Chassis - Bezel Side; Chassis - Internal; Hardware Features - Standard - Cisco 5100 Series Hardware Installation Manual

Enterprise network compute system

Hide thumbs Also See for 5100 Series:

Table of Contents

Chassis - Bezel Side

Figure 2: Bezel View of the Cisco 5100 ENCS

Figure 3: Internal View of the Cisco 5100 ENCS

• USB 3.0 port: You can use this port to connect a mouse, keyboard, or any other USB device. Using a

• Ethernet management port for CPU: Use this port to connect to the CPU in your device.

• Front panel Gigabit Ethernet ports: There are a set of two dual ports GE0-0 and GE0-1. For those

Cisco 5100 Enterprise Network Compute System Hardware Installation Guide

USB

Front panel Gigabit Ethernet ports GE0-3

USB hub, you can connect more than one USB device to this port. Because this port is backward

compatible, you can also use an older version of USB devices on this port.

RJ45 ports, there is a corresponding fiber optic port. At a given time, the user can use either the RJ45

connection or the corresponding fiber optic port. There are a set of two copper ports GE0-2 and GE0-3.

Those two ports support copper RJ45 only.

Warning

For connections outside the building where the equipment is installed, the

following ports must be connected through an approved network termination unit

with integral circuit protection: Gigabit Ethernet (GE). Statement 1044.

Overview of the Cisco 5100 Enterprise Network Compute System

LEDs for front panel Gigabit Ethernet ports

Serial console port

Table of Contents