hit counter script
Download
Share
Print this page
Sealey SA55.V2 Instructions
  1. Manuals
  2. Brands
  3. Sealey Manuals
  4. Power Tools
  5. SA55.V2
  6. Instructions
Sealey SA55.V2 Instructions

Sealey SA55.V2 Instructions

Air scissors
Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
 WARNING! Ensure Health & Safety, local authority and general workshop practice regulations
are adhered to when using this equipment.
 WARNING! Disconnect from air supply before changing accessories or servicing.
 Maintain the tool in good condition and replace any damaged or worn parts. Use
genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
 WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
 Wear approved safety eye/face shield, ear defenders and hand protection.
 Keep fingers clear of blades.
 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
 Keep children and non essential persons away from the working area.
 DO NOT use the tool for a task it is not designed to perform.
 WARNING! DO NOT use tool if damaged or thought to be faulty. Contact Sealey service agent.
 DO NOT use tool unless you have been instructed in its use by a qualified person.
 DO NOT carry the tool by the air hose, or yank the hose from the air supply.
 DO NOT operate tool if you are tired or under the influence of alcohol, drugs or intoxicating
medication.
 DO NOT carry tool with your hand on the power trigger in order to avoid unintentional starting.
 DO NOT direct air from the air hose at yourself or others.
 When not in use disconnect from air supply and store in a safe, dry, childproof location.
 WARNING: The warnings, cautions and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be understood
that common sense and caution are factors which cannot be built into this product, but must
be applied by the operator.
2.
INTRODUCTION & SPECIFICATION
Polished aluminium housing with textured grip handle. Suitable for accurately cutting metal sheet.
Unlike air shears this tool is ideal for trimming ragged sheet edges to gain a flat finish. Handle
exhaust helps reduce noise level.
Max. Cutting Capacity: 1.2mm(Steel) 1.5mm(Aluminium)
Air Consumption: . . . . . . . . . . . . . . . . . . . . . . . . . 4.3cfm
Operating Pressure: . . . . . . . . . . . . . . . . . . . . . . . . 90psi
Air Inlet Size: . . . . . . . . . . . . . . . . . . . . . . . . . . .1/4"BSP
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4kg
Replacement Blade Left: . . . . . . . . . . . . . . .SA55.V2-34
Replacement Cutter Right: . . . . . . . . . . . . . .SA55.V2-35
Noise Power: . . . . . . . . . . . . . . . . . . . . . . . . 96.53dB(A)
Noise Pressure: . . . . . . . . . . . . . . . . . . . . . . 85.53dB(A)
Vibration: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.78m/s²
Uncertainty: . . . . . . . . . . . . . . . . . . . . . . . . . 0.5868m/s²
© Jack Sealey Limited
INSTRUCTIONS FOR:
AIR SCISSORS
SA55.V2
MODEL No:
Original Language Version
SA55.V2
Issue: 2(SP) - 12/11/13

Advertisement

loading

Related Manuals for Sealey SA55.V2

Summary of Contents for Sealey SA55.V2

  • Page 1 SA55.V2 MODEL No: Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.

  • Page 2: Maintenance

    (31) off the gear case (27). Remove the two lock screws (32) that secure the blades (34, 35 and 37) and remove the blades. Fit new blades, ensuring the spacers (36) are correctly positioned and refit the lock screws. Original Language Version © Jack Sealey Limited SA55.V2 Issue: 2(SP) - 12/11/13...
  • Page 3 Slide the cutter housing onto the gear casing and secure using the lock screw. Tighten all three lock screws. 5.2. If the system does not have an oiler lubricate the tool daily with a few drops of Sealey air tool oil dripped into the air inlet. 5.3.
  • Page 4 WARNING! – Risk of Hand Arm Vibration Injury. This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately. This tool is subject to the vibration testing section of the Machinery Directive 2006/42/EC. This tool is to be operated in accordance with these instructions. Measured vibration emission value (a): 4.78 m/s²...
  • Page 5 PARTS FOR: AIR SCISSORS SA55.V2 MODEL: Issue: Issue Date: 200613 ITEM PART NO DESCRIPTION ITEM PART NO DESCRIPTION SA55.V2-01 HOUSING SA55.V2-20 FRONT END PLATE SA55.V2-02 TRIGGER PIN SA55.V2-21 WASHER SA55.V2-03 O-RING SA55.V2-22 PLANET GEAR SA55.V2-04 O-RING SA55.V2-23 GEAR PIN SA55.V2-05 O-RING SA55.V2-24...