Cisco IE 3010 Installation Instructions Manual page 29
Hide thumbs
Also See for IE 3010:
- Hardware installation manual (98 pages) ,
- Getting started manual (27 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
Switch Installation
Connecting Devices to the Ethernet Ports
If auto-MDIX is disabled, use the guidelines in
Ethernet ports to other devices. See the
descriptions. See
Figure 35 on page
Figure 35
Connecting to an Ethernet Port
Table 11
Ethernet Cables (Auto-MDIX Disabled)
Device
Switch to switch
Switch to hub
Switch to computer or server
Switch to router
Switch to IP phone
1.
100BASE-TX and 1000BASE-T traffic requires twisted four-pair, CAT5, CAT5e, or CAT6 cable. 10BASE-T traffic
uses Category 3 or Category 4 cable.
Connecting to the 10/100 PoE Ports
The Cisco IE-3010-16S-8PC switch 10/100 PoE ports have the same autonegotiation settings and cabling requirements
as those in the
Connecting to the 10/100 and 10/100/1000 Ports, page
See the
PoE Ports, page 7
The ports provide PoE support for devices compliant with IEEE 802.3af and also provide Cisco prestandard PoE support
for Cisco IP Phones and Cisco Aironet Access Points.
On a per-port basis, you can control whether or not a port automatically provides power to a connected IP phone or an
access point.
To access an advanced PoE planning tool, use the Cisco Power Calculator on Cisco.com:
http://tools.cisco.com/cpc/launch.jsp
You can use this application to calculate the power supply requirements for a specific PoE configuration. The results show
output current, output power, and heat dissipation.
Warning:
Voltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if interconnections
are made using uninsulated exposed metal contacts, conductors, or terminals. Avoid using such interconnection
methods, unless the exposed metal parts are located within a restricted access location and users and service
Table 11 on page 45
Connector and Cable Specifications, page 71
45.
Crossover Cable
Yes
Yes
No
No
No
for information on the cables and connectors.
to select the cable for connecting the 10/100/1000
1
Straight-Through Cable
No
No
Yes
Yes
Yes
44. These ports provide PoE power.
45
appendix for cable-pinout
1
Advertisement
Table of Contents
