Disable / Enable - User Option - Honeywell NOTIFIER ID61 Operating Manual
Hide thumbs
Also See for NOTIFIER ID61:
Table of Contents
Advertisement
2
997-458-000-8, Issue 8
January 2010
ID61/62 Series Panel - Operating Manual
4.10 DISABLE / ENABLE - User Option
This option allows the user to disable or enable (depending
on their current state) the following parts of the system:
a. Zone (Device or Full Zone)
b. Outputs
c. Day Mode
d. Delays
To display the DISABLE/ENABLE menu:
1 At the 'Status: NORMAL' message, press the '
button. The LCD prompts for a Level 2/3 access code.
ACCESS TO MENUS RESTRICTED
Enter Level 2/3 Passcode: . . . .
2 Either turn the keyswitch or, using the numeric keypad,
enter the correct Level 2 access code and confirm
using the '
displays the user number ([U0] to [U9]) in the top left-
hand corner.
Note: An incorrect access code causes the LCD to
[U0] 1 : Test
2 : Disable/Enable
4 : View Mode
3 Using the numeric keypad, press the '
display the DISABLE / ENABLE menu.
[U0 Disable/Enable]
1:Zone
3:Day Mode
28
< : BackSp
' button to display the menu. The LCD
5
display the 'ERROR - INCORRECT PASSCODE'
message. After one minute the LCD returns to the
'Status: NORMAL' message.
3 : Clock
5 : Commission
6:Print
2:Outputs
4:Delays
'
' button to
2
Hide quick links:
Advertisement
Table of Contents
