Page 1
*-*’ *x ,*_ Control Power Saving . _, 1 Control Built-In Defrost Drain (Not Shown) Basket ’ Signal 1 ” Light Model Number Serial Number Purchase/Installation Date Service Company Telephone UPRIGHT FREEZER Model EV200D(K Model and Serial Number Plate XI” Number...
Before you plug it in Before using your freezer, you are personally responsible for making sure that il. is installed leveled on a floor that will hold the weight, and in an area suitable its size and use. is connected only to the right kind of outlet, with right...
1. Unplug power 2. Remove base grille. See page4. immediately 3. Unplug burned of same wattage ordered from your WHIRLPOOL dealer, 530584. from 4. Replace base grille. See page 5. Plug power cord into outlet. is first started the compressor...
Page 4
The lock loaded so the key cannot be left in the lock. lfthe key is lost, contact your WHIRLPOOL dealer for a replacement. Always give model and serial number of your freezer...
Page 5
Cleaning your freezer This freezer should be cleaned when frost has built up to about % inch (6 mm] thickness. plete defrosting and cleaning should least once a year, In high humidity areas, a freezer may need more frequent defrosting. To clean: 1.
See booklet, Modern Way with Your WHIRLPOOL for complete information freezing. loading... 1. Before freezing turn Cold Control let freezer operate about 2.
Page 7
3. Add more unfrozen food after first load frozen (approximately 18 to 24 hours). 4. After all food is frozen, return Cold Control to the usual setting Storing frozen food... After food is frozen, stack packages where in the freezer. Packages should extend...
Remember...Your tative is specially into the and servicing of your WHIRLPOOL appliances. can help you maintain into your WHIRLPOOL appliance. failure the time, now, to look up his telephone jot it down cover.