Epson
SureColor
®
Start Here
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User's Guide.
Choose a Location for the Printer
Choose a location for the printer that is near a wall outlet where the power cord
can be easily unplugged. Avoid places subject to rapid changes in temperature
and humidity. Also keep the printer away from direct sunlight, strong light, or
heat sources.
Make sure to place the printer on a flat, stable surface with enough space on all
sides (see illustration below). The surface supporting the printer should be wider
than the space between the rubber feet on the bottom of the printer and capable
of supporting the weights shown below.
1.97 in.
(50 mm)
W
Weight: 63.93 lbs (29 kg)
Unpack
1
Make sure you have these items:
Printer and roll spindle
Note:
•
See the online User's Guide for instructions on using the output tray and
assembling the optional stand and paper basket.
•
Do not open the ink bottles until you are ready to fill the ink tanks. The ink
bottles are vacuum packed to maintain reliability.
WARNING:
The printer requires two people to lift and move it. Make sure to
grip the printer as shown in the illustration.
Caution:
Do not hold the printer by its paper support.
F570
®
5.9 in.
(150 mm)
H
12.20 in.
(310 mm)
D
1.57 in.
(40 mm)
Power cord
Ink bottles
Output tray
Limited warranty
2
Remove the plastic sheet and all tape from the outside of the printer.
3
Open the left cover.
4
Remove the tape and the protective piece.
5
Close the left cover.
6
Open the front cover.
7
Turn and remove the protective piece.
8
Close the front cover.
9
Remove the protective film from the control panel.
Note:
The touch screen will not operate if you do not remove the
protective film.