Table of Contents
Advertisement
Wired Headsets
A wired headset works with all Cisco IP Phone features, including the Volume and Mute
buttons. These buttons adjust the earpiece volume and mute the audio from the headset
microphone.
When you install a wired headset, make sure you press the cable into the channel in the phone.
Failure to press the cable into the channel in the phone can lead to cable damage.
Wireless Headsets
You can use most wireless headsets with your phone. For a list of supported wireless headsets,
see
http://www.cisco.com/c/en/us/products/unified-
communications/uc_endpoints_accessories.html.
Refer to your wireless headset documentation for information about connecting the headset and
using the features.
Standard Headsets
You can use a standard headset with your desk phone. Standard headsets plug into the back of
the phone with an RJ-type connecter.
Connect a Standard Headset
Standard headsets plug into the back of the phone.
Figure 8.
1.
Plug the headset into the jack on the back of the phone and press the cable into
the cable channel.
Caution: Failure to press the cable into the channel in the phone can
damage the printed circuit board inside the phone. The cable channel
reduces the strain on the connector and the printed circuit board.
Cisco IP Phone 8841/8851 Multiplatform Phones User Guide
Standard Headset Connection
Wired Headsets
68
Hide quick links:
Advertisement
Table of Contents
