Safety Recommendations; Recommended Materials - Cisco ONS 15454 Unpacking And Installing
Four-shelf and zero-shelf bay assembly
Hide thumbs
Also See for ONS 15454:
- Hardware installation manual (516 pages) ,
- Troubleshooting manual (107 pages) ,
- Manual (88 pages)
Advertisement
Safety Recommendations
Safety Recommendations
The following guidelines will help to ensure your safety and protect the equipment. This list does not
include every potentially hazardous situation.
•
•
•
•
•
•
Recommended Materials
Because most of the installation is complete when you receive the system, the Bay Assembly requires
little installation material. The most significant tasks are removing the packaging from the Bay
Assembly and removing the Bay Assembly from the shipping pallet. Because the actual installation of
the Bay Assembly in each facility is done according to local site practice, your material needs may vary.
Cisco recommends that you have the following items on hand for installation:
•
•
•
•
•
•
•
Unpacking and Installing the Cisco ONS 15454 Four-Shelf and Zero-Shelf Bay Assembly
2
Never attempt to lift an object that might be too heavy for you to lift by yourself.
Always disconnect the power source and unplug all power cables before installing or removing the
Bay Assembly.
Carefully examine your work area for possible hazards such as moist floors, ungrounded power
extension cables, and missing power grounds.
When using equipment such as a safety hand truck, pallet jack, or forklift to move the Bay Assembly
to another location, use only moving equipment that is capable of preventing the Bay Assembly from
tipping.
Do not wear loose clothing, jewelry (including rings and chains), or other items that could get caught
in the Bay Assembly.
Do not work alone if potentially hazardous conditions exist.
A pallet jack to move the packaged Bay Assembly to the unpacking/staging area
A pair of scissors to cut the plastic banding on the shipping container
A safety hand truck with retractable safety leg wheels and a safety strap
Utility blankets or their equivalent to protect the Bay Assembly while on the hand truck
Phillips screw driver or cordless drill with Phillips bit
3/4 in. (19 mm) socket or box-end wrench for the earthquake floor bolts
Four optional kits listed in
Table 2 on page 33
that can be ordered separately
78-13271-05
Advertisement
