Chapter 4: Engine; Service And Repairs; Air Cleaner Assembly - Toro ProLine H800 Service Manual
Hide thumbs
Also See for ProLine H800:
- Operator's manual (92 pages) ,
- Setup instructions (8 pages) ,
- Installation instructions (4 pages)
Table of Contents
Advertisement
Service and Repairs
Air Cleaner Assembly
g288944
1.
Clamp
2.
90º Hose
3.
U-Bolt
4.
Air cleaner hose
5.
Engine
6.
Bracket
Removing the Air Cleaner Assembly
ProLine H800
19241SL Rev A
7.
Washer
8.
Bolt
9.
Washer
10.
Nut
11.
Hose
12.
Air cleaner
1. Park the machine on a level surface, lower the cutting deck, stop the engine,
engage the parking brake and remove the key from the key switch.
2. Raise and lock the hopper assembly; refer to Operator's Manual.
3. Get the access to air cleaner components.
4. Remove the air cleaner components as necessary
5. Refer to Operator's Manual for air cleaner service and maintenance
procedures.
6. Examine the air cleaner assembly (item 12 in
damage that could cause possible air leaks.
7. Examine the air hoses for wear or damage and replace the hoses if
necessary.
Figure 11
13.
14.
15.
16.
17.
Page 4–3
Air cleaner indicator
Prefilter
Nut
Clamp
Bolt
(Figure
11).
Figure
11) for wear and
Engine: Service and Repairs
Hide quick links:
Advertisement
Chapters
Table of Contents
