECEIVING A FAX MANUALLY A fax can be received manually using the touch panel. While the machine rings, touch the [Speaker] key in the base screen and then touch the [Fax Manual Reception] key that appears. • When a call is answered by touching the [Speaker] key, you will be able to hear the other party, however, you will not be able to speak.
Page 444: Printing A Password-Protected Fax (Hold Setting For Received Data Print)
PRINTING A PASSWORD-PROTECTED FAX (Hold Setting For Received Data Print) "Hold Setting for Received Data Print" can be enabled in the system settings (administrator) to have faxes received to memory without being printed. To print the faxes, a password must be entered. When this function is used, a password entry screen appears in the touch panel when a fax is received.
Page 445: Checking The Image Before Printing
CHECKING THE IMAGE BEFORE PRINTING When "Received Data Image Check Setting" is enabled* in the system settings (administrator), you can check a received image in the touch panel before printing it out. When this function is enabled, follow the steps below to print a received image. * The factory default setting is disabled.
Page 446: Image Check Screen
IMAGE CHECK SCREEN This section explains the image check screen. Image Check 0123456789 Information display This shows information on the displayed image. Preview image An image of the selected received image appears. If the image is cut off, use the scroll bars at the right and bottom of the screen to scroll the image.
Page 447: Forwarding Received Faxes (Fax Data Forward)
FORWARDING RECEIVED FAXES (Fax Data Forward) When the machine cannot print because it is out of paper or out of toner, received faxes can be forwarded to another previously programmed fax machine. This function is convenient in an office or work area that has two or more telephone lines and another fax machine is connected to a different line than the machine.
Page 448: Forwarding Received Faxes To Anetwork Address (Inbound Routing Settings)
FORWARDING RECEIVED FAXES TO A NETWORK ADDRESS (Inbound Routing Settings) You can have received faxes automatically forwarded to an e-mail address, file server address, desktop address, or network folder address. This function can be used to forward received faxes to a specified address without printing them. The machine •...
Page 449 Users without administrator rights can be prohibited from storing, editing, and deleting forwarding tables in this screen, and from specifying which table is used. To do so, select the checkboxes below • Disable Registration of Forward Table • Disable Change/Delete of Forward Table • Disable Change of Forward Approval When inbound routing is enabled, you can also specify whether or not you wish the machine to print the forwarded faxes.
Page 450 • When selecting senders from the "Sender Number/Address Setting" list, you can use the [Shift] key or the [Ctrl] key on your keyboard to select multiple senders. • A maximum of 50 forwarding tables can be stored. • Images sent in TIFF format may not display correctly in some recipient environments. In this event, change the file format to PDF.
Page 451 To delete a forwarding table, click the checkbox next to the table name so that it is selected Specifying forwarding tables to be used. To use the inbound routing function, enable the forwarding tables that you wish to use from among the stored tables. (1) Click [Inbound Routing Settings] in the Web page menu.
Page 452: Special Modes
SPECIAL MODES This section explains special modes that can be used for fax transmission. SPECIAL MODES When the [Special Modes] key is touched in the base screen, the special modes menu screen appears. The special modes menu consists of two screens. Touch the touched in the special modes screen, the selected settings are entered and the base screen reappears.
Page 453 (14) [Transaction Report] key ☞ CHANGING THE PRINT SETTINGS FOR THE TRANSACTION REPORT (Transaction Report) (page 4-97) (15) [Own Name Select] key ☞ TEMPORARILY CHANGING THE SENDER INFORMATION (Own Name Select) Does not appear when the stamp unit is not installed. Special modes can generally be combined with other special modes, however, there are some combinations that are not possible.
Page 454: Storing Fax Operations (Program)
STORING FAX OPERATIONS (Program) A program is a group of transmission settings stored together. When transmission settings are stored in a program, the settings can be retrieved and used for a fax job by means of a simple operation. For example, suppose that the same A4 (8-1/2" x 11") size documents are distributed to branch offices in various regions once a month.
Page 455 Place the original. Place the original in the document feeder tray or on the document glass as appropriate for the functions stored in the program. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the [Program] key. ☞...
Page 456: Erasing Peripheral Shadows On The Image (Erase)
ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase) The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function erases the parts of the image where shadows tend to form. The function does not detect shadows and erase only the shadows.) Scanning a thick book Shadows appear here.
Page 457 Fax/Special Modes Erase Edge Centre Edge+Centre Erase Erase Erase Side Erase Press the [START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. •...
Page 458: Transmitting An Original As Two Separate Pages (Dual
TRANSMITTING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan) The left and right sides of an original can be transmitted as two separate pages. This function is useful when you wish to fax the left and right pages of a book or other bound document as separate pages. Example: Faxing the left and right pages of a book Book or bound document •...
Page 459 Fax/Special Modes Program Erase Timer 2in1 Mixed Size Build Original Original File Count Press the [START] key. Scanning begins. When scanning finishes, place the next original and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. A beep will sound to indicate that scanning is finished.
Page 460: Sending A Fax At A Specified Time (Timer)
SENDING A FAX AT A SPECIFIED TIME (Timer) When this function is used, transmission takes place automatically at a specified time. The timer transmission function makes it easy to perform reserved transmissions, broadcast transmissions and other transmissions at night or other times when phone rates are low. A timer setting can also be specified for polling reception to receive a fax when you are not present.
Page 461 Fax/Special Modes Timer Day of the Week When this screen is opened, the setting will show the current time. If the time is not correct, press the [CLEAR ALL] key ( ) to cancel the operation. Correct the time in the system settings and then perform the timer transmission procedure.
Page 462: Sending Two Pages As A Single Page
SENDING TWO PAGES AS A SINGLE PAGE (2in1) Two original pages can be reduced and sent as a single page. This function is convenient when you have a large number of original pages and wish to reduce the number of pages sent. Portrait-oriented originals Landscape-oriented originals Place the original.
Page 463 Fax/Special Modes Program Erase Timer 2in1 Mixed Size Build Original Original File Count Scan Internet Fax Address Book Scan: Auto Original Direct TX Exposure Auto Sub Address Resolution Standard Address Review Special Modes File Quick File Auto Reception Preview Fax Memory:100% Fax/Original Scan Size 100%...
Page 464 • Transmission is not possible at a size smaller than the original size. • This function cannot be used in direct transmission mode or when the speaker is used to dial. • The 2in1 function cannot be used when the original is other than A4 (8-1/2" x 11") or B5 or A5 (5-1/2" x 8-1/2") size. •...
Page 465: Sending Both Sides Of A Card As Asingle Page (Card Shot)
SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE (Card Shot) This function lets you send the front and reverse sides of a card as a single page, without the need to send each side separately. Originals Transmission Front Back When using card shot, the original must be scanned on the document glass.
Page 466 Fax/Special Modes Card Shot (25-210) (25-210) • You can also touch the • The send size is automatically selected based on the original size you entered. • After selecting Card Shot, you can touch the [Original] key in the base screen to change the original scan size or the send size.
Page 467 Place next original. (Pg.No.x) Press [Start]. When finished, press [Read-End]. Configure If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, resolution, scan size, and send size. • The ratio cannot be specified and "Rotation Sending Setting" cannot be selected. •...
Page 468: Sending A Large Number Of Pages (Job Build)
SENDING A LARGE NUMBER OF PAGES (Job Build) This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic document feeder, and transmit the pages in a single transmission. Use this function when there are more original pages than can be placed at once in the auto document feeder.
Page 469 Press the [START] key to scan the first set. To cancel scanning... Press the [STOP] key ( Insert the next set of originals and press the [START] key. Repeat this step until all originals have been scanned. To cancel scanning... Press the [STOP] key ( ).
Page 470: Transmitting Originals Of Different Sizes (Mixed Size Original)
TRANSMITTING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original) This feature lets you scan and transmit originals of different sizes at the same time; for example, B4 (8-1/2" x 14") size originals mixed together with A3 (11" x 17") size originals. When scanning the originals, the machine automatically detects the size of each original.
Page 471 Press the [START] key. Scanning begins. A beep will sound to indicate that scanning is finished. To cancel scanning... Press the [STOP] key ( • Once mixed size originals has been selected, an original scan size cannot be specified. • When the mixed size original setting is selected, rotation sending does not operate. To cancel the mixed size original setting...
Page 472: Faxing Thin Originals (Slow Scan Mode)
FAXING THIN ORIGINALS (Slow Scan Mode) Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent thin originals from misfeeding. If the originals are inserted with too much force, they may crumple and misfeed. Enter the destination fax number.
Page 473 Press the [START] key. Scanning begins. A beep will sound to indicate that scanning is finished. To cancel scanning... Press the [STOP] key ( When this function is selected, automatic 2-sided scanning is not possible. To cancel slow scan mode... Touch the [Slow Scan Mode] key in the screen of step 3 so that it is not highlighted.
Page 474: Checking The Number Of Scanned Original Sheets Before Transmission (Original Count)
CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS BEFORE TRANSMISSION (Original Count) The number of scanned original sheets can be counted and displayed before transmission. Checking the number of scanned original sheets before transmission helps prevent transmission mistakes. Indicator line Enter the destination fax number. ☞...
Page 475 XX pages of original have been scanned. Send the scanned data? Cancel If this step is not performed for one minute while the above confirmation screen appears, the scanned image and settings will be cleared and the base screen will reappear. Scanning will not be completed automatically and the image will not be reserved for transmission.
Page 476: Stamping Scanned Originals (Verif. Stamp)
STAMPING SCANNED ORIGINALS (Verif. Stamp) This function stamps each original that is scanned using the automatic document feeder, allowing you to verify that all originals were correctly scanned. Originals To use this function, the optional stamp unit must be installed. Enter the destination fax number.
Page 477 Press the [START] key. Scanning begins. A beep will sound to indicate that scanning is finished. To cancel scanning... Press the [STOP] key ( ) to cancel the operation. • When two-sided originals are used, the front of each original is stamped twice. •...
Page 478: Changing The Print Settings For The Transaction Report
CHANGING THE PRINT SETTINGS FOR THE TRANSACTION REPORT (Transaction Report) A transaction report is automatically printed out to alert you when a transmission fails or when a broadcast transmission is performed. The transaction report contains a description of the transmission (date, start time, name of other party, time required, number of pages, result, etc.).
Page 479 Press the [START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [START] key.
Page 480: Adding Your Sender Information To Faxes (Own Number Sending)
ADDING YOUR SENDER INFORMATION TO FAXES (Own number sending) Your sender information (date, time, sender name, sender fax number, number of pages) is automatically added to the top of each fax page you transmit. Example of the sender information printed 04/APR/2010/Sat 3:00 PM (1) Date, time: (2) Sender name:...
Page 481: Temporarily Changing The Sender Information (Own Name Select)
TEMPORARILY CHANGING THE SENDER INFORMATION (Own Name Select) You can select the sender information printed on a transmitted fax from a list of stored senders. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Own Name Select] key.
Page 482: Calling A Fax Machine And Initiating Reception (Polling)
CALLING A FAX MACHINE AND INITIATING RECEPTION (Polling) The Polling function allows the receiving machine to call the transmitting machine and initiate reception of a document in that machine. Because the receiving machine initiates reception of a document, this is called "Polling Reception". (3) The fax is received.
Page 483 Press the [START] key. Your machine will call the other machine and initiate reception of the fax. • Polling reception can be used in combination with the timer function to poll at any specified time, such as at night or when you are not present (Only one timer polling reception can be set.).
Page 484: Initiating Polling Reception Manually
INITIATING POLLING RECEPTION MANUALLY Use this procedure when you must start polling after listening to a recorded greeting, such as when using a fax information service. • Make sure that an original is not placed in the machine when using the polling reception function. •...
Page 485: Sending A Fax When Another Machine Polls Your Machine (Polling Memory)
SENDING A FAX WHEN ANOTHER MACHINE POLLS YOUR MACHINE (Polling Memory) Sending a document that has been scanned into memory when another machine polls your machine is called "Polling Memory". Prior to polling, the document that will be faxed to the other machine must be scanned into a polling memory box. This function can only be used when the other machine is Super G3 or G3 compatible and has a polling function.
Page 486: Scanning A Document Into Polling Memory
SCANNING A DOCUMENT INTO POLLING MEMORY Follow these steps to scan a document into the memory box for polling transmission (Public Box). Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes.
Page 487 Memory Box - Data Store Memory Box Auto Original Scan: List Auto Exposure Resolution Standard Special Modes Auto Reception Fax Memory:100% • A program, timer setting, transaction report, polling, verif. stamp and filing cannot be selected. • To return to the screen of step 4, touch the [Memory Box List] key. Press the [START] key.
Page 488: Checking The Document In The Public Box
CHECKING THE DOCUMENT IN THE PUBLIC BOX You can check the document stored in the machine's public box for memory polling. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Memory Box] key.
Page 489: Deleting A Document From The Public Box
DELETING A DOCUMENT FROM THE PUBLIC BOX Delete a document from the Public Box when it is no longer needed. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Memory Box] key. ☞...
Page 490: Performing F-Code Communication
PERFORMING F-CODE COMMUNICATION This section explains how to perform F-code communication operations. F-code communication is possible with machines of other manufacturers that also support F-code communication. F-CODE COMMUNICATION Exchange of confidential documents (confidential communication), retrieval (polling) and distribution (polling memory) of information, distribution of information to multiple destinations (relay broadcast transmission) are possible with other machines that support F-code communication.
Page 491: Creating Memory Boxes In The Machine For F-Code Communication
CREATING MEMORY BOXES IN THE MACHINE FOR F-CODE COMMUNICATION Before the F-code communication function can be used, special memory boxes must be created using "F-Code Memory Box" in the system settings. A box name and F-code (sub-address and passcode) are programmed in each box, and an F-code communication function is assigned to each box.
Page 492: Confidential Communication Using F-Codes
CONFIDENTIAL COMMUNICATION USING F-CODES By sending a fax to an F-code memory box (confidential) in the receiving machine (your machine or the other machine), the sender can direct the transmission specifically to the user of the box. This is convenient for sending sensitive documents that you do not wish people other than the recipient to see, or when the receiving machine is shared by multiple departments.
Page 493: F-Code Confidential Transmission
F-CODE CONFIDENTIAL TRANSMISSION Follow the steps below to send a confidential fax by adding an F-code to the fax number. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Condition Settings AAA AAA...
Page 494: Checking Faxes Received By F-Code Confidential Reception
CHECKING FAXES RECEIVED BY F-CODE CONFIDENTIAL RECEPTION When an F-code confidential fax is sent to your machine, the fax is received to the memory box specified by the F-code. To check received faxes, enter the print passcode. Select the special modes. (1) Touch the [Special Modes] key.
Page 495 Enter PIN via the 10-key. Take care to enter the correct print passcode. If you make a mistake, a message will appear and you will return to the entry screen. You can touch the [Cancel] key to return to step 4. Press [Image Check] to check data.
Page 496: Polling Reception Using F-Codes
POLLING RECEPTION USING F-CODES This function enables your machine to call another machine and initiate reception of a fax stored in an F-code memory box (polling memory) in the other machine. During the polling operation, your machine must correctly specify the F-code (sub-address and passcode) configured in the other machine or polling reception will not take place.
Page 497 Condition Settings AAA AAA BBB BBB Address Review CCC CCC DDD DDD Address Entry EEE EEE FFF FFF Global GGG GGG HHH HHH Address Search Sub Address III III JJJ JJJ Sort Address Freq. ABCD EFGH IJKL Auto Reception Preview Fax Memory:100% (3), (5) If a passcode has been omitted in the memory box of the other machine, (5) and (6) are not necessary.
Page 498: Polling Memory Transmission Using F-Codes
POLLING MEMORY TRANSMISSION USING F-CODES When your machine receives a transmission request from another machine, this function sends a fax stored in an F-code memory box (polling memory) in your machine to that machine. The other machine must correctly specify the F-code configured in your machine or transmission will not take place.
Page 499 Memory Box Polling Memory Data Store Data Check Delete Data Memory Box - Data Store Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8 Box 9 Box 10 Box 11 Box 12 Memory Box - Data Store Once Unlimited Memory Box - Data Store...
Page 500 Press the [START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [START] key.
Page 501: Checking The Document In The F-Code Memory Polling Box
CHECKING THE DOCUMENT IN THE F-CODE MEMORY POLLING BOX You can check the document stored in the F-code memory polling box. A document in a memory box cannot be printed while the document is being transmitted. Select the special modes. (1) Touch the [Special Modes] key.
Page 502: Deleting A Document Stored For F-Code Polling Transmission
DELETING A DOCUMENT STORED FOR F-CODE POLLING TRANSMISSION When a document in an F-code memory polling box is no longer needed, follow the steps below to delete it. A document in a memory box cannot be deleted while the document is being transmitted. Select the special modes.
Page 503: Relay Request Transmission Using F-Codes
RELAY REQUEST TRANSMISSION USING F-CODES This function is used to send a fax to an F-code relay broadcast memory box in another machine and have that machine relay the fax to multiple end receiving machines. When the end receiving machines are far from your machine, sending the fax to a relay machine that is close to the end receiving machines can help reduce phone charges.
Page 504 Condition Settings AAA AAA BBB BBB Address Review CCC CCC DDD DDD Address Entry EEE EEE FFF FFF Global GGG GGG HHH HHH Address Search Sub Address III III JJJ JJJ Sort Address Freq. ABCD EFGH IJKL Auto Reception Preview Fax Memory:100% (3), (5) If a passcode has been omitted in the memory box of the other machine, (5) and (6) are not necessary.
Page 505: Relay Broadcast Transmission Using F-Codes
RELAY BROADCAST TRANSMISSION USING F-CODES When your machine receives an F-code relay request transmission, the fax is received to an F-code relay broadcast memory box in your machine. Your machine then relays the fax to each of the end receiving machines programmed in the memory box.
Page 506: Using An Extension Phone
USING AN EXTENSION PHONE This section explains how to use an extension phone to make voice calls and receive a fax after talking with the other party. CONNECTING AND USING AN EXISTING PHONE (Extension Phone Connection) You can connect an existing extension phone to the machine. The phone can be used for voice calls and to start fax reception on the machine.
Page 507: Receiving A Fax After Answeringa Call On The Extension Phone (Remote Reception)
RECEIVING A FAX AFTER ANSWERING A CALL ON THE EXTENSION PHONE (Remote Reception) Follow the steps below if you need to start fax reception after answering a call and speaking on the extension phone. If you are on a pulse-dial (rotary) line, set the extension phone to issue tone signals. If the extension phone is still lifted when fax transmission ends, an alarm signal will sound and a message will appear in the touch panel.
Page 508: Checking The Status Of Fax Jobs
CHECKING THE STATUS OF FAX JOBS This section explains how to check the status of reserved transmission jobs and received faxes. JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status screen shows the status of jobs by mode.
Page 509: Job Queue Screen And Completed Job Screen
JOB QUEUE SCREEN AND COMPLETED JOB SCREEN The job status screen consists of two screens: the job queue screen, which shows reserved jobs and the job currently in progress, and the completed jobs screen. To switch between the two screens, touch the job status screen selector key ((2) below).
Page 510 Job key display The following information is shown in the job queue keys and completed job keys that appear in the job status screen. AAA AAA Indicates the number (position) of the job in the job queue. When the job currently being transmitted is finished, each job moves up one position in the job queue.
Page 511 • Completed job Message Status "Send OK" Transmission completed. "In Memory" Reception completed but the fax has not been printed. "Received" Printed received fax data. "Forward OK" The received fax has been forwarded. "Stopped" The job was stopped. "Delete" Deleted received data in the image check screen.
Page 512: Operation When A Job In The Job Queue Is Completed
OPERATION WHEN A JOB IN THE JOB QUEUE IS COMPLETED When a normal transmission job is completed, it moves to the completed jobs screen and "Send OK" appears in the status column. Received faxes, timer transmission jobs, retry jobs, and forwarding jobs are handled in the job status screen as explained below.
Page 513: Checking A Reserved Job Or The Job In Progress
CHECKING A RESERVED JOB OR THE JOB IN PROGRESS The detailed contents of a broadcast transmission or serial polling job can be displayed. Select (touch) the key of the job that you wish to check and touch the [Detail] key. The job details screen will appear (see below). The job name and progress (number of completed destinations / total destinations) appear at the top of the screen.
Page 514: Checking Completed Jobs
CHECKING COMPLETED JOBS You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on completed broadcast transmission jobs, received fax forwarding jobs, serial polling jobs, and jobs that used document filing. Touch the key of the desired job in the completed jobs screen and touch the [Detail] key. The job detail screen (see below) will appear.
Page 515: Cancelling A Fax In Progress Or Areserved Fax
CANCELLING A FAX IN PROGRESS OR A RESERVED FAX Follow the steps below to cancel a fax transmission that is in progress or a reserved fax job. JOB STATUS Print Job Scan to Fax Job Address Set Time Pages Broadcast 10:00 04/01 020/003 Connecting 0123456789 10:05...
Page 516: Giving Priority To A Reserved Fax
GIVING PRIORITY TO A RESERVED FAX When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If you need to give priority to a job and send it ahead of the other jobs, follow the steps below. JOB STATUS Print Job Scan to...
Page 517: Checking The Activity Log (Image Sending Activity Report)
CHECKING THE ACTIVITY LOG (Image Sending Activity Report) IMAGE SENDING ACTIVITY REPORT You can have the machine print a log of recent image sending activity (date, name of other party, time required, result, etc.). The Image Sending Activity Report contains useful information such as the types of errors that occurred. The most recent 200 transactions are included in the report.
Page 518: Information Appearing In The Result Column
INFORMATION APPEARING IN THE RESULT COLUMN Error types and other information are printed in the result column of transaction and activity reports. When a transaction report or activity report is printed, check the result of the transaction in the result column and take action as needed. Examples of messages that are printed in the result column Message The transaction was completed normally.
Page 519: Facsimile Specifications
FACSIMILE SPECIFICATIONS Model MX-FXX2 Applicable telephone line Public switched telephone network, PBX Scanning resolution 8 x 3.85 lines/mm (Standard), 8 x 7.7 lines/mm (Fine, Fine-Halftone), 8 x 15.4 lines/mm (Super (supports ITU-T standards) Fine, Super Fine - Halftone), 16 x 15.4 lines/mm (Ultra Fine, Ultra Fine - Halftone) Transmission speed 33.6 kbps down to 2.4 kbps Automatic fallback Compression method...
Page 520 CHAPTER 5 SCANNER/INTERNET FAX This chapter provides detailed explanations of the procedures for using the scanner function and the Internet fax function. To use the network scanner function, the network scanner function must be available. To use the Internet fax function, the internet fax function must be available. USB memory mode can be used without installing a peripheral device.
Page 521 SPECIAL MODES SPECIAL MODES ......5-71 STORING SCAN OPERATIONS (Programs) ..5-73 ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase) .
Page 522: Before Using The Machine As Anetwork Scanner
BEFORE USING THE MACHINE AS A NETWORK SCANNER This section provides information that you should know before using the machine as a network scanner. NETWORK SCANNER FUNCTION The network scanner function of the machine can be used to scan an original, create an image file, and send the file over a network to a computer, FTP server, or other destination.
Page 523 USB memory mode USB Memory Scan The scanned file is sent to and stored in a USB memory device connected to the machine. Internet fax mode To use the Internet fax function, the Internet fax expansion kit must be installed. Internet fax transmission The scanned file is sent as an Internet fax.
Page 524: Preparations For Use As A Network Scanner
PREPARATIONS FOR USE AS A NETWORK SCANNER MAKE SURE THE MAIN POWER SWITCH IS IN THE "ON" POSITION The main power is "on" when the main power indicator on the right side of the operation panel is lit. If the main power indicator is not lit, the main power is "off". Switch the main power switch to the "on" position and press the [POWER] key ( ) on the operation panel.
Page 525: Settings Required In The Web Pages
SETTINGS REQUIRED IN THE WEB PAGES To use scan mode and Internet fax mode, the basic network scanner settings, server settings such SMTP and DNS server settings, and sender addresses must be configured in the Web pages. • Server settings To configure server settings, click [Network Settings] and then [Services Settings] in the Web page menu.
Page 526: Storing A Destination For Scan To Desktop
STORING A DESTINATION FOR SCAN TO DESKTOP To store your computer in the machine as a destination for Scan to Desktop, Network Scanner Tool must be installed from the "Sharpdesk/Network Scanner Utilities" CD-ROM that accompanies the machine. To scan an image to your computer, Network Scanner Tool must be running on your computer.
Page 527: Before Sending To A Direct Smtp Address
BEFORE SENDING TO A DIRECT SMTP ADDRESS The machine supports Direct SMTP, which lets you directly send Internet faxes within your company without using a mail server. For the procedure for storing a Direct SMTP address in the address book, see ADDRESSES FOR EACH SCAN MODE IN THE ADDRESS included in the address book for Internet fax mode.
Page 528: Base Screen
BASE SCREEN Scan mode, USB memory mode, Internet fax mode, and PC scan mode are used by selecting operations and settings in the base screens of those modes. To display the base screen of a mode, touch the [IMAGE SEND] key in the touch panel and then touch the tab of the mode that you wish to use.
Page 529 Customized keys The keys that appear here can be changed to show settings or functions that you prefer. ☞ Customizing displayed keys (page 5-11) [Preview] key Touch to check the image that will be sent in the touch panel before transmission. ☞...
Page 530 Customizing displayed keys Special mode keys and other keys can be displayed in the base screen. Set these keys to functions that you frequently use to access the functions with a single touch. The customized keys are configured using "Customize Key Setting" in the Web pages.
Page 531: Address Book Screen
ADDRESS BOOK SCREEN This screen is used to select transmission destinations. This shows the selected destination. Number of displayed items selector key Touch this key to change the number of destinations (one-touch keys) displayed in the address book screen. Select 5, 10, or 15 keys. [Condition Settings] key Touch this key to select transmission settings.
Page 532: Changing The Display Of One-Touch Keys In The Address Book Screen
• Icons appear in the one-touch keys in the address book to indicate which mode is used for transmission. ☞ RETRIEVING A DESTINATION FROM THE ADDRESS BOOK • For information on storing addresses in the address book, see SCAN MODE IN THE ADDRESS •...
Page 533 Index display Indexes make it easy to search for a destination (one-touch key). The destinations are displayed separately using alphabetical search characters and index numbers. To display a stored destination, touch the appropriate index tab. It is convenient to store frequently used destinations in the [Freq.] index. Specify that a destination be displayed in the [Freq.] index when you store the destination.
Page 534: Scan Send Sequence
SCAN SEND SEQUENCE This section explains the basic procedure for scanning and transmission. Select settings in the order shown below to ensure smooth transmission. For the detailed procedures for selecting the settings, see the explanation of each setting in this chapter. Ready to send.
Page 535 Scan Internet Fax USB Mem. Scan Address Book Original Scan: Auto Address Entry Exposure Auto Text Send Settings Resolution 200X200dpi Address Review File Format File Colour Mode Mono2 Special Modes Quick File Preview Start scanning and transmission Start scanning and transmission. If the original is placed on the document glass, follow these steps to start scanning and transmission: (1) Press the [START] key.
Page 536: Original Sizes
ORIGINAL SIZES TRANSMITTABLE ORIGINAL SIZES The following original sizes can be transmitted Using the automatic document feeder Using the document glass * A long original can be transmitted. (When only scan destinations are selected for scan transmission or metadata transmission, scanning will take place in Mono2 at a resolution of 300X300dpi or less.
Page 537: Entering Destinations
ENTERING DESTINATIONS This section explains how to specify destination addresses, including selecting an address from the address book and retrieving an address by entering a search number. RETRIEVING A DESTINATION FROM THE ADDRESS BOOK The address book screen shows stored destinations as one-touch keys. The destinations are displayed in order by search number.
Page 538: Retrieving A Destination
RETRIEVING A DESTINATION A destination is retrieved by selecting its one-touch key. Scan Internet Fax Address Book Original Scan: Address Entry Exposure Auto Send Settings Resolution 200X200dpi Address Review File Format Colour Mode Mono2 File Special Modes Quick File Preview Condition Settings AAA AAA...
Page 539: Checking And Deleting The Selected Destinations
CHECKING AND DELETING THE SELECTED DESTINATIONS When multiple destinations have been selected, you can display and check the destinations. You can also delete a destination from the list (cancel selection of the destination). Condition Settings AAA AAA Address Review CCC CCC Address Entry EEE EEE Global...
Page 540: Using A Search Number To Retrievea Destination
USING A SEARCH NUMBER TO RETRIEVE A DESTINATION A destination stored in the address book can be retrieved using the of the modes or in the address book screen. Scan Internet Fax Address Book Original Scan: Address Entry Exposure Auto Send Settings Resolution 200X200dpi...
Page 541: Entering An Address Manually
ENTERING AN ADDRESS MANUALLY Scan to E-mail, Internet fax, Network Folder and data entry mode addresses can be manually entered. Condition Settings AAA AAA Address Review CCC CCC Address Entry EEE EEE Global GGG GGG Address Search III III Sort Address Freq.
Page 542: Specifying A Network Folder
SPECIFYING A NETWORK FOLDER A network folder on a server or computer connected to the same network as the machine can be directly specified. Select [Network Folder] in step 2 on the previous page and follow the steps below. Network Folder Folder Path User Name Password...
Page 543 Select workgroup. Workgroup Workgroup Name Work 1 Work 2 Work 3 Work 4 Work 5 Work 6 Select server. Server Work 1 Server Name Server 1 Server 2 Server 3 Server 4 Server 5 Server 6 Select network folder. Network Folder \\Server 1 Network Folder Name User 1...
Page 544: Retrieving A Destination From Aglobal Address Book
RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK When an LDAP server is configured in the Web pages, you can look up an address in a global address book and retrieve the address for Scan to E-mail or Internet fax transmission (excluding Direct SMTP addresses). Condition Settings AAA AAA...
Page 545 Condition Settings Address Review XXX AAA Search Again XXX BBB XXX CCC Address Book XXX DDD XXX EEE XXX FFF • If 30 or more matches are found, a message will appear in the screen. Touch the [OK] key to close the message. Up to 300 matches can appear.
Page 546: Using The Resend Function
USING THE RESEND FUNCTION The destinations of the most recent 8 transmissions by Scan to E-mail, Internet fax (including Direct SMTP addresses) and/or fax are stored. One of these can be selected to resend to that destination. Ready to send. Scan Internet Fax Address Book...
Page 547: Transmitting An Image
TRANSMITTING AN IMAGE SENDING AN IMAGE IN SCAN MODE This section explains the basic procedure for transmission in scan mode (Scan to E-mail, Scan to FTP, Scan to Desktop, and Scan to Network Folder). When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added.
Page 548: Specify The Destination
Condition Settings AAA AAA BBB BBB Address Review CCC CCC DDD DDD Address Entry EEE EEE FFF FFF Global GGG GGG HHH HHH Address Search III III JJJ JJJ Sort Address Freq. ABCD EFGH IJKL Auto Reception Preview Fax Memory:100% •...
Page 549 Scan/Original Scan Size 100% Send Size Auto 2-Sided 2-Sided Booklet Tablet The original orientation is initially set to necessary. Press the [START] key. Scanning begins. • If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one page, go to step 7.
Page 550 Place next original. (Pg.No.x) Press [Start]. When finished, press [Read-End]. Configure • If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the transmission is reserved. • The [Configure] key can be touched to change the exposure, resolution, scan size, and send size for each original page scanned.
Page 551: Changing The Subject, File Name, Reply-To, And Body Text
CHANGING THE SUBJECT, FILE NAME, REPLY-TO, AND BODY TEXT The subject, file name, reply-to, and body text can be changed when performing a scan transmission. Preset items can be selected or text can be directly entered. • When performing Scan to FTP, Scan to Desktop, or Scan to Network Folder, only the file name is used. •...
Page 552 Send Settings Subject Sub: Schedule coordination meeting File Name Reply-To Body Text Add 'Reply to' to Cc Send Settings Subject Sub: Schedule coordination meeting File Name Material for planning meeting Reply-To Body Text Add 'Reply to' to Cc If user authentication is being used, the information of the user that logged in will be applied, and thus "Reply-To" cannot be changed.
Page 553 Send Settings Subject Sub: Schedule coordination meeting File Name Material for planning meeting Reply-To AAA AAA Body Text Add 'Reply to' to Cc Body Entry Thank you for your continuous support. We have attached scanned data, which you have requested. Pre-Set Select Edit •...
Page 554: Sending An Image In Usb Memory Mode
SENDING AN IMAGE IN USB MEMORY MODE Follow the steps below to send a scanned image to a commercially available USB memory device that has been connected to the machine. This stores the file in the USB device. • Use a FAT32 USB memory with a capacity of no more than 32 GB. •...
Page 555 Scan Internet Fax Stored to Original Scan: Auto File Name Exposure Auto Resolution 200X200dpi File Format Colour Mode Mono2 Special Modes Preview • When scanning to USB memory, there is no need to specify the destination. • If a destination of another mode has been previously specified, a message will appear when you change to USB memory mode indicating that the destination setting will be cleared.
Page 556 Press the [START] key. Scanning begins. • If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one page, go to step 7. To scan more pages, go to the next step. •...
Page 557 Do not disconnect the USB memory while "Processing data." or "Sending data." appears in the touch panel. • When transmission to USB memory is completed, "Sending data has been completed." is displayed. After a brief interval the message is cleared and the base screen of image send mode reappears. (The base screen of image send mode is the screen that appears when the [IMAGE SEND] key is touched.) •...
Page 558: Specify The Folder In Which The File Will Be Stored
SPECIFY THE FOLDER IN WHICH THE FILE WILL BE STORED. When sending a file to USB memory, a folder can be specified in USB memory. A new folder can also be created in USB memory. If a folder is not specified, the file will be stored on the first level of the USB memory. Scan Internet Fax Stored to...
Page 559: Entering A File Name
ENTERING A FILE NAME The file name can be directly entered when performing a scan transmission. • If the file name is not entered, the settings in the Web page are used. • For the procedure for entering text, see Touch the [File Name] key.
Page 560: Sending A Fax In Internet Fax Mode
SENDING A FAX IN INTERNET FAX MODE The basic procedure for sending a fax in Internet fax mode is explained below. This procedure can also be used to perform direct transmission by Direct SMTP. When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added.
Page 561 Condition Settings AAA AAA BBB BBB Address Review CCC CCC DDD DDD Address Entry EEE EEE FFF FFF Global GGG GGG HHH HHH Address Search III III JJJ JJJ Sort Address Freq. ABCD EFGH IJKL Auto Reception Preview Fax Memory:100% •...
Page 562 Press the [START] key. Scanning begins. • If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one page, go to step 7. To scan more pages, go to the next step. •...
Page 563: Changing The Subject, File Name, And Body Text
CHANGING THE SUBJECT, FILE NAME, AND BODY TEXT The subject, file name, and body text can be changed when performing an Internet fax transmission. Preset items can be selected or text can be directly entered. • If the subject and file name are not changed, the settings in the Web page are used. •...
Page 564 Send Settings Subject Sub: Schedule coordination meeting File Name Body Text Send Settings Subject Sub: Schedule coordination meeting File Name Material for planning meeting Body Text Body Entry Thank you for your continuous support. We have attached scanned data, which you have requested. Pre-Set Select Edit •...
Page 565 Send Settings Subject Sub: Schedule coordination meeting File Name Material for planning meeting Body Text Thank you for your continuous support. We have attached sca When storing pre-set text for the subject and file name in the Web pages, up to 80 characters can be entered. System Settings (Administrator): The Number of File Name/Subject/Body Keys Displayed Setting The setting for the number of subject keys and file name keys displayed in one screen can be changed to 6, 12, or 18.
Page 566: Sending The Same Image To Multiple Destinations (Broadcast Transmission)
SENDING THE SAME IMAGE TO MULTIPLE DESTINATIONS (Broadcast Transmission) The same scanned image can be sent to multiple scan modes, Internet fax mode, and fax mode destinations in a single operation. Up to 500 destinations can be selected in one broadcast operation. (Combined maximum of 200 file server, desktop, and shared folder destinations.) Originals If you frequently use broadcasting to send images to the same group of destinations, it is convenient to store those...
Page 567 Condition Settings BBB BBB AAA AAA Address Review CCC CCC DDD DDD Address Entry EEE EEE FFF FFF Global GGG GGG HHH HHH Address Search III III JJJ JJJ Sort Address Freq. ABCD EFGH IJKL Auto Reception Preview Fax Memory:100% •...
Page 568 Press the [START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning of one page finishes, replace it with the next page and press the [START] key.
Page 569: Broadcast Transmissions That Include Internet Fax Destinations
BROADCAST TRANSMISSIONS THAT INCLUDE INTERNET FAX DESTINATIONS When a broadcast transmission includes both scan mode and Internet Fax mode destinations, the Internet Fax mode settings (original orientation and other various settings) are given priority. When performing this type of broadcast transmission, note the information below.
Page 570 Print Job Scan to Fax Job Address Start Time Pages Status Broadcast0001 10:00 04/01 010/003 NG000000 10:05 04/01 001/001 Send OK Broadcast0002 Broadcast0003 10:22 04/01 004/004 Send OK 10:30 04/01 010/010 Send OK DDD DDD "Broadcastxxxx" will appear as the address of the broadcast job key. The job control number that appeared in the touch panel when scanning ended appears in "xxxx".
Page 571: Sending An Internet Fax From Acomputer (Pc-I-Fax)
SENDING AN INTERNET FAX FROM A COMPUTER (PC-I-Fax) A file on a computer can be sent via the machine as an Internet fax (PC-I-Fax function). Internet faxes are sent using the PC-I-Fax function in the same way as documents are printed. Select the PC-Fax driver as the printer driver for your computer and then select the Print command in the software application.
Page 572: Image Settings
IMAGE SETTINGS Settings for scanning the original are selected in the base screen of each mode. The current state of each setting appears to the right of the key used to select the setting. Address Book Address Entry Send Settings Address Review [Original] key Touch this key to set the scan size, send size, and...
Page 573: Automatically Scanning Both Sides Of An Original (2-Sided Original)
AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) The automatic document feeder can be used to automatically scan both sides of an original. 2-sided original Select the mode and display the image settings screen. (1) Touch the tab of the mode that you wish to use. (2) Touch the [Original] key.
Page 574: Specifying The Original Scan Size And Send Size (Enlarge/Reduce)
SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce) When the original is placed, its size is automatically detected and displayed in the base screen. The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size. In the above screen, the scan size (the placed original) is A4 (8-1/2"...
Page 575 Specifying the original scan size (Specify using a standard size.) If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original size manually. Place the original in the document feeder tray or on the document glass and follow the steps below. Select the mode and display the image settings screen.
Page 576 Specifying the original scan size (by numerical values) When scanning a non-standard size original such as a card, follow these steps to specify the original size. The width can be from 25 mm to 432 mm (1" to 17"), and the height can be from 25 mm to 297 mm (1" to 11-5/8"). Select the mode and display the image settings screen.
Page 577 Scan/Original Scan Size Send Size X420 Y247 2-Sided 2-Sided Booklet Tablet • When the scan size is specified by numerical values, the send size cannot be specified. • When the automatic document feeder is used, an original longer than 432 mm (17") can be scanned (maximum width 1000 mm (39-3/8")).
Page 578: Specifying The Send Size Of The Image
Specifying the send size of the image Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If a send size smaller than the scan size is selected, the image will be reduced. •...
Page 579 Scan/Original Scan Size 141% Send Size Auto 2-Sided 2-Sided Booklet Tablet The ratio used for reduction or enlargement of the original will appear between the "Scan Size" and the "Send Size". Specify the orientation in which the original is placed. (1) Touch the appropriate [Image Orientation] key.
Page 580: Changing The Exposure And Original Image Type
CHANGING THE EXPOSURE AND ORIGINAL IMAGE TYPE The exposure and original image type can be set appropriately for the original to enable optimum scanning. Refer the following tables to select appropriate settings. How to select the exposure Exposure This setting automatically adjusts the exposure for light and dark parts of the original. (Only Auto when mono2 is set.) Select this setting when the original consists of dark text.
Page 581 Scan mode, USB memory mode, Data entry mode Scan/Exposure Auto Original Image Type Manual Text Prtd.Photo Printed Photo Moiré Reduction Internet fax mode Internet Fax/Exposure Auto Manual • In Internet fax mode, the original image type and moiré reduction cannot be selected. •...
Page 582: Changing The Resolution
CHANGING THE RESOLUTION The resolution setting can be selected. Select the mode and display the image settings screen. (1) Touch the tab of the mode that you wish to use. (2) Touch the [Resolution] key. ☞ IMAGE SETTINGS (page 5-53) Scan mode, USB memory mode, Data entry mode Scan/Resolution 100X100dpi...
Page 583: How To Select The Resolution
For normal text originals, 200X200dpi (200X100dpi in Internet fax mode) produces an image that is sufficiently legible. For photos and illustrations, a high resolution setting (600X600dpi, etc.) will produce a sharp image. However, a high resolution setting will result in a large file, and if the file is too large, transmission may not be possible. In this event, reduce the number of pages scanned or take other measures to decrease the file size.
Page 584 Scan/File Format File Type Compression Mode Encry. TIFF Programmed (1-99) Specified Pages per File Scan/File Format File Type Compression Ratio Encry. TIFF High U-Fine JPEG Programmed (1-99) Specified Pages per File • The [Programmed] key does not appear in USB memory mode. •...
Page 585 Scan/File Format File Type Compression Ratio Encry. TIFF High U-Fine JPEG Programmed (1-99) Specified Pages per File • When a checkmark does not appear in the [Specified Pages per File] checkbox scanned pages. • When [Specified Pages per File] is selected, consecutive numbers are added to the created file names. •...
Page 586: Changing The Format (Internet Fax Mode)
Changing the format (Internet fax mode) The file format for sending an Internet fax is normally set to [TIFF-F]. If the destination Internet fax machine does not support full mode (it only supports simple mode), follow the steps below to select [TIFF-S]. Switch to Internet fax mode and display the file format settings screen.
Page 587: Changing The Colour Mode
CHANGING THE COLOUR MODE This procedure is used to change the colour mode used to scan the original when the [START] key is pressed. This function cannot be used in Internet fax mode. Mode Auto Greyscale The machine detects whether the original is colour or black and white and automatically selects full colour or black and white (Mono2 or Greyscale) scanning.
Page 588: Checking The Image To Be Transmitted (Preview)
CHECKING THE IMAGE TO BE TRANSMITTED (Preview) If you touch the [Preview] key before scanning the original, you can check the scanned image in the touch panel before sending the image. * The factory default setting is disabled. Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch panel.
Page 589: Preview Check Screen
PREVIEW CHECK SCREEN This section explains the preview check screen. Preview Preview image A preview of the scanned original appears. If the image is cut off, use the scroll bars at the right and bottom of the screen to scroll the image. Touch a bar and slide it to scroll.
Page 590: Special Modes
SPECIAL MODES This section explains special modes that can be used in scan send mode. SPECIAL MODES When the [Special Modes] key is touched in the base screen, the special modes menu screen appears. The special modes menu consists of two screens. Touch the touched in the special modes screen, the selected settings are entered and the base screen reappears.
Page 591 Internet fax mode The keys explained below can only be used in Internet fax mode. The other keys are the same as those explained in "Scan mode, USB memory mode, Data entry 1st screen Internet Fax/Special Modes Program Erase Timer 2in1 Mixed Size Build...
Page 592: Storing Scan Operations (Programs)
STORING SCAN OPERATIONS (Programs) A destination, original settings, and functions can be stored in a program. When you wish to use those settings to send an image, they can be retrieved with ease. For example, suppose A4 (8-1/2" x 11") size documents are scanned into a file and sent to each branch office once a month. (1) The same documents are sent to each branch office (2) Each page of a bound document is successively transmitted (3) Smudges on the edges of the documents are erased before transmission...
Page 593 Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the [Program] key. ☞ SPECIAL MODES (page 5-71) Program Program 1 Program 2 Program 3 Program 4 Program 5 Program 6 Program 7 Program 8 Program 9 Program 10 Program 11 Program 12 Program:Program 1...
Page 594: Erasing Peripheral Shadows On The Image (Erase)
ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase) The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function erases the parts of the image where shadows tend to form. The function does not detect shadows and erase only the shadows.) Scanning a thick book Shadows appear here Erase modes...
Page 595 Scan/Special Modes Erase Edge Centre Edge+Centre Erase Erase Erase Side Erase Press the [START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. •...
Page 596: Scanning An Original As Two Separate Pages (Dual
SCANNING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan) The left and right sides of an original can be scanned as two separate pages. This function is useful when you wish to successively scan each page of a book or other bound document. Example: Scanning the left and right pages of a book Book or bound document •...
Page 597 Select the special modes. (1) Touch the tab of the mode that you wish to use. (2) Touch the [Special Modes] key. ☞ SPECIAL MODES (page 5-71) Scan/Special Modes Program Erase Suppress Timer Background Mixed Size Build Original Original File Count Press the [START] key.
Page 598: Sending An Image At A Specified Time (Timer Transmission)
SENDING AN IMAGE AT A SPECIFIED TIME (Timer Transmission) This function lets you specify a time at which a transmission or broadcast transmission will automatically take place. Transmission begins automatically at the specified time. Set a transmission to take place at 20:00 •...
Page 599 Scan/Special Modes Timer Day of the Week When this screen is opened, the setting will show the current time. If the time is not correct, press the [CLEAR ALL] key ) to cancel the operation. Correct the time in the system settings and then perform the timer transmission procedure. ☞...
Page 600: Whitening Faint Colours In The Image (Suppress Background)
WHITENING FAINT COLOURS IN THE IMAGE (Suppress Background) This feature is used to suppress light background areas. • This function cannot be used in Internet fax mode. • When using USB memory mode, connect the USB memory device to the machine before performing the procedure below. Place the original.
Page 601 Scan/Special Modes Suppress Background Light areas of the original may be suppressed as background. Press the [START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. •...
Page 602: Scanning Both Sides Of A Card Ontoa Single Page (Card Shot)
SCANNING BOTH SIDES OF A CARD ONTO A SINGLE PAGE (Card Shot) This function lets you send the front and reverse sides of a card as a single page, without the need to send each side separately. Originals Transmission Front Back •...
Page 603 Scan/Special Modes Card Shot (25~210) (25~210) • You can also touch the • The send size will be selected automatically based on the entered original size. • After selecting Card Shot, you can touch the [Original] key in the base screen to change the original scan size or the send size.
Page 604 Place next original. (Pg.No.x) Press [Start]. When finished, press [Read-End]. Configure If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, resolution, scan size, and send size. The ratio cannot be specified and "Rotation Sending Setting" cannot be selected. To cancel Card Shot...
Page 605: Scanning Many Originals At Once (Job Build)
SCANNING MANY ORIGINALS AT ONCE (Job Build) This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic document feeder, and transmit the pages in a single transmission. Use this function when the number of originals that you wish to scan exceeds the maximum number of sheets that can be inserted in the automatic document feeder at once.
Page 606 Scan/Special Modes Program Erase Suppress Timer Background Mixed Size Build Original Original File Count Press the [START] key to scan the first set of originals. To cancel scanning... Press the [STOP] key ( ) to cancel the operation. Insert the next set of originals and press the [START] key. Repeat until all originals have been scanned.
Page 607: Scanning Originals Of Different Sizes (Mixed Size Original)
SCANNING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original) This feature lets you scan originals of different sizes at the same time; for example, B4 (8-1/2" x 14") size originals mixed together with A3 (11" x 17") size originals. When scanning the originals, the machine automatically detects the size of each original.
Page 608 Scan/Special Modes Program Erase Suppress Timer Background Mixed Size Build Original Original File Count If an original scan size has been specified, a message will appear when the [Mixed Size Original] key is touched. To enable the Mixed Size Original setting, change the scan size setting to auto and then touch the [Mixed Size Original] key again.
Page 609: Scanning Thin Originals (Slow Scan Mode)
SCANNING THIN ORIGINALS (Slow Scan Mode) Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent thin originals from misfeeding. When using USB memory mode, connect the USB memory device to the machine before performing the procedure below. If the originals are inserted with too much force, they may crumple and misfeed.
Page 610 Scan/Special Modes Program Erase Suppress Timer Background Mixed Size Build Original Original File Count Press the [START] key. Scanning begins. A beep will sound to indicate that scanning is finished. To cancel scanning... Press the [STOP] key ( ) to cancel the operation. •...
Page 611: Checking The Number Of Scanned Original Sheets Before Transmission (Original Count)
CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS BEFORE TRANSMISSION (Original Count) The number of scanned original sheets can be counted and displayed before transmission. Checking the number of scanned original sheets before transmission helps prevent transmission mistakes. • This function cannot be used in USB memory mode. •...
Page 612 Press the [START] key. Scanning begins. To cancel scanning... Press the [STOP] key ( XX pages of original have been scanned. Send the scanned data? Cancel If this step is not performed for one minute while the above confirmation screen appears, the scanned image and settings will be cleared and the base screen will reappear.
Page 613: Stamping Scanned Originals (Verif. Stamp)
STAMPING SCANNED ORIGINALS (Verif. Stamp) This function stamps each original that is scanned using the automatic document feeder, allowing you to verify that all originals were correctly scanned. Originals • To use this function, the optional stamp unit must be installed. •...
Page 614 Scan/Special Modes Blank Page Verif. Skip Stamp Press the [START] key. Scanning begins. A beep will sound to indicate that scanning is finished. To cancel scanning... Press the [STOP] key ( • When two-sided originals are used, the front of each original is stamped twice. •...
Page 615: Eliminating Blank Pages From Atransmission (Blank
ELIMINATING BLANK PAGES FROM A TRANSMISSION (Blank Page Skip) When blank pages are included in originals scanned, the blank pages can be detected and automatically eliminated from transmission. Blank pages • This function cannot be used in Internet fax mode. •...
Page 616 Scan/Special Modes Blank Page Skip Skip Blank Page Skip Blank and Back Shadow Press the [START] key. Scanning begins. • If the original was placed on the document glass, replace it with the next original and press the [START] key. When all originals have been scanned, touch the [Read-End] key on the touch panel.
Page 617: Sending Two Pages As A Single Page
SENDING TWO PAGES AS A SINGLE PAGE (2in1) Two original pages can be reduced to half their original size and sent together as a single page. Portrait-oriented originals Landscape-oriented originals This function cannot be used in scan mode, USB memory mode, or data entry mode. Place the original.
Page 618 Select the special modes. (1) Touch the [Internet Fax] tab. (2) Touch the [Special Modes] key. ☞ SPECIAL MODES (page 5-71) Internet Fax/Special Modes Program Erase Timer 2in1 Mixed Size Build Original Original File Count Scan Internet Fax Address Book Original Scan: Auto...
Page 619 Press the [START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [START] key.
Page 620: Changing The Print Settings For The Transaction Report (Transaction Report)
CHANGING THE PRINT SETTINGS FOR THE TRANSACTION REPORT (Transaction Report) A transaction report is automatically printed out to alert you when an Internet fax transmission fails or when a broadcast transmission is performed. The transaction report contains a description of the transmission (date, start time, name of other party, time required, number of pages, result, etc.).
Page 621 Press the [START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [START] key.
Page 622: Checking The Status Of Transmission/Reception Jobs
CHECKING THE STATUS OF TRANSMISSION/RECEPTION JOBS This section explains how to check the status of reserved transmission jobs and received Internet faxes. JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status screen shows the status of jobs by mode.
Page 623: Job Queue Screen And Completed Job Screen
JOB QUEUE SCREEN AND COMPLETED JOB SCREEN The job status screen consists of two screens: the job queue screen that shows reserved jobs and the job currently in progress, and the completed jobs screen. To switch between the two screens, touch the job status screen selector key ((2) below).
Page 624 Job key display The following information is shown in the job queue keys and completed job keys that appear in the job status screen. Direct SMTP information is also included in Internet fax transmission/reception information. AAA AAA (1) (2) Displays the number (position) of the job in the job queue. When the job currently being transmitted is finished, the job moves up one position in the job queue.
Page 625 • Completed job Display Status "Send OK" Transmission was completed. "In Memory" An Internet fax has been received but has not yet been printed. "Received" Printed received fax data. "Forward OK" A received Internet fax has been forwarded. "Stopped" The job was stopped. "Delete"...
Page 626: Operation When A Job In The Job Queue Is Completed
OPERATION WHEN A JOB IN THE JOB QUEUE IS COMPLETED When a normal transmission job is completed, it moves to the completed jobs screen and "Send OK" appears in the status column. Received Internet faxes, timer transmission jobs, and forwarding jobs are handled in the job status screen as explained below.
Page 627: Checking Completed Jobs
CHECKING COMPLETED JOBS You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on completed jobs that used document filing function, broadcast transmission jobs, and received Internet fax forwarding jobs. Touch the key of the job for which you wish to display information in the completed jobs screen and touch the [Detail] key.
Page 628: Stopping A Scan Job Being Transmitted Or Waiting To Be Transmitted
STOPPING A SCAN JOB BEING TRANSMITTED OR WAITING TO BE TRANSMITTED Follow the steps below to stop a job that is being transmitted or is waiting to be transmitted. JOB STATUS Print Job Scan to Fax Job Address Set Time Pages Broadcast 10:00 04/01 020/003 Connecting...
Page 629: Giving Priority To A Scan Transmission Job
GIVING PRIORITY TO A SCAN TRANSMISSION JOB When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If you need to give priority to a job and send it ahead of the other jobs, follow the steps below. JOB STATUS Print Job Scan to...
Page 630: Checking The Internet Fax Activity
CHECKING THE INTERNET FAX ACTIVITY LOG (Image Sending Activity Report) IMAGE SENDING ACTIVITY REPORT You can have the machine print a log of recent image sending activity (date, name of other party, time required, result, etc.). The Image Sending Activity Report contains useful information such as the types of errors that occurred. The most recent 200 transactions are included in the report.
Page 631: Internet Fax Reception Functions
INTERNET FAX RECEPTION FUNCTIONS This section explains the basic procedures for receiving Internet faxes. RECEIVING AN INTERNET FAX The Internet fax function periodically* connects to the mail server (POP3 server) and checks whether or not Internet faxes have been received. When faxes have been received, the faxes are automatically retrieved and printed. * The default setting is once every 5 minutes.
Page 632: Manually Receiving Internet Faxes
MANUALLY RECEIVING INTERNET FAXES If the interval for checking for received faxes is somewhat long and you wish to check immediately, you can manually initiate reception. Touch the [I-Fax Manual Reception] key to connect to the mail server and retrieve received faxes. If POP3 server settings are not configured in the Web pages, the [I-Fax Manual Reception] key is greyed out to prevent selection.
Page 633: Printing A Password-Protected Fax (Hold Setting For Received Data Print)
PRINTING A PASSWORD-PROTECTED FAX (Hold Setting For Received Data Print) "Hold Setting for Received Data Print" in the system settings (administrator) can be enabled to have faxes received to memory without being printed. To print the faxes, a password must be entered. When this function is enabled, a password entry screen appears in the touch panel when received Internet faxes are retrieved.
Page 634: Checking The Image Before Printing
CHECKING THE IMAGE BEFORE PRINTING When "Received Data Image Check Setting" is enabled* in the system settings (administrator), you can check a received image in the touch panel before printing it out. When this function is enabled, follow the steps below to print a received image. * The factory default setting is disabled.
Page 635: Image Check Screen
IMAGE CHECK SCREEN This section explains the image check screen. Image Check AAA AAA Information display This shows information on the displayed image. Preview image An image of the selected received image appears. If the image is cut off, use the scroll bars at the right and bottom of the screen to scroll the image.
Page 636: Forwarding Received Internet Faxes To A Network Address (Inbound Routing Settings)
FORWARDING RECEIVED INTERNET FAXES TO A NETWORK ADDRESS (Inbound Routing Settings) Received Internet faxes can be automatically forwarded to an e-mail address, file server address, desktop address, or network folder address. When this function is enabled, you can also have received Internet faxes forwarded without printing them.
Page 637: Settings
Users without administrator rights can be prohibited from storing, editing, and deleting forwarding tables in this screen, and from specifying which table is used. To do so, select the checkboxes below • Disable Registration of Forward Table • Disable Change/Delete of Forward Table • Disable Change of Forward Approval When inbound routing is enabled, you can also specify whether or not you wish the machine to print the forwarded faxes.
Page 638 • When selecting senders from the "Sender Number/Address Setting" list, you can use the [Shift] key or the [Ctrl] key on your keyboard to select multiple senders. • A maximum of 50 forwarding tables can be stored. • Images sent in TIFF format may not display correctly in some recipient environments. In this event, change the file format to PDF.
Page 639 To delete a forwarding table, click the checkbox next to the table name so that it is selected Specifying forwarding tables to be used. To use the inbound routing function, enable the forwarding tables that you wish to use from among the stored tables. (1) Click [Inbound Routing Settings] in the Web page menu.
Page 640: Scanning From A Computer
SCANNING FROM A COMPUTER (PC Scan Mode) BASIC SCANNING PROCEDURE You can install the scanner driver on your computer from the CD-ROM that accompanies the machine, and use a TWAIN* compliant application to scan an image using your computer. Scanning from your computer is most useful for scanning a single original such as a photo, particularly when you want to adjust scan settings as you scan.
Page 641 Exit Start the TWAIN-compliant application on your computer and select [Select Scanner] from the [File] menu. Select the scanner driver of the machine. (1) Select [SHARP MFP TWAIN K]. (2) Click the [Select] button. 5-122 SCANNER/INTERNET FAX Contents...
Page 642 Sharpd Filel Edit View Too l!> Internet Folder Open. Rename Delete Sharpdesk Folders Print. uire ect ~can From Scanner or Camera. Send As Propertie!> Exit Select [Acquire Image] from the [File] menu. Output Zone Help Ctrl+N The scanner driver opens. Ctrl+O ' - - Ctrl+ P...
Page 643: Preview The Image
• For further information on the scan settings, click the open scanner driver Help. • If the [Preview] button is clicked when scanning from the document feeder tray, only one original page will be scanned for the preview image. If you wish to include that original in the scan, return it to the document feeder tray. SCANNER/INTERNET FAX Preview the image.
Page 644: Select Scanning Settings While Viewing The Image
• For further information on the scan settings, click the • If the originals are placed in the document feeder tray, only the top page will be previewed. The top page will be delivered to the original exit tray. Be sure to return the previewed page to the document feeder tray before previewing again or scanning.
Page 645 [At the machine] This machine is in the PC scan mode. Do not remove the original. Scanner IP address:250.160.102.106 PC scan in progress. Finish PC scan mode? Touch the [Exit] key in the touch panel. Exit Touch the [Yes] key. 5-126 SCANNER/INTERNET FAX Contents...
Page 646: Metadata Delivery
METADATA DELIVERY This section explains metadata delivery, which can be used when the application integration module kit is installed. METADATA DELIVERY (Data Entry) When the application integration module kit is installed and an image file is generated for a scan send transmission, metadata (data indicating the attributes of the image file and how it is to be processed) can be generated based on pre-stored information and transmitted as a separate file.
Page 647: Preparations For Metadata
PREPARATIONS FOR METADATA TRANSMISSION SETTINGS REQUIRED IN THE WEB PAGES All settings related to metadata are configured in the Web pages. (Administrator rights are required.) To configure metadata settings, click [Application Settings] and then [Metadata Settings] in the Web page menu. When configuring settings, be sure to enable metadata transmission.
Page 648: Transmitting Metadata
TRANSMITTING METADATA When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed. If you wish to change the mode or destination, touch the [Cancel] key in the touch panel and then follow the procedure below.
Page 649 Data Entry Metadata Set Set Name:Metadata 1 User ID From Name Reply To DocumentPassword AccessPassword BillCode1 If you accidentally selected the wrong metadata set or wish to use a different metadata set when a default metadata set has been set, touch the [Metadata Set] key. Touch the [OK] key in the message screen that appears. You will return to the screen of step 1.
Page 650: Metadata Fields
• Transmission cannot be performed if the [Data Entry] tab is displayed and no metadata settings have been configured. To perform transmission without sending metadata, switch to a different mode by touching the tab of that mode and then perform transmission. •...
Page 651: Network Scanner / Internet Fax*1
Internet Fax: 200 x 100, 200 x 200, 200 x 400, 400 x 400, 600 x 600 (200 x 100, 200 x 200 when file type is TIFF-S) Halftone can be selected for resolutions other than 200 x 100 dpi. MX-M623N/MX-M753N/MX-M623U/MX-M753U: Colour (A4 / 8-1/2" x 11") One-sided: 75 pages/min. (200 x 200 dpi), Scanning speed Black and white (A4 / 8-1/2"...
Page 652 CHAPTER 6 DOCUMENT FILING This chapter provides detailed explanations of the procedures for using the document filing function. The document filing function allows you to save the document data of a copy or fax job, or the data of a print job, as a file on the machine's hard drive.
Page 653: Overview
DOCUMENT FILING This section provides information that you should know before using the document filing function, including an overview of document filing, the features and functions of document filing, and points to keep in mind when using document filing. OVERVIEW The document filing function allows you to save the document image of a copy or image send job, or the data of a print job, as a file on the machine's hard drive.
Page 654: Uses Of Document Filing
USES OF DOCUMENT FILING Quickly using a file Example: You prepared handouts consisting of numerous pages for a meeting, however, another handout is needed for a newly added participant. The handout was not saved using document filing Ratio and special mode settings must be reselected.
Page 655: Before Using Document Filing
BEFORE USING DOCUMENT FILING This section provides information that you should know before using the document filing function. Folders Three types of folders are used to store files by document filing. Quick File Folder Documents scanned using the [Quick File] key are stored in this folder. A user name and file name are automatically assigned to each job.
Page 656 Maximum number of pages and files that can be stored by document filing Combined total number of pages and total number of files that can be stored in custom folders and in the Main folder Maximum number of pages 20000 Number of pages and number of files that can be stored in the Quick File folder Maximum number of pages 10000...
Page 657: Document Filing
Automatic deletion of files You can have document filing data in specified folders automatically deleted at regular intervals by specifying the folders and the time. Periodic deletion of files stored in the machine helps to prevent the leaking of sensitive information and frees space on the hard drive.
Page 658: Important Points When Using Document Filing
Do not store sensitive documents or documents that you do not want to be used by others. • Except in cases provided for by law, SHARP Corporation bears no responsibility for any damages that result from the leaking of sensitive information due to manipulation by a third party of any data saved using the Quick File function or File function, or incorrect operation of the Quick File function or File function by the operator that saves the data.
Page 659: Using Document Filing In Each Mode
USING DOCUMENT FILING IN EACH MODE In copy or image send mode, the original can be saved as a file on the hard drive at the same time it is copied or transmitted. In addition, Scan to HDD can be used to save the scanned data of an original to the hard drive without copying or transmitting the data.
Page 660 Scan to HDD mode The scanned original is saved as an image file. Neither printing nor transmission are performed when Scan to HDD is used. DOCUMENT COPY IMAGE SEND FILING Ready to scan to HDD. Press [Start] to scan original. File Retrieve Scan to HDD HDD Status...
Page 661: Base Screen Of Document Filing
BASE SCREEN OF DOCUMENT FILING MODE Touch the [DOCUMENT FILING] key in the touch panel to open the base screen of document filing mode. Files stored on the hard drive in the machine can be retrieved from this screen. When user authentication is used and My Folder is configured, the file selection screen of My Folder will appear. If the user that logged in does not have My Folder configured, the folder selection screen will appear.
Page 662: Saving Files With Document Filing
SAVING FILES WITH DOCUMENT FILING This chapter explains how to save an original as an image file using the Quick File, File, and Scan to HDD functions of document filing mode. SAVING A FILE WITH "Quick File" When copying, printing or transmitting a document in copy mode, print mode, or image send mode (excluding USB memory scan mode), "Quick File"...
Page 663 Select copy settings and then press the [START] key. • Copying begins and the scanned document image is saved to the hard drive. The selected copy settings are also saved. • To prevent accidental saving of the document, the message "The scanned data is stored in the quick file folder." appears for 6 seconds (default setting) after the [START] key is pressed.
Page 664: Saving A File With "File
SAVING A FILE WITH "File" When copying, printing or transmitting a document in copy mode, print mode, or image send mode (excluding USB memory scan mode), "File" can be selected to save an image of the document to the Main folder or a previously created custom folder.
Page 665 Select copy settings and then press the [START] key. • Copying begins and the scanned document image is saved to the hard drive. The selected copy settings are also saved. • For the procedure for placing the original, see step 4 of To cancel scanning...
Page 666: File Information
FILE INFORMATION This section explains the settings that are configured in step 3 of a user name, file name, folder, and confidential setting makes it easier to manage and search for a file. In addition, when confidential is selected and a password is established, other people will not be able to view the file without permission. Specifying a user name File Information Confidential...
Page 667 Assigning a file name A file name can be assigned to the file. File Information Confidential Password User Name User Unknown File Name Copy_04042010_112030 Stored to Main Folder Specifying the folder File Information Confidential Password User Name Name 1 File Name file-01 Stored to Main Folder...
Page 668: Storing A File As A Confidential File
Storing a file as a confidential file A password can be set for the file to prevent others from viewing it. Set a password (5 to 8 digits) with the numeric keys. File Information Confidential Password User Name Name 1 File Name file-01 Stored to...
Page 669: Saving A Document File Only
SAVING A DOCUMENT FILE ONLY (Scan to HDD) Scan to HDD is used to store a scanned document in the Main folder or a custom folder. Neither printing nor transmission are performed. "Scan to HDD" SCREEN The following screen appears when the [Scan to HDD] tab is touched in document filing mode. Touch the keys below to select Scan to HDD settings.
Page 670 [Original] key When the [Original] key is touched, the following screen appears. This screen is used to change the original size and select scanning settings for 2-sided originals. Original (1) Touch the [Scan Size] key. If the original is a non-standard size that cannot be detected by auto original size detection, touch the [Scan Size] key and specify the original size. (2) Touch the [Store Size] key.
Page 671 [Colour Mode] key Touch the [Colour Mode] key to open the colour mode setting screen for Scan to HDD. Colour Mode The following settings can be selected for the scanning colour when the [START] key is pressed. Mode The machine automatically detects whether each original is colour or black & white and switches the mode appropriately (full colour for a colour original or black &...
Page 672: Special Modes Screen For Scan To Hdd
Special modes screen for Scan to HDD When the [Special Modes] key is touched, the following screen appears. For more information on each setting, see "SPECIAL MODES" (page 5-71) in "5. SCANNER / INTERNET FAX". Special Modes [Erase] key The erase function is used to erase shadow lines on images produced when scanning thick originals or books on the document glass.
Page 673 Checking the image before storing it (Preview) If you touch the [Preview] key and then start Scan to HDD, the screen below appears. Before the scanned data is stored, you can check a preview of the scanned image in this screen and return to the Scan to HDD settings screen to change settings Preview Preview image...
Page 674: Performing "Scan To Hdd
PERFORMING "Scan to HDD" DOCUMENT COPY IMAGE SEND FILING Ready to scan to HDD. Press [Start] to scan original. File Retrieve Scan to HDD HDD Status File Original Scan: Information Exposure Auto Resolution 600X600dpi Colour Mode Mono2 Special Modes Preview If the original is 2-sided, be sure to touch the [Original] key and then touch the [2-Sided Booklet] key or the [2-Sided Tablet] key as appropriate for the original.
Page 675: Using Stored Files
USING STORED FILES This section explains how to retrieve a file stored by document filing and print or transmit the file. SEQUENCE FOR USING A STORED FILE This section explains the basic procedure for retrieving and using a stored file. The screens and procedures differ depending on whether or not user authentication is enabled.
Page 676 Select the file that you wish to retrieve. File Retrieve Scan to HDD HDD Status Ex Data Access Search Main Folder File Name User Name Date file-01 Name 1 04/04/2010 file-02 Name 2 04/04/2010 file-03.tiff Name 3 04/04/2010 file-04 Name 4 04/04/2010 file-05.tiff Name 5...
Page 677: Folder And File Selection Screens
FOLDER AND FILE SELECTION SCREENS To use a file stored by document filing, the folder and file must be selected. The folder selection screen and file selection screen are explained below. FOLDER SELECTION SCREEN Two different screens appear depending on whether or not user authentication is enabled on the machine. When user authentication is not enabled Folder Select Main Folder...
Page 678: File Selection Screen
FILE SELECTION SCREEN The file selection screen of the Quick File folder, Main folder, and custom folders is explained below. The file selection screen can be displayed in "List screen" format or "Thumbnail screen" format. (To select the format, see "(5) [Switch Display] key" below.) This chapter assumes that the "List screen"...
Page 679 [Multi-File Print] key Touch this to select multiple files in a folder for printing. ☞ MULTI-FILE PRINTING (page 6-33) Sort Order / Display Items This can be used in the thumbnail screen. The order of display of the file thumbnails can be changed in "Sort Order".
Page 680: Selecting A File
SELECTING A FILE This section explains how to select a file to be used. DOCUMENT COPY IMAGE SEND FILING File Retrieve Scan to HDD HDD Status Folder Select Main Folder Quick File Folder User 1 User 2 User 3 User 4 User 5 User 6 User 7...
Page 681: Job Settings Screen
JOB SETTINGS SCREEN When a file key is touched, the following screen appears. Touch the key of the operation that you wish to perform and select settings. File Retrieve Scan to HDD HDD Status Ex Data Access Main Folder File Name User Name file-01 Name 1...
Page 682: Printing A Stored File
PRINTING A STORED FILE A file stored using document filing can be retrieved and printed when needed. The settings used when the file was stored are also stored, and thus the file can be printed again using those settings. The file can also be modified before printing by changing the print settings.
Page 683: Print Settings Screen
PRINT SETTINGS SCREEN [Paper Select] key Use this key to set the paper size. [Output] key Use this key to select Sort, Group or Staple Sort, and to select the output tray. [2-Sided] key Use this key to select the orientation of the image on the reverse side of the paper for 2-sided printing.
Page 684: Multi-File Printing
MULTI-FILE PRINTING Multiple files in a folder can be selected for printing. Main Folder File Name User Name file-01 Name 1 file-02 Name 2 file-03 Name 3 file-04 Name 4 file-05 Name 5 All Files Switch Display Select All Multi-File Print File Name User Name file-01...
Page 685: Printing A Selected File
(2) (3) Job Settings / Print Number of Selected Files: 5 Number of Prints (1 999) Apply the Number from Stored Setting of Each Job. Printing a selected file. The number of selected files appears in the number of selected Cancel files display.
Page 686: Batch Printing
Batch printing All files in a folder that have the same user name and password can be printed at once. When the [Multi-File Print] key is touched, it changes into the [Batch Print] key. Select All Multi-File Print File Name User Name file-01 Name 1...
Page 687 Batch Print User 1/ All Files User Name Name 1 Password Delete the Print and Delete the Data Data Print and Save the Data Batch Print User 1/ All Files User Name Name 1 Password Delete the Print and Delete the Data Data Print and Save the Data Batch Print...
Page 688: Sending A Stored File
SENDING A STORED FILE A file stored by document filing can be retrieved and transmitted whenever needed. The settings used when the file was stored are also stored, and thus the file can be transmitted using those settings. If needed, you can also change the transmission settings to modify the retrieved file.
Page 689: Send Settings Screen
SEND SETTINGS SCREEN The keys that appear in the send settings are explained below. For more information on each of the settings, see SCREEN OF FAX MODE" (page 4-7) in "4. FACSIMILE" and INTERNET FAX". Example of scan mode Send mode tabs Touch the appropriate tab to select fax mode, scan mode, Internet fax mode, etc.
Page 690: Properties Of Stored Files
PROPERTIES OF STORED FILES FILE PROPERTIES A protect setting can be selected for files saved with the document filing function. This prevents a file from being moved, or automatically or manually deleted. Three properties are available for saved files: [Sharing], [Protect], and [Confidential]. When saved with the [Sharing] property, a file is not protected.
Page 691 Restrictions on changing the property • A file that is set to "Sharing" can be changed to "Protect" or "Confidential". However, a "Sharing" file that is saved in the Quick File folder can only be changed to "Protect". • A file that is set to "Protect" can be changed to "Sharing" or "Confidential". However, a "Protect" file that is saved in the Quick File folder can only be changed to "Sharing".
Page 692: Moving A Stored File
MOVING A STORED FILE Use this procedure to change the location of a file (move a file to a different folder). After selecting the desired file, follow the steps below. ☞ SELECTING A FILE (page 6-29) Job Settings file-01 Name 1 Select the job.
Page 693 Job Settings / Move file-01 Name 1 Select the folder the file is moved to. File Name file-01 Move to: User 2 A file whose property is "Protect" cannot be moved. To move a protected file, change its property to "Sharing" or "Confidential".
Page 694: Deleting A Stored File
DELETING A STORED FILE Stored files that are no longer needed can be deleted. Select the file that you wish to delete and touch the [Delete] key. ☞ SELECTING A FILE (page 6-29) Job Settings file-01 Name 1 Select the job. Property Print Send...
Page 695: Checking An Image Of A Stored File
CHECKING AN IMAGE OF A STORED FILE You can check an image of a file stored using document filing. Select the desired file and touch the [Image Check] key. ☞ SELECTING A FILE (page 6-29) Depending on the size of the image, part of the image may be clipped off in the image check screen on the touch panel. Job Settings file-01 Name 1...
Page 696: Image Check Screen
IMAGE CHECK SCREEN This section explains the image check screen. Image Check file-01 Information display This shows information on the displayed image. Preview image This shows an image of the selected file. If the image is cut off, use the scroll bars at the right and bottom of the screen to scroll the image.
Page 697: Retrieving And Using A File From The Job Status Screen
RETRIEVING AND USING A FILE FROM THE JOB STATUS SCREEN Files stored using File and Quick File appear as keys in the job status complete screen. This is convenient when you need to quickly print the saved data of a copy job or quickly send a saved fax to another destination.
Page 698: Searching For A Stored File
SEARCHING FOR A STORED FILE When there are many stored files, it may take time to find a file. The search function of document filing mode can be used to find a file quickly. This section explains how to search for a file or folder on the machine's hard drive. Searching is possible even when you only know part of the file name or folder name.
Page 699 Search User Name File or Folder Name Password (B)(D) User Name Name 1 Name 3 Default User Name 5 Direct Entry Name 7 Name 9 Name 11 ABCD EFGH IJKL User Touch the [User Name] key or the [File Cancel Start Search or Folder Name] key.
Page 700 Search User Name Name 1 File or Folder Name file-01 Password • When you search using [File or Folder Name], custom folders that match the search characters will also appear in the list. When a folder key is touched, a list of the files in the folder appears. Touch the desired file in the list. •...
Page 701 Searching within a folder You can specify a folder to restrict the search range to that folder. To search within a specified folder, follow the steps below. DOCUMENT COPY IMAGE SEND FILING File Retrieve Scan to HDD HDD Status Folder Select Main Folder Quick File Folder User 1...
Page 702 (B)(D) User Name Name 1 Name 3 Default User Name 5 Direct Entry Name 7 Name 9 Name 11 ABCD EFGH IJKL User Using the user name to search There are four ways to select the user name: Cancel (A) Touch the key of the user name. Name 2 The touched user name is highlighted.
Page 703 Search User Name Name 1 File or Folder Name file-01 Password Search within Current Folder Start searching. (1) Touch the [Search within Current Folder] Cancel Start Search checkbox so that it is selected To search only files that are in the current folder, select the [Search within Current Folder] checkbox Use this method to search for a file in a confidential folder.
Page 704 CHAPTER 7 SYSTEM SETTINGS This chapter explains the system settings, which are used to configure a variety of parameters to suit the aims and needs of your workplace. The current selections that have been made for the settings can be viewed or printed out. To quickly check where a setting is located in the system settings menu, see 7-117), "Accessing the System Settings...
Page 705 Storing/Calling of System Settings ..7-100 Sharp OSA Settings ..... . 7-101 SYSTEM SETTINGS FOR FAX System Settings for Fax (General) List .
Page 706: System Settings
SYSTEM SETTINGS System Settings The system settings are used to configure a variety of parameters to suit the aims and needs of your workplace. The system settings are also used to display or print out the current settings and status of the machine. The system settings allow you to make the machine easier to use.
Page 707: Common Operation Methods
Common Operation Methods This section explains special operation methods that are common to all system settings. Be sure to read this section, as the information is omitted in the explanations of some of the individual settings. Example: Address book screen Address Book Sort Address Add New...
Page 708: System Settings (General)
SYSTEM SETTINGS (GENERAL) This section describes the system settings that can be configured by general users of the machine. Accessing the System Settings (General) JOB STATUS PRINT READY DATA SYSTEM SETTINGS IMAGE SEND LINE DATA HOME LOGOUT System Settings Total Count Default Settings Paper Tray Address Control...
Page 709: System Settings (General) List
System Settings (General) List When the system settings are accessed with general rights, the following items appear. For items that can only be accessed with administrator rights, see • Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings. •...
Page 710 Paper Tray Settings Item ■ Paper Tray Settings ● Tray Settings  Tray 1  Tray 2  Tray 3  Tray 4  Tray 5*  Bypass  Select Similar Sizes for Auto Detection  Inserter  Select Similar Sizes for Auto Detection ●...
Page 711 Printer Condition Settings Item ■ Printer Condition Settings* ● Printer Default Settings  Copies  Orientation  Default Paper Size  Default Output Tray  Default Paper Type  Initial Resolution Setting  Disable Blank Page Print  Line Thickness ...
Page 712 Document Filing Control Item ■ Document Filing Control USB-Device Check Item ■ USB-Device Check User Control Item ■ User Control* ● Amend User Information * When user authentication is enabled and the logged-in user does not have the authority to configure the system settings (administrator) (excluding factory default users).
Page 713: Total Count
Total Count This function shows the page count in each mode. Touch the [Total Count] key. Job Count This displays or prints out the counts of all jobs. • A3 (11" x 17") size paper is counted as two sheets. •...
Page 714: Default Settings
Default Settings The default settings for operation of the machine can be configured. Touch the [Default Settings] key and select the settings. Clock Adjust Use this to set the date and time in the machine's built-in clock. Set the time. Item Specify Time Zone Date&Time Settings...
Page 715: Date Format
Date Format The format used to print the date on lists and other output can be changed. Item Current Setting Format Separator Day-Name Position Time Display "Disabling of Clock Adjustment" (page 7-65) has been enabled in the system settings (administrator), the date and time cannot be set.
Page 716: Paper Tray Settings
Paper Tray Settings Paper tray and paper type settings are explained in this section. Touch the [Paper Tray Settings] key to configure the settings. Tray Settings These settings specify the paper type, paper size, and functions allowed for each paper tray. When the [Tray Settings] key is touched, a list appears showing the trays and the current settings.
Page 717 Tray Settings Paper Tray Paper Type Tray 1 Plain, Pre-Printed, Recycled, Letter Head, Pre-Punched, Colour, Tray 2 User Type Same as trays 1 and 2. Tray 3 Heavy Paper, Labels, Transparency Tab paper In addition to the paper types of trays 1 and 2, Tray 4 Heavy Paper* Tray 5...
Page 718: Paper Type Registration
Select Similar Sizes for Auto Detection "Select Similar Sizes for Auto Detection" in the tray settings screen is used to select the paper size that is automatically detected from similar sizes when automatic paper size detection takes place. Select one of two sizes when "Auto-Inch" is set. Select one of three sizes when "Auto-AB" is set. When paper that is the same size as one of the paper sizes in the settings is placed in the bypass tray, the size that is selected in the settings will be automatically detected.
Page 719: Custom Size Registration (Bypass)
Custom Size Registration (Bypass) If you frequently use a special non-standard paper size in the bypass tray, you can store that paper size. Storing the paper size saves you the trouble of setting the size each time you need to use it. Up to three paper sizes can be stored.
Page 720: Address Control
Address Control Address Control is used to store, edit, and delete one-touch keys, group keys, program keys, and custom indexes. Touch the [Address Control] key to configure the settings. • The settings that can be selected vary depending on the peripheral devices installed. •...
Page 721 Settings Item Items stored in all modes Address Type Search Number Address Name Initial Key Name Custom Index Register this Address to be added to the [Frequent Use] index. Items appearing when an e-mail address is stored E-mail Address File Format Items appearing when an Internet fax address is stored I-Fax Address File Format...
Page 722 Item Items appearing when a Direct SMTP address is stored • Direct SMTP Address • Add Hostname or IP Address Too • Hostname or IP Address File Format Items appearing when a group is stored Address Storing group keys This section explains the procedure for storing group keys. Description Use these three settings to set an address for Direct SMTP transmission.
Page 723 AAA AAA CCC CCC EEE EEE Touch the [Address Book] key. Touch the [Add New] key. BBB BBB DDD DDD FFF FFF Select "Group" from the [Address Type] list. Set the [Group Name], [Initial], and [Key Name] settings. (Other settings can be adjusted as necessary.) Use the scroll bar to display the lower part of the screen, and touch the...
Page 724: Custom Index
AAA AAA CCC CCC EEE EEE GGG GGG AAA AAA CCC CCC EEE EEE GGG GGG The group key registration screen appears. If you want to finish, touch [Cancel] key to return to the previous screen. The procedure is complete. Custom Index The name of a custom index can be changed for greater ease of use.
Page 725: Program
Program If you frequently use the same settings and/or functions to transmit to the same destination or destinations, the settings and destinations can be stored in a program. This allows the settings and destinations to be selected by simply selecting the program.
Page 726: Fax Data Receive/Forward
Fax Data Receive/Forward This section explains settings for reception and forwarding. Touch the [Fax Data Receive/Forward] key and configure the settings. For explanations of settings related to the fax function, see I-Fax Settings These settings can be configured when the Internet fax expansion kit is installed. Reception Start Touch this key to immediately connect to your mail server (POP3 server) and check for received Internet faxes.
Page 727: Printer Condition Settings
Printer Condition Settings The Printer Condition Settings are used to configure basic printer settings and settings for printing from a DOS application. To configure the settings, touch the [Printer Condition Settings] key. This setting can be used when the printer expansion kit is installed. Printer Default Settings The default settings are used to set advanced print conditions for printing in an environment where the print driver is not used (such as printing from MS-DOS or from a computer that does not have the provided print driver installed).
Page 728: Pcl Settings
Item Output Quick File *1 When a saddle stitch finisher or finisher is installed. ("Finisher Middle Tray" can only be selected when the finisher (3 trays) is attached.) *2 This setting is used to adjust the line width of vector graphics. Except for CAD and other specialized uses, there is normally no need to change this setting.
Page 729: Postscript Setting
PostScript Setting When an error occurs during PostScript printing, these settings determine whether or not an error notice is printed and whether or not the PostScript data is received in binary format. Settings Item Print PS Error Binary Processing This setting can be configured when the PS3 expansion kit is installed. Description When a PS (PostScript) error •...
Page 730: Document Filing Control
Document Filing Control Document Filing Control is used to create, edit, and delete custom folders for document filing. Touch the [Document Filing Control] key to configure the settings. When the [Document Filing Control] key is touched, the following screen will appear. •...
Page 731: Usb-Device Check
USB-Device Check This lets you check the connection when a USB device is connected to the machine. Touch the [USB-Device Check] key to check the connection. The status of a USB device that is not compatible with the machine will not appear. User Control This section explains settings for user control.
Page 732: System Settings (Administrator)
SYSTEM SETTINGS (ADMINISTRATOR) This section explains the system settings that are configured by the administrator of the machine. Accessing the System Settings (Administrator) To access the system settings (administrator), the administrator must log in as explained below. When User Authentication is not Enabled When "User Authentication Setting"...
Page 733: When User Authentication Is Enabled
When User Authentication is Enabled When "User Authentication Setting" (page 7-49) is enabled, follow the procedure below to log in. When auto login is enabled, the login screen will not appear. When user authentication is by login name and password (and e-mail address) Administrator login is performed in the user selection screen.
Page 734 Login by user number User Authentication • In addition to login by touching the [Admin Login] key, the system settings (administrator) can also be accessed when login is performed by selecting a user with administrator rights from the user list or by entering a user number with administrator rights.
Page 735: System Settings (Administrator) List
System Settings (Administrator) List The system settings that appear following administrator login are shown below. The default setting for each item is also shown. • Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings. •...
Page 736: Operation Settings
Energy save Item ■ Energy Save ● Toner Save Mode  Print*  Copy* ● Auto Power Shut-Off ● Auto Power Shut-Off Timer ● Preheat Mode Setting *1 When the printer function is availabe. *2 This function is not available in some countries and regions. Operation Settings Item ■...
Page 737 Item  Scan*  Customize 1  Customize 2  Customize 3  Internet Fax*  (Same as Scan)  Fax*  (Same as Scan)  USB Memory Scan  Customize 1  Customize 2  Customize 3  Data Entry* ...
Page 738 Item  Operation from Specified PC  Operational Authority  Hostname or IP Address of PC  View Password Entry Screen  Operation by User who Has Password  Operational Authority  View Password Entry Screen ● Soft Keyboard Template Setting *1 This cannot be set on the machine.
Page 739 Item  Disabling of Finisher*  Disabling of Inserter*  Disabling of Offset  Disabling of Stapler*  Disabling of Punch* ● Fusing Control Settings *1 When a saddle stitch finisher is installed. *2 When a finisher is installed. *3 When a large capacity tray is installed. *4 When a saddle stitch finisher or finisher is installed.
Page 740 Item  Disabling Deletion of Job Programs  Disabling of Bypass-Tray in Duplex Copy  Disabling of Auto Paper Selection  Auto Selection Setting of Tray that is Supplied the Paper  600dpi x 600dpi Scanning Mode for Document Feeder ...
Page 741 Printer Settings Item ■ Printer Settings* ● Default Settings  Prohibit Notice Page Printing  Prohibit Test Page Printing  A4/Letter Size Auto Change  Print Density Level  Bypass Tray Settings  Enable Detected Paper Size in Bypass Tray ...
Page 742 Item  Initial Resolution Setting • Scan* • Internet Fax* • Fax*  Default Exposure Settings • Original Image Type • Moiré Reduction  Must Input Next Address Key at Broadcast Setting  Scan Complete Sound Setting  The Number of File Name/Subject/Body Keys Displayed Setting ...
Page 743 Item  Own Name and Destination Set  Sender Data Registration • Sender Name • Sender Fax Number • I-Fax Own Address  Registration of Own Name Select ● Scan Settings*  Other Settings  Default Sender Set  Default Colour Mode Settings ...
Page 744 Item  Transaction Report Print Select Setting • Single Sending • Broadcasting • Receiving  Activity Report Print Select Setting • Auto Print at Memory Full • Print Daily at Designated Time  Body Text Print Select Setting  Pre-Setting Mail Signature ...
Page 745 Document Filing Settings Item ■ Document Filing Settings ● Other Settings  Default Mode Settings  Sort Method Setting  Administrator Authority Setting  Delete File  Delete Folder  Change Password  Delete All Quick Files  Delete  Delete quick files at power up (protected files excluded) ...
Page 746 Item ● Document Output Options  Print  Copy  Print*  Scan Send*  Internet Fax Send (Incl. PC-I-Fax)*  Fax Send (Incl. PC-Fax)*  Scan to HDD  Scan Send*  Copy  Scan Send  Internet Fax Send (Incl. PC-I-Fax)* ...
Page 747 List Print (Administrator) Item ■ List Print (Administrator) ● Administrator Settings List ● Image Sending Activity Report ● Data Receive/Forward List* ● Web Settings List* ● Metadata Set List* *1 When the network scanner function is available. *2 When network connection is enabled. *3 When the application integration module is installed.
Page 748 Enable/Disable Settings Item ■ Enable/Disable Settings ● Printer Condition Settings*  Disable Blank Page Print ● User Control  Disabling of Printing by Invalid User ● Operation Settings  Cancel Auto Clear Timer  Disabling of Job Priority Operation  Disabling of Bypass Printing ...
Page 749 Item ● Image Send Settings  Other Disabling  Disable Switching of Display Order  Disable Scan Function • PC Scan • USB Memory Scan  Settings to Disable Registration  Disable Registering Destination from Operation Panel  Disable Registering Destination on Web ...
Page 750 Product Key Item ■ Product Key* ● Serial Number ● Network Scanner Expansion Kit ● Printer Expansion Kit ● PS3 Expansion Kit ● Internet Fax Expansion Kit ● E-mail Alert and Status ● Application Integration Module ● Application Communication Module ●...
Page 751 Sharp OSA Settings Item ■ Sharp OSA Settings* ● External Account Setting  External Account Control  Enable Authentication by External Server ● USB Driver Settings  External Keyboard  USB Memory  Level of Encryption ● Job Priority Preference * When the external account module or application communication module is available.
Page 752: User Control
User Control User Control is used to configure settings for user authentication. Touch the [User Control] key to configure the settings. User Authentication Setting These settings enable or disable user authentication and specify the authentication method. When user authentication is enabled, each user of the machine is registered. When a user logs in, settings for that user are applied.
Page 753: Other Settings
Other Settings Actions when the Limit of Pages for Output Jobs This setting determines whether or not a job will be completed if the page limit is reached while the job is in progress. The following selections are available. • Job is Stopped when the Limit of Pages is Reached •...
Page 754 Perform LDAP server access control. Access control information for page count limits, authorities, and favourite operations can be stored on an LDAP server, and by using this LDAP server for network authentication, user authentication based on the stored access control information can be performed. This can be used when user authentication is performed by network authentication using an LDAP server or a directory service (Active Directory, etc.).
Page 755 Item Description E-mail Address Information is acquired from the LDAP server. My Folder Pages Limit Group Authority Group Favourite Operation Group * If the user name cannot be acquired, the first 16 characters of the text string entered as the user name for network authentication is used.
Page 756: User List
User List This is used to store, edit, and delete users when user authentication is enabled. When the [User List] key is touched, the following screen appears. • [Add New] key Use this to add a new user. • [Delete All Users] key Use this to delete all stored users.
Page 757 Pages Limit Group Unlimited* Authority Group* Admin Favourite Operation Group Following the System Settings* Card Settings* Not set *1 Items that can be changed. *2 For detailed information of each of the settings, see *3 When the HID card reader is available. Settings Item Store the name of the user (max.
Page 758: Page Limit Group List
Page Limit Group List This is used to store groups of Account Limit Settings. The page limits for each user are specified by selecting one of these stored groups when the user is stored. When the [Page Limit Group List] key is touched, the following screen appears. •...
Page 759: Authority Group List
Authority Group List Use this to store groups of user authority settings. The authority of each user is specified by selecting one of these stored groups when the user is stored. When the [Authority Group List] key is touched, the following screen appears. •...
Page 760 List of settings and factory default settings of template groups Item Group Name Select the Group Name to be the Registration Model Copy Copy Approval Setting Special Modes Usage Printer Printer Approval Setting FTP Pull Print USB Memory Direct Print Network Folder Pull Print Image Send Approval Settings for Each Mode...
Page 761 Item Prints (Document Filing) • Document Filing Approval Setting • Special Modes Usage • Document Filing Image Check Common Functions Approval Settings for 2-Sided Print Output Approval Settings MFP Settings System Settings Operational Authority System Settings* Web Settings Operational Authority Display of Device /Network Status Power Reset Machine Identification...
Page 762: Favourite Operation Group List
Favourite Operation Group List This is used to store favourite operation groups and My Menu. This setting can only be configured in the Web pages. It cannot be configured in the touch panel of the machine. Favourite Operation Group Registration Sets of preferred settings can be as groups.
Page 763 My Menu List Home screen settings must be previously stored. Select a My Menu when storing a favourite operation group. Settings Item My Menu Name Enter a maximum of 32 characters for the My Menu name. Select the My Menu to be the Select one of the previously stored My Menus as a template for the new My Menu.
Page 764: User Count
User Count This displays the total number of pages printed by each user. When the [User Count] key is touched, the following screen appears. • [Select All Users] key This selects all users. • [Show] key This shows the counts of the selected user. •...
Page 765: Card Settings
Reset all items of the selected users to "0". Card Settings (when the HID card reader is available.) Configure this setting if user authentication will be performed using a Sharp OSA external authentication application and an HID card. Card Reader Device Registration In this setting, the product ID and vender ID of the connected HID card reader are displayed.
Page 766: Energy Save
Energy Save The Energy Save settings help reduce power costs. From an environmental perspective, these settings also help reduce pollution and conserve natural resources. Touch the [Energy Save] key to configure the settings. Toner Save Mode You can reduce the amount of toner used for printing. Print Print example data...
Page 767: Operation Settings
Set the screen that appears after auto clear and login. You can select the base screen of copy, fax / image send, or document filing mode, the home screen, or the Sharp OSA screen. Initial value Disabling of Job Priority Operation...
Page 768: Disabling Of Clock Adjustment
Disabling of Clock Adjustment This setting is used to prohibit changing of the date and time. Disabling of Covers/Inserts Mode This setting is used to prohibit the use of the covers and inserts function. Set Keyboard Priority When an external keyboard is connected, you can select whether the soft keyboard or the external keyboard is used.
Page 769: Mfp Display Pattern Setting
When [Use Custom Image] is selected, the Mode Key image can be changed using a gif file Image of up to 10 KB in size. A shortcut to the Sharp OSA application and keys that appear in "My Menu" can be stored (a Application Keys total of eight keys can be stored).
Page 770: My Menu Settings
My Menu Settings Use this to configure the My Menu screen that appears when the [My Menu] key is pressed. The settings are shown below. Item Display Title Show a title on the My Menu. Title Enter a maximum of 70 characters for the title name. Display the User Name* Show the currently logged-in user name on the My Menu.
Page 771: Preview Setting
Preview Setting Configure settings for the preview screen that can be used for fax / image send and document filing. Default Preview Set the selection state of the [Preview] key in each of the screens below. Copy Image Send • Scan Send •...
Page 772: Device Control
Device Control These settings control devices installed on the machine. Touch the [Device Control] key to configure the settings. Other Settings Original Feeding Mode The following original feeding modes can be set to operate by default in copy, Scan to HDD, and image send modes.
Page 773: Clear All Job Log Data
Detect Standard in Auto Colour Mode When the colour mode is set to auto in image send mode, the discrimination point for detecting whether originals are colour or black and white can be set to one of 5 levels. To make it easier to detect a black and white original, adjust the setting toward [Closer to B/W].
Page 774: Original Size Detector Setting
Original Size Detector Setting One of the 8 groups of standard original sizes shown below can be selected for detection by the original size detection function. Selections A3, A4, A4R, A5, B4, B5, B5R AB-1 A3, A4, A4R, A5, B5, B5R, 216 mm x 330 mm AB-2 (8-1/2"...
Page 775: Disabling Of Finisher
Disabling of Devices Use these settings when a peripheral device on the machine has failed or when you wish to temporarily disable a device. Disabling of Document Feeder Use this setting to prohibit the use of the automatic document feeder, such as when the feeder malfunctions. (When the setting is enabled, scanning is still possible using the document glass.) Disabling of Duplex...
Page 776: Copy Function Settings
Copy Function Settings The following settings are related to copying. Touch the [Copy Function Settings] key to configure the settings. Default settings selected with these settings apply to all functions of the machine (not just the copy function). Initial Status Settings The copier settings are reset when the [POWER] key ( when the auto clear interval has elapsed.
Page 777: Other Settings
Other Settings Copy Exposure Adjustment This is used to adjust the exposure level when [Auto] is used for the copy exposure. Select separate settings for the document glass and for the automatic document feeder. Rotation Copy Setting When the original and paper are placed in different orientations, this function automatically rotates the image 90 degrees to enable correct copying on the paper.
Page 778: Disabling Deletion Of Job Programs
Disabling Deletion of Job Programs This is used to prohibit the deletion and changing of copy settings stored in job programs. Disabling of Bypass-Tray in Duplex Copy This is used to prohibit the use of the bypass tray when making two-sided copies. The bypass tray is often used to feed label sheets, transparency film, and other special media for which two-sided copying is prohibited.
Page 779: Network Settings
Network Settings Network settings are described below. Touch the [Network Settings] key to configure the settings. When settings are changed, the changes will take effect after the machine is restarted. To restart the machine see "TURNING THE POWER ON AND IPv4 Settings When using the machine on a TCP/IP (IPv4) network, use this setting to configure the IP address of the machine.
Page 780: Printer Settings
Printer Settings Settings related to the printer function can be configured. Touch the [Printer Settings] key to configure the settings. These settings can be used when the printer function is enabled. Default Settings Printer condition settings are described below. Prohibit Notice Page Printing This setting is used to disable printing of notice pages.
Page 781: Interface Settings
Interface Settings These settings are used to control and monitor data transmitted to the USB port or network port of the machine. Hexadecimal Dump Mode This function is used to print the print data from a computer in hexadecimal format together with the corresponding ASCII text.
Page 782: Image Send Settings
Image Send Settings Settings related to the image send function (scan, Internet fax, etc.) can be configured. Touch the [Image Send Settings] key to configure the settings. For explanations of settings related to the fax function, see Operation Settings The operation settings below apply to all image send functions. Other Settings Default Display Settings You can select one of 5 base screen types for the base screen...
Page 783: Scan Complete Sound Setting
Must Input Next Address Key at Broadcast Setting This setting is used to require that the [Next Address] key be touched before the next address is entered when performing a broadcast transmission. When this setting is enabled, the [Next Address] key cannot be omitted even if the next address is entered with a one-touch key.
Page 784: Disable Registration Of Program
Disable Registration of Program This prohibits the use of the address book when a program is stored. Configure the setting for each of the following items: • E-mail • FTP • Desktop • Network Folder • Internet Fax (Including Direct SMTP) •...
Page 785 SYSTEM SETTINGS Own Name and Destination Set Use this setting to enter the Internet fax address, fax number of the machine and the name of the user. Sender Data Registration Use this to store the sender name for fax and Internet fax, the sender number for fax, and the sender address for Internet fax.
Page 786: Scan Settings
Scan Settings Settings related to scanning can be configured. These settings can be configured when the network scanner function is enabled. Other Settings Default Sender Set The information stored here is used if you do not specify [Reply-To] in the send settings when performing Scan to E-mail.
Page 787: Default Address Setting
Maximum Size of E-mail Attachments (E-mail) To prevent the transmission of excessively large image files by Scan to E-mail, a file size limit can be set from 1 MB to 10 MB in increments of 1 MB. If the total size of the image files created by scanning the original exceeds the limit, the image files are discarded.
Page 788: I-Fax Settings
I-Fax Settings These settings can be configured when the Internet fax expansion kit is installed. I-Fax Default Settings These settings are used to configure the default settings for Internet fax. Auto Wake Up Print When the [POWER] key ( ) is "off" (but the main power switch is "on") and an Internet fax is received, this function activates the machine and prints the fax.
Page 789: Activity Report Print Select Setting
Activity Report Print Select Setting This is used to have the Image Sending Activity Report stored in the machine's memory automatically print at specified times. The Image Sending Activity Report can be set to automatically print each time the number of transactions reaches 201, and it can also be set to automatically print at a specified time (once a day only).
Page 790: I-Fax Receive Settings
Rotation Sending Setting When transmitting an image that is one of the following sizes, this function rotates the image counterclockwise 90 degrees. (The setting can be configured separately for each size.) A4, B5R, A5R, 8-1/2 x 11", 5-1/2" x 8-1/2"R, 16K 8-1/2"...
Page 791: I-Fax Output Setting
Letter Size RX Reduce Print This program is not available in Canada and Philippines. When a letter-R (8-1/2" x 11"R) size fax is received, this setting reduces the fax to A4R size. When this setting is enabled, A4R size faxes are also reduced.
Page 792: Document Filing Settings
Document Filing Settings Document filing settings are described below. Touch the [Document Filing Settings] key to configure the settings. Other Settings Default Mode Settings This is used to specify which mode, Sharing or Confidential, is used as the default mode when storing a file.
Page 793: Card Shot Settings
Scan Complete Sound Setting This setting adjusts the volume of the beep that sounds when scanning ends. The beep can also be turned off. Default Output Tray (When the finisher or saddle stitch finisher is installed.) This setting is used to select the default output tray for printing a file stored by Scan to HDD.
Page 794: Document Output Options
Document Output Options The use of a stored file can be allowed or prohibited by operation type and by the mode from which the file was stored. The items that appear will vary depending on the functions that have been added to the machine. Item Print For each mode, select whether or not printing of stored files is allowed.
Page 795: List Print (Administrator)
List Print (Administrator) This is used to print lists and reports that are only for use by the administrator of the machine. Touch the [List Print (Administrator)] key to configure the settings. Administrator Settings List Lists of the administrator settings for the following modes can be printed.
Page 796: Security Settings
Security Settings The following settings are related to security. Touch the [Security Settings] key to configure the settings. SSL Settings SSL can be used for data transmission over a network. SSL is a protocol that enables the encryption of information communicated over a network. Encrypting data makes it possible to transmit and receive sensitive information safely.
Page 797: Enable/Disable Settings
Enable/Disable Settings The following settings are used to prohibit the use of certain functions. Touch the [Enable/Disable Settings] key to configure the settings. The Enable/Disable Settings control the same parameters as the enable/disable settings in other settings. The settings are linked together (changing one setting changes the other).
Page 798: Printer Settings
Disabling of Master Machine Mode This prohibits the use of the machine as a master machine for tandem printing. (Normally this setting is not necessary.) Disabling of Slave Machine Mode This prohibits the use of the machine as a slave machine for tandem printing.
Page 799: Document Filing Settings
Disable Registering Destination on Web Page (When network connection is enabled.) This disables address control from the Web pages. • Group (Direct Entry) • Group (Address Book) • Individual Select All: Select all items. Clear Checked: Clear all selections. Disable Registration of Program This prohibits the use of the address book when a program is stored.
Page 800: Change Administrator Password
SYSTEM SETTINGS Change Administrator Password This is used to change the administrator password. Touch the [Change Administrator Password] key to change the password. When changing the password, be sure to remember the new password. It is recommended that you periodically change the administrator password. Password Enter the new administrator password (5 to 32 characters).
Page 801: Product Key
Product Key The procedures for entering the product keys of the expansion kits are explained below. Touch the [Product Key] key to configure the settings. • It may not be possible to use some settings, depending on the peripheral devices installed. •...
Page 802: Data Backup
• This function cannot be used while the system settings are in use, while a job is being executed, or when there is a reserved job. • For machines for which data can be imported, contact your SHARP dealer or nearest authorised service representative. Storage Backup...
Page 803: Storing/Calling Of System Settings
• Product Keys: Product Keys are not stored as reissue of keys may be necessary. • Images of background and Icon for Home screen and Sharp OSA screen. Restore Configuration Use this to restore settings stored with Configuration". The current settings will change to the retrieved settings.
Page 804: Sharp Osa Settings
"TURNING THE POWER ON AND OFF" (page 1-15) in "1. BEFORE USING THE MACHINE ". Job Priority Preference Set the playing speed of the animation in the Sharp OSA application. The following settings can be configured. • Printing • Balanced •...
Page 805: System Settings For Fax
SYSTEM SETTINGS FOR FAX This section explains system settings that are specifically for the fax function. The system settings for the fax function can only be configured when the facsimile expansion kit is installed. System Settings for Fax (General) List When the system settings for fax are accessed with general rights, the following items appear.
Page 806: Address Control
Address Control Address Book This section explains items specifically used for fax in "Address Control". For items that are also used for other functions, see "Address Control" (page 7-17). When the [Address Book] key is touched, the following screen appears. •...
Page 807 Settings Item General items stored Address Type Search Number Address Name Initial Key Name Custom Index Register this Address to be added to the [Frequent Use] index. Fax Number Transmission Mode Description Select the type of address to be stored in the address book. In this case, select [Fax].
Page 808: Editing And Deleting A Memory Box
F-Code Memory Box This section explains how to store memory boxes for various types of F-code communication. When the [F-Code Memory Box] key is touched, the following screen appears. • [Add New] key Use this to add a new memory box. Storing a memory box Touch the [Add New] key in the above screen to open a registration screen.
Page 809 Settings Item Items common to all types Box Type Memory Box Name Sub Address / Passcode Items displayed when storing a confidential memory box Print PIN Items displayed when storing a relay broadcast memory box Recipients • When programming a new memory box, a sub-address that is already programmed for another box cannot be used. However, the same passcode can be used for more than one memory box.
Page 810: Fax Data Receive/Forward
Fax Data Receive/Forward This section explains settings for reception and forwarding. Fax Settings The following items appear when the "Fax Settings" are configured. Item Receive Setting Multiple Set Print Staple Forward Received Data • If some pages of a fax that is being forwarded were successfully printed, only those pages that were not printed will be forwarded.
Page 811: System Settings For Fax (Administrator) List
System Settings for Fax (Administrator) List When the system settings for fax are accessed with administrator rights, the following items appear. For information on the general settings, see "System Settings for Fax (General) • For the procedure for using the system settings (administrator), see 7-29).
Page 812 Item  Transaction Report Print Select Setting • Single Sending • Broadcasting • Receiving • Confidential Reception  Activity Report Print Select Setting • Auto Print at Memory Full • Print Daily at Designated Time   Distinctive Ring Detection ...
Page 813: Image Send Settings
Image Send Settings Settings related to the image send function (scan, Internet fax, etc.) can be configured. Touch the [Image Send Settings] key to configure the settings. Fax Settings Fax Default Settings The fax settings can be enabled or disabled to suit the needs of your workplace.
Page 814: Pbx Setting
Original Print on Transaction Report When a transaction report is printed for a memory transmission, this is used to print part of the first page of the transmitted original on the transaction report. Select one of the settings below. • Print Out All Report •...
Page 815: Fax Send Settings
Fax Send Settings Settings for fax transmission can be configured. Auto Reduction Sending Setting This setting is used to have the size of transmitted faxes automatically reduced to match the size of the paper in the receiving machine. If the setting is disabled, faxes are sent at full size. Because the size is not adjusted to match the size of the printing paper, part of the received fax may be cut off.
Page 816: Recall In Case Of Line Busy
Recall in Case of Line Busy This program is used to set the number of recall attempts and the interval between recall attempts when a transmission is not successful due to the line being busy or other reason. Number of Times to Recall When Line is Busy This setting specifies whether or not recalling is performed when the line is busy.
Page 817: Fax Receive Settings
Fax Receive Settings Settings for fax reception can be configured. Number of Calls in Auto Reception This setting is used to select the number of rings on which the machine automatically receives a call and begins fax reception in auto reception mode. The "Number of Calls in Auto Reception"...
Page 818: A3 Rx Reduce
Letter Size RX Reduce Print This program is not available in Canada and Philippines. When a letter-R (8-1/2" x 11"R) size fax is received, this setting reduces the fax to A4R size. When this setting is enabled, A4R size faxes are also reduced.
Page 819: Fax Polling Security
Fax Polling Security The following settings are for regular polling memory using the Public Box. Set Fax Polling Security When the memory polling function is used, this setting determines whether any machine will be allowed to poll your machine, or only machines that have been stored in your machine.
Page 820: System Settings Menu
SYSTEM SETTINGS MENU Total Count Default Settings List Print (User) Paper Tray Settings Address Control Fax Data Receive/Forward Printer Condition Settings Document Filing Control USB-Device Check User Control User Control Energy Save Operation Settings Device Control Copy Settings Network Settings Printer Settings Job Count Device Count...
Page 821 Change Administrator Password Product Key Data Backup Storage Backup Storing/Calling of System Settings Restore Factory Defaults Sharp OSA Settings External Account Setting Scan Complete Sound Setting Default Display Settings The Number of File Name/Subject/Body Address Book Default Selection Keys Displayed Setting...
Page 822: Chapter 8 Troubleshooting
CHAPTER 8 TROUBLESHOOTING This chapter provides solutions to possible problems in a question and answer format. Locate the question that relates to your problem and use the answer to help correct the situation. If you are unable to solve a problem using this manual, please contact your dealer or nearest authorised service representative.
Page 823 DOCUMENT FILING • PROBLEMS RELATED TO FILING ..8-44 • PROBLEMS RELATED TO FILE MANAGEMENT ......8-45 GENERAL PROBLEMS •...
Page 824: Troubleshooting Problems
TROUBLESHOOTING PROBLEMS The chart below shows the procedure to follow in the event a problem occurs. Use it as a troubleshooting guide. Press the [POWER] key ( ) to turn off the power and switch the main power switch to the "off" position. Wait at least 10 seconds and then switch the main power switch and the [POWER] key ( •...
Page 825: Frequently Asked Questions
FREQUENTLY ASKED QUESTIONS Making a copy of a non-standard size original The procedure for making a copy of a payment slip or other non-standard size original is explained below. The "Centring" special mode of copy mode can be selected to position the copied image in the centre of the paper.
Page 826: I Can't Print From A Computer
Also check that the printer driver port is set correctly. Checking the printer name Check here Checking port settings in the printer driver SHARP MX-XXXX Do your port settings look like this? SHARP MX-XXXX Your port settings should look like this.
Page 827: Changing The Paper Size Used For A Print Job
Changing the paper size used for a print job Paper Empty 1 Check details on the job. Print Job Scan to Fax Job Internet Fax Job Queue Sets / Progress Status Copy 020 / 001 Copying Computer01 020 / 000 Paper Empty Copy 002 / 000...
Page 828: Adjusting The Volume Of The Ringer
Adjusting the volume of the ringer The machine starts printing when I try to forward data... Before forwarding received fax data to a shared folder, check that destination computer is turned on. If the computer is not turned on, the machine prints the received fax data.
Page 829: Removing Misfeeds
REMOVING MISFEEDS This section explains what to do when a paper misfeed occurs in the machine. Caution The fusing unit and paper exit area are hot. Take care not to burn yourself when removing a misfeed. • Carefully pull the paper out without tearing it. •...
Page 830: Paper Misfeed Illustrations
PAPER MISFEED ILLUSTRATIONS If you require more information when reading the instructions in the touch panel, see the paper misfeed illustrations below. Refer to the illustration below and then go to the appropriate illustration (1 to 14) for your situation. ☞...
Page 831 Remove any misfed paper. Be careful not to tear the misfed paper during removal. Lift (A) up in the direction of the arrow and remove any misfed paper. After removing the misfed paper, return (A) to its original position. Open the front covers on the right and left of the finisher.
Page 832 If a misfeed was not found in the above step, remove the misfed paper from under the paper guide. Be careful not to tear the misfed paper during removal. Return the paper guide lever to its original position. (4) Original misfeed Open the document feeder cover and remove the misfed originals.
Page 833 (7) Paper misfeed in the bypass tray Remove the misfed paper from the bypass tray. Be careful not to tear the misfed paper during removal. (8) Paper misfeed in the bypass tray (side) Open the side cover and remove the misfeed. (9) Paper misfeed in tray 3 and tray 4 (side) Open the lower cover on the left side of the machine.
Page 834 If misfed paper is not found in the previous step’s illustration, pull out paper tray 3 and remove the misfed paper. Pull the tray all the way out until it stops. Check the paper transfer unit inside the tray. Be careful not to tear the misfed paper during removal.
Page 835 (13) Paper misfeed in the large capacity tray Close the bypass tray. Open the top cover of tray Open the top cover and remove the misfed paper. After removing the misfed paper, close the top cover. (14) Paper misfeed in the saddle stitch finisher (bottom) Open the front cover of the inserter (only when an...
Page 836: Removing Staple Jams
REMOVING STAPLE JAMS Follow the steps below to remove a staple jam. ☞ FINISHER UNIT (page 8-15) ☞ SADDLE STITCH UNIT (page 8-17) ☞ FINISHER (3 TRAYS) (page 8-19) FINISHER UNIT Stapling area Do not touch the stapling area. The stapler could injure you. TROUBLESHOOTING Open the front cover of the finisher.
Page 837 Holding the knob, return part (A) to its original position. Press firmly until you hear a "click". Return the staple case to its original position. Insert the cartridge all the way in until it clicks into place. Close the front cover of the finisher. 8-16 TROUBLESHOOTING Contents...
Page 838: Saddle Stitch Unit
SADDLE STITCH UNIT Jammed staples Do not touch the stapling area. The stapler could injure you. TROUBLESHOOTING Open the lower cover of the saddle stitch finisher. When an optional inserter is installed, open the front cover of the inserter before opening the lower cover of the finisher. Slide out the saddle stitch unit carefully toward the front.
Page 839 Return the saddle stitch holder and the saddle stitch unit to their respective original positions. Make sure that the finisher is firmly attached to the machine and that A3, A4R, or B4 (11" x 17", 8-1/2" x 11"R, or 8-1/2" x 14") size paper is loaded. If one of the above paper sizes is not set, test stapling cannot be performed.
Page 840: Finisher (3 Trays)
FINISHER (3 TRAYS) Open the front cover on the left of the finisher. (1) Lift the green stapler lever. (2) Slide out the staple cartridge. Hold the knob and lower part (A). Remove the jammed staples. Hold the knob and return part (A) to its original position.
Page 841 TROUBLESHOOTING Put the staple cartridge back into the stapler. Push the staple cartridge in until the tabs engage and then push it down until it clicks into place. Close the front cover of the finisher. 8-20 Contents...
Page 842: Installing The Software
INSTALLING THE SOFTWARE WHEN INSTALLATION WAS NOT SUCCESSFUL • The software cannot be installed........... . .8-21 •...
Page 843: Troubleshooting
Problem The machine is not Is the machine power on? detected (when connected to a network). Is your computer connected correctly to the machine? The plug and play Is the machine power on? screen does not appear (USB connection in Windows).
Page 844: The Printer Driver Cannot Be Installed (Windows 2000/Xp/Server 2003)
Problem The printer driver is Did you connect the machine to your not installed correctly computer before installing the printer by plug and play (USB driver? connection in Windows).  The printer driver cannot be installed (Windows 2000/XP/Server 2003) If the printer driver cannot be installed on Windows 2000/XP/Server 2003, follow the steps below to check your computer settings.
Page 845: Problems Related To Copying Operation
COPYING PROBLEMS RELATED TO COPYING OPERATION • Copying does not take place............8-24 •...
Page 846 Problem Two-sided copying Does the paper type setting of the does not take place. selected tray specify a type of paper that cannot be used for two-sided copying? Are you using a special size or type of paper? Are you copying using settings that do not allow two-sided copying? Have functions been disabled by the administrator?
Page 847: Problems Related To Copy Results
PROBLEMS RELATED TO COPY RESULTS Problem The image is too light Is the image too light or too dark? or too dark. Has an appropriate exposure mode for the original type been selected? Part of the image is Has an appropriate ratio been selected cut off.
Page 848: Problems Related To Printing Operation
PRINTING PROBLEMS RELATED TO PRINTING OPERATION • Printing does not take place............8-27 •...
Page 849 Problem Printing does not take Is the IP address selected correctly? place. (Windows) Are you using a printer port created using Standard TCP/IP Port? (Windows 2000/XP/Server 2003/Vista/ Server 2008/7) Is "Connect via" set to [Ethernet] for AppleTalk? (Mac OS 9.0-9.2.2) Is your computer in an unstable state? Is the machine specified correctly in the software application that you are using...
Page 850 Problem Printing does not take Was a Notice Page printed? place. Have functions been disabled by the administrator? Two-sided printing Does the paper type setting of the does not take place. selected tray specify a type of paper that cannot be used for two-sided printing? Are you using a special size or type of paper? Have functions been disabled by the...
Page 851: Problems Related To Print Results
PROBLEMS RELATED TO PRINT RESULTS Problem The image is grainy. Are the printer driver settings appropriate for the print job? The image is too light Does the image (particularly a photo) or too dark. need correction? (Windows) Text and lines are faint Was colour data printed? and difficult to see.
Page 852 Problem The image is upside Are you using a type of paper (tab down. paper, punch paper, etc.) that can only be loaded in a fixed orientation? Is the correct binding position selected for two-sided printing? Many nonsense Is your computer or the machine in an characters are printed.
Page 853 FACSIMILE PROBLEMS RELATED TO TRANSMISSION • Transmission does not take place........... .8-33 •...
Page 854: Problems Related To Transmission
PROBLEMS RELATED TO TRANSMISSION Problem Transmission does Is the telephone line connected not take place. securely? Is the correct dial mode set for your line? Is a busy signal received? Did a communication error occur? Does a message appear indicating that the memory is full? Does a message appear notifying you that the original size was not detected?
Page 855 Problem Transmission does Does the job status screen (completed not take place. jobs) or a transaction report indicate that the transmission was not successful? Did you place a long size original on the document glass when it is scanned? Did you place an original that is folded? Are the sub-address and passcode correct? (When using F-code communication)
Page 856: Problems Related To Reception
Problem Transmission does Is the machine's clock set to the correct not begin at the time? specified time. Is a transmission in progress? PROBLEMS RELATED TO RECEPTION Problem Printing does not take Does a message appear in the display place after reception. instructing you to add toner or paper? (Printing is not possible when this screen appears.)
Page 857: Problems Related To Telephone
Problem The machine does not Has the reception mode been set to begin fax reception. "Manual Reception" in the system settings? Is little free memory remaining? PROBLEMS RELATED TO TELEPHONE Problem Dialling is not Is the extension phone connected? possible. You cannot talk to the Did you dial using the speaker? other party.
Page 858 PROBLEMS RELATED TO ONE-TOUCH INDIVIDUAL KEYS / GROUP KEYS Problem A one-touch individual Has the maximum number of keys been key or group key stored? cannot be stored. Have functions been disabled by the administrator? A one-touch individual If the key is an individual key, is the key key or group key included in a group? cannot be edited or...
Page 859: Problems Related To One-Touch Individual Keys / Group Keys
SCANNING / INTERNET FAX PROBLEMS RELATED TO SCANNING / INTERNET FAX OPERATION • Transmission does not take place........... .8-38 •...
Page 860 Problem Transmission does Does the image file exceed the e-mail not take place. attachment limit set in the system settings (administrator)? Did the image file exceed the file attachment size limit of your mail server? (When Scan to E-mail is used.) Has the folder on the destination computer been set as a shared folder so that files can be sent to it?
Page 861 Problem Transmission takes a Is the resolution setting appropriate at long time. the time of scanning? A destination is Is "Default Address Setting" enabled in pre-selected. the system settings (administrator)? Cannot write to USB Is the connected USB device memory. recognized correctly? (When using USB Memory Scan.)
Page 862: Problems Related To Scan Results
PROBLEMS RELATED TO SCAN RESULTS Problem The scanned image is Is the original scan size setting smaller clipped. than the actual original size? The quality of the Is the original printed matter such as a scanned image is book or magazine? poor.
Page 863 Problem The scanned image is Are Internet fax or fax destinations black and white. included? JPEG was selected for Is the colour mode set to [Mono2]? the file type but the file was created as a TIFF file. The image is too light Is the threshold value suitable? or too dark.
Page 864 PROBLEMS RELATED TO ONE-TOUCH INDIVIDUAL KEYS / GROUP KEYS Problem A one-touch individual Has the maximum number of keys been key or group key stored? cannot be stored. Have functions been disabled by the administrator? A one-touch individual If the key is an individual key, is the key key or group key included in a group? cannot be edited or...
Page 865: Problems Related To Filing
DOCUMENT FILING PROBLEMS RELATED TO FILING • Document filing does not take place..........8-44 •...
Page 866: A Job Cannot Be Stored In A Custom Folder
Problem A job cannot be stored Do custom folders appear in "Folder in a custom folder. Information"? (When printing) Does the custom folder have a password? PROBLEMS RELATED TO FILE MANAGEMENT Problem A stored file has Did you touch the [Print and Delete the disappeared.
Page 867: A File Name Is Cut Off
Problem A file name is cut off. Was the file name stored in the advanced transmission settings during a scan or Internet fax transmission? Point to check If the name was stored in the advanced transmission settings before Quick File or File settings were configured, that name will be used for the stored file.
Page 868: General Problems
GENERAL PROBLEMS PROBLEMS RELATED TO MACHINE OPERATION • Specified machine functions cannot be used..........8-48 •...
Page 869: Problems Related To Machine Operation
PROBLEMS RELATED TO MACHINE OPERATION Problem Specified machine Have functions been disabled by the functions cannot be administrator? used. The operation panel Is the main power indicator lit? cannot be used. Did you just power on the machine? Is the [POWER SAVE] key ( blinking? Is a cover open or a device separated from the machine?
Page 870: Printing Is Not Possible Or Stops During A Job
Problem The operation panel Does the message "Call for service. cannot be used. Code:xx-xx*." appear in the touch panel? *Letters and numbers appear in xx-xx. Printing is not Is a tray out of paper? possible or stops during a job. Is the machine out of toner? Has a paper misfeed occurred? Is the output tray full?
Page 871: The Paper Misfeeds
Make sure that the stack of paper in the tray is not higher than the indicator line. Fan the paper well before loading it. Use SHARP-recommended paper. Using paper that is not supported may result in misfeeds, creases, or smudges.
Page 872: Paper Does Not Feed From The Paper Tray
Problem The paper misfeeds. Is A5 (5-1/2" x 8-1/2") size paper loaded? Has the correct paper size been set? Did you add paper to the bypass tray? Paper does not feed Is the paper loaded correctly in the from the paper tray. paper tray? In the Paper Tray Settings of the system settings, are restrictions placed on the...
Page 873: Problems Related To Quality / Print Results
Clean the surface of the bypass feed roller. ☞ 1. BEFORE USING THE MACHINE "MAINTENANCE" (page 1-69) Use SHARP-recommended paper. Using paper that is for other models or special paper that is not supported may result in misfeeds, creases, or smudges.
Page 874: Print Quality Is Poor
Problem Print quality is poor. Is "Toner Save Mode" enabled? Part of the image is Has the correct paper size been set? cut off. Was the original placed in the correct position? Printing takes place Is the paper loaded with the print side on the wrong side of facing in the correct direction? the paper.
Page 875: The Connected Usb Memory Cannot Be Used
Problem The connected USB Is the format of the USB memory memory cannot be FAT32? used. Are you using a USB memory with a capacity of more than 32 GB? The finisher / saddle Does a message appear indicating that stitch finisher does you need to remove paper from the not operate.
Page 876: Punching Does Not Take Place
Problem Punching does not Does a message appear instructing you take place. to check the punch module? Is a different size of paper mixed in? Is a paper size that cannot be punched included in the print job? Is the tray selected in the printer driver set to a paper type that cannot be punched? Have functions been disabled by the...
Page 877 Problem The inserter does not Are any inserter covers open? operate. "Disabling of inserter" is enabled in the administrator settings. A paper misfeed message appears. The [START] key light is not illuminated. Paper misfeed occurs The paper is curled or damp. A paper misfeed Do the size and orientation of the loaded occurs when paper is...
Page 878: Other Problems
OTHER PROBLEMS Problem Preview images or Are there a number of jobs waiting to be thumbnail images do executed? not appear. The touch panel Is the display contrast properly screen is difficult to adjusted? view. You were logged out Did Auto Clear activate? without having performed logout yourself.
Page 879 Operation Guide MODEL: MX-M623N MX-M753N MX-M623U MX-M753U SHAR~ SHARP CORPORATION MXM753N-EX-ZZ...

This manual is also suitable for:

Mx-m623u Mx-m753 Mx-m623n Mx-m753n

Sharp MX-M753U Operation Manual

Chapter 1 Before Using the Machine

Chapter 2 Copier

Chapter 3 Printer

Chapter 4 Facsimile

Quick Links

OPERATION GUIDE

Chapters

Troubleshooting

Related Manuals for Sharp MX-M753U

Summary of Contents for Sharp MX-M753U