Advertisement
Quick Links
WASHERINSTALLATION INSTRUCTIONS
Table of Contents
WASHER SAFETY............................................
1
INSTALLATIONREQUIREMENTS .................2
Teels and Par_s ............................................. 2
LocatienRequirements.................................2
Drain System ................................................. 3
Electrical Requirements................................3
INSTALLATION INSTRUCTIONS ...................4
Before You Star_............................................ 4
Remove Shipping Materials..........................4
Connect Drain Hose...................................... 5
Connect the Inlet Hoses ...............................6
Securethe Drain Hose..................................7
Level the Washer........................................... 7
Complete Installation .................................... 8
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow
instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
W10096749
Advertisement
Related Manuals for Whirlpool W10096749
Summary of Contents for Whirlpool W10096749
- Page 1 These words mean: All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. W10096749 Table of Contents WASHER SAFETY...
- Page 2 INSTALLATION REQUIREMENTS Gather the required tools and parts before starting installation. The parts supplied are in the washer basket. Tools needed for connecting the drain hose and water inlet hoses: • Pliersthat open to • Flashlight (optional) 3.95 cm (1%6") •...
- Page 3 Recessed area or closet installation The dimensions shown are for the recommended spacing allowed (A and B), except the closet door ventilation openings. The dimensions shown for the closet door ventilation openings (C) are the minimum required. 48.3 c_ (_9"I_LEZZZZZZ_ ===Z21 0 cm--_-= 68.6crn-_1,_...
- Page 4 • Donotearth toagaspipe. • Check w ithaqualified electrician ifyouarenotsure the washer isproperly earthed. • Donothave a fuse intheneutral orearth circuit. EARTHING INSTRUCTIONS For an earthed, cord-connected washer: This washer must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of electrical shock by providing a path of least resistance for electric current.
- Page 5 Looped power cord Looped power cord Firmly grasp the yellow shipping strap and pull until both ends are completely removed from washer. 2. Check that two (2) cotter pins were removed with the shipping strap. Proper connection of the drain hose protects your floors from damage due to water leakage.
- Page 6 The washer must b econnected tothewater faucets u sing t he new inlet h oses. Donotuse oldhoses. Insert new fiatwashers (supplied) into each end oftheinlet h oses. Firmly s eat t hewashers inthecouplings. A. Coupling B. Washer Connect the inlet hoses to the water faucets Make sure the washer basket is empty.
- Page 7 1. Remove theshipping s trap from thepower cord. D rape t he power cordover t heconsole. 2. Remove anycardboard used tomove washer• CC> Beaded tie strap Wrap the drain hose to the laundry tub leg or drain standpipe with the beaded tie strap. Push fastener into the nearest hole in the beaded tie strap.
- Page 8 IMPORTANT: If the nuts are not tight against the washer cabinet, the washer may vibrate. W10096749 © 2006 Whirlpool Corporation. Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended method. See "Electrical Requirements."...