Handset Beeps Continuously While In The Charger; Handset Screen Displays "Searching - Cisco IP DECT 6800Series User Manual
Hide thumbs
Also See for IP DECT 6800Series:
- Administration manual (358 pages) ,
- User manual (222 pages) ,
- Provisioning manual (104 pages)
Table of Contents
Advertisement
Troubleshooting
Handset Beeps Continuously While in the Charger
Problem
The handset beeps continuously when placed in the charger.
Solution
Check these scenarios:
• The handset wasn't placed in the charger so that the contacts on the handset and charger touched.
• The handset is new and this is the first time it has been placed on the charger. Check that the plastic on
If none of the scenarios apply, the battery may be defective. Put a battery that you know works into the handset
and place the handset in the charger. If the handset doesn't beep, then the original battery is defective.
Handset Screen Displays "Searching"
Problem
The handset displays the message Searching.
Cause
The handset is too far from the closest base station or the base station isn't active.
Solution
• If the handset has been stationary, the base station may be rebooting or inactive.
• If the handset has been carried around, it may be out of range of the base station.
the battery has been removed.
1. Wait a couple of minutes to see if the handset can communicate with the base station.
2. If the problem persists, check that the base station has power and the LED is green. If the handset
power was off while searching for the base station, it takes more time to register after the handset
power is on.
• Short term solution: Move the handset closer to the base station.
• Long term solution for system with one multi-cell base station: Add additional 210 Multi-Cell Base
Stations or repeaters to improve coverage.
• Long term solution for multicell system: Add one or more 210 Multi-Cell Base Stations or repeaters
to improve coverage.
Handset Beeps Continuously While in the Charger
Cisco IP DECT 6800 Series User Guide
93
- Quick Links:
- Automatic Handset Configuration
Hide quick links:
Advertisement
Table of Contents
