Advertisement
Quick Links
Storage Box Kit
Workman
Model No. 07156
This product contains a chemical or chemicals known to the State of California to
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
Note: Determine the left and right sides of the machine from the normal operating position.
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
GTX Series Utility Vehicles
Proposition 65 Warning
cause cancer, birth defects, or reproductive harm.
Description
No parts required
Storage box
Hex-head screw (1/4 x 3/4 inch)
Spacer
Flange nut (1/4 inch)
Hex-head screw (5/16 x 1 inch)
No parts required
Register at www.Toro.com.
WARNING
CALIFORNIA
Qty.
–
1
2
2
2
1
–
Form No. 3402-381 Rev B
Installation Instructions
Use
Prepare the machine.
Install the storage box.
Connect the battery.
Original Instructions (EN)
All Rights Reserved *3402-381* B
Printed in the USA
Advertisement
Related Manuals for Toro 07156
Summary of Contents for Toro 07156
- Page 1 Form No. 3402-381 Rev B Storage Box Kit Workman ® GTX Series Utility Vehicles Model No. 07156 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
- Page 2 Preparing the Machine Installing the Storage Box No Parts Required Parts needed for this procedure: Storage box For Gasoline GTX Vehicles Hex-head screw (1/4 x 3/4 inch) 1. Park the machine on a level surface, set the parking Spacer brake, shut off the engine, and remove the key. Flange nut (1/4 inch) 2.
- Page 3 Figure 1 1. Hex-head screw (5/16 x 1 inch) 5. Support plate 2. Hex-head screw (1/4 x 3/4 inch) 6. Right, front shock-mount bracket 3. Storage box 7. Shock-support bracket 4. Spacer 8. Flange nut (1/4 inch)
- Page 4 Connecting the Battery No Parts Required For Gasoline GTX Vehicles Connect the negative battery cable; refer to your Operator’s Manual. For Electric GTX Vehicles Connect the main negative battery cable (black) that connects the bank of batteries to the ground point of the machine; refer to your Operator’s Manual.