Table of Contents
Advertisement
Instruction Manual
9-Inch Wide VGA Private Monitor
TVM - PW910T
Installation in vehicle should always be carried out properly based on this "Safety Precautions". Do not use
methods of installation or components that are not specified here, as they may cause accident or injury. In
such case, the company shall not be responsible.
To all dealers
After connection and installation, please pass this booklet to the customer.
※For connection and installation of optional items, please refer to the manual that comes with the optional item.
■ When using the product, always read the "Safety Precautions". Not observing the precautions on safety may
endanger the user or others or cause property damage.
■ This manual contains important precautions in handling the product and in preventing accident.
Please read it carefully and use it safely.
■ Please fill in the "Date of purchase and the name of the shop" in the warranty card and keep it properly.
The contents stated in this manual may change without notice.
Duplicating this manual without permission is strictly prohibited.
Advertisement
Table of Contents
Related Manuals for Pioneer TVM-PW910T
Summary of Contents for Pioneer TVM-PW910T
- Page 1 Instruction Manual 9-Inch Wide VGA Private Monitor TVM - PW910T Installation in vehicle should always be carried out properly based on this “Safety Precautions”. Do not use methods of installation or components that are not specified here, as they may cause accident or injury. In such case, the company shall not be responsible.
-
Page 2: Table Of Contents
C o n t e n t s Introduction How to connect Safety precautions ........... 3 Before connecting ~what you should know~..24 Notes on using the device ........7 Power and AV interface cable connection .... 25 Things to observe .......... -
Page 3: Safety Precautions
Introduction Safety precautions Always observe these safety precautions to avoid physical injury and property damage. ■ Neglecting or misusing the description on the display may result in the following degrees of danger and damage: Death or serious injury may occur Warning Precaution Light injury or damage to property may occur... - Page 4 Safety precautions (Continued) Warning Warning Mandatory Mandatory When changing the installation, wiring or the Secure the cord so that it does not obstruct driving location, always consult the dealer for safety. ・ If it is caught by the steering wheel, selection bar ・...
- Page 5 Safety precautions (Continued) Method of Use Precaution Warning Prohibited Prohibited The cord should not come in contact with the high temperature parts of the car body The driver should not operate this device while driving ・ May cause fire or electric shock. ・...
- Page 6 Safety precautions (Continued) During emergency Warning Warning No contact No contact Mandatory In case of lightning, do not touch the cord or the set ・There is risk of electric shock from lightning. In case of breakdown, stop using immediately, and always consult the dealer for service ∙...
-
Page 7: Notes On Using The Device
Notes on using the device Things to observe Do not use for long after the engine is off Notes on using the device ・ Using the device long after the engine has been ・ Using the device on non-DC12V vehicles (like turned OFF will consume battery power, which vessel) may cause damage. -
Page 8: Preparation
Preparation WARNING Request for experienced technician to perform the installation and wiring 取り付けや配線は専門業者にご依頼ください Installation and wiring require technicians with experience, please consult your ・取り付けや配線は、専門技術と経験が必要です。お買い dealer 上げの販売店にご相談ください。 To prevent electrical short circuit during installation, turn OFF the car power and remove the negative terminal of the battery After all installation and wiring work are done, the vehicle components that have been removed should be returned to their original location, then re-connect the negative terminal... -
Page 9: Description Of Each Part
Description of each part 【Top】 【Front】 Shaft guide 【Bottom】 Letter C-Bracket Cover Cover ⑥ LED screen ① W/MENU Button ⑦ External light sensor Switching of screen expansion （☞ Page12） The sensor that auto-adjusts the brightness of the 長く押す Press and hold screen to suit the surroundings, and turns the Display menu screen （☞... -
Page 10: Operation
Operation How to turn the power ON/OFF Start the car engine Precaution Always turn on the car engine to prevent wearing off the battery If the set was previsouly turned OFF manually… ■ When turning ON the power, press the SRC/PWR button When turning OFF the power…... -
Page 11: Switching Inputs
Switching inputs Connect the terrestrial digital tuner or DVD player, and two systems of input pictures (VIDEO/ HDMI) can be switched to and from and displayed. The switching of inputs works in the following manner: Press SRC/PWR button Press the button to switch between [Video], [HDMI]. ※... -
Page 12: Switching To Wide Mode
Switching to wide mode By selecting the mode that matches the input image, the user can enlarge the image to full screen. Press W/MENU button When pressed, the switching will be in the following manner: ［AUTO］→［FULL］→［JUST］→［CINEMA］→ ［ZOOM］→［NORMAL］ （→［FIT*］ ）→ Return to ［AUTO］... -
Page 13: Switching The Screen Brightness
Switching the screen brightness The device’s screen brightness can be adjusted, and dimmer function is available. In [AUTO] mode, the sensor will detect the brightness of the surrounding area and adjust the brightness automatically. Press DIM/ILL button When pressed, the switching will be in the following in the following manner: ［AUTO］→［Day time］→［Evening］→［Night time］→... -
Page 14: Settings
Settings Menu The menu of the device comprises the following. Menu item Set item Set value DYNAMIC MODE STANDARD CINEMA PICTURE（☞ Page 15） USER － 24 ～＋ 24 BRIGHTNESS － 24 ～＋ 24 CONTRAST － 24 ～＋ 24 COLOR － 24 ～＋ 24 －7 ～＋7 SHARPNESS －3 ～＋3... -
Page 15: Screen Setting
PICTURE Screen setting Mode DYNAMIC Brightness Contrast Color Press and hold the W/MENU Sharpness button Exit The menu screen will appear. Mode 「 Continue pressing the W/MENU Adjust to the screen quality that correspond to the image description to select [PICTURE] Emphasizes on the contrast to [PICTURE] menu will create a bright image... -
Page 16: Sound Setting
Sound setting Press and hold the W/MENU button SOUND The menu screen will appear. Treble ０ Bass ０ Exit Select [SOUND] using the VOL -/+ button, then press the W/MENU button Treble The [SOUND] menu will appear Set the intensity under treble Select the item to adjust using the －3 ～＋3 Set value... -
Page 17: Brightness Setting
Brightness setting Press and hold the W/MENU button The menu screen will appear. BRIGHTNESS Select the [BRIGHTNESS] using the VOL -/+ button, then press the Evening Night W/MENU button Exit BRIGHTNESS] menu will appear. Select the item to adjust using the 夜... -
Page 18: Illumination Setting
Illumination setting Operation setting Set the illumination The user can operate ON/OFF with DIM/ILL button, or set the ON/OFF according to the brightness of the surroundings. ON/OFF the DIM/ILL button ON/OFF by linking to the brightness of the surroundings regardless of Dimmer the operation of the DIM/ILL button (ON when dark) Press and hold the W/MENU button... -
Page 19: Brightness Setting
Illumination setting (continued) Brightness setting To set the brightness of the illumination. The brightness can be set in three levels [1. Dark, 2. Normal, and 3. Bright] Press and hold the W/MENU button The Menu screen will appear. Select [ILLUMINATION] using the VOL -/+ button, then press the W/MENU button The [ILLUMINATION] menu will appear. -
Page 20: Source Setting
Source setting When switching the source, the source name that appears on the top/left of the screen can be changed according to the type of the device connected. The names that can be set are as follows. Source Can be set to VIDEO ／... -
Page 21: Misc Settings
Misc settings HDMI-link setting The setting to validate/invalidate HDMI-Link function. HDMI-Link function is the function for more convenient use through linking the device to reproduction by connection to the HDMI terminal of the device and by power switching or auto-input switching. HDMI-Link function validated HDMI-Link function invalidated Note... -
Page 22: Logo Setting
Misc settings (continued) Logo setting The logo on the screen when switching the source without having connected (no source signal). Logo displayed Logo not displayed Press and hold the W/MENU button The menu screen will appear. Select [MISC] using the VOL -/+ button, then press W/MENU button [MISC] menu will appear. -
Page 23: Initialize Setting (Reset)
Initialize setting (reset) Reset the settings of the device to return to the factory settings. While the power of the device is turned OFF, SYSTEM press and hold the SRC/PWR while continuing to press the W/MENU button, RESET The power of the monitor will turn ON, and the system menu screen will appear. -
Page 24: Know
How to connect Before connecting - Understand these first Precautions during installation Damage Always use the specified optional components. Using unspecified components may damage the internal parts of the device; moreover, they may not be secured properly. These will result in the risk of removal. •... -
Page 25: Before Connecting ~What You Should Power And Av Interface Cable Connection
Connecting the power and AV interface cable Use the dedicated power and AV interface cable (accessories) to do the wiring and connection. For details on the connection, please consult the shop you bought from. To the power and AV Interface cable terminal Power and AV interface cable （accessories）... -
Page 26: Connect To The Hdmi Device
Connecting to the HDMI device Connect using the HDMI cable (not supplied). For details regarding the connection, consult the dealer. ※ HDMI cable is not supplied, and the user should buy dedicated HDMI cable. To HDMI input To HDMI output terminal terminal Terrestrial digital tuner,... -
Page 27: Install Monitor
Installing the monitor Precautions on installation ・ The device is a boot-mounted type. It cannot be used in vehicles with no boot, and cannot be used in vehicles with bucket seat or head-rest. ・ 。 In vehicles with special shafts, boots or seats, it may not be able to install the device ・... - Page 28 Installing the monitor (continued) Adjusting the shaft guide ■Shaft guide position (example) The width between the shaft guides should be 110mm~169mm for a car with shaft diameter less than 14mm. The narrowest The widest （110mm） （169mm） ■Removing the shaft ■Adjust, install guide Shaft guide (left) Pull up the nut of the...
- Page 29 Installing the monitor (continued) Remove the cover on the left of the fixture Cover ー Connect the power and AV interface cable Connect the power and AV interface cable connection of the accessories to its connector terminal. The cable is wired along the cable guide. Guide Connector Install the fixture to the shaft-boot of the headrest...
- Page 30 Installing the monitor (continued) Install the headrest onto the shaft guide’s hole, and insert back the boot If the shaft lock button is on the right, remove the cover on the right and press. Adjust the height of the headrest Push the shaft lock button from this gap using the...
-
Page 31: Check The Operation
Installing the monitor (continued) Check operation Once the connection and installation is complete, check if the device is functioning properly with the following procedure. Check the connection and installation again Check the connection and installation, ensure that they are not loosened or removed Start the car engine Reset the device... -
Page 32: Reference
Reference Main specifications Product name Model No: TVM-PW910T 9-Inch Wide VGA Private Monitor 239.5mm (W) × 143.0mm (H) × Device dimension (including 127.0mm (D) protrusion) (when the monitor is at 90°) Weight About 900 g Power/maximum current DC14.4V/1A Grounding Minus-earth system －... -
Page 33: Is It A Breakdown
Is it a breakdown? Before sending for repair, check the following again: In case Check the following Page • Is the engine ON, or is the ACC-ON turned on? There is no PICTURE • Have you pressed the SRC/PWR button of the device? and SOUND •... - Page 34 Is it a breakdown (continued) In case Check the following Page The PICTURE is too • Detect the surrounding brightness using the external light sensor bright or too dark 9, 13 installed at the front of the monitor, and auto-adjust the brightness (continued) to the optimum level using the DIMMER function provided.
- Page 35 Memo...
- Page 36 PIONEER CORPORATION 28-8, Honkomagome 2-chome, Bunkyo-ku, Tokyo 113-0021 Japan http://pioneer.jp/group/index-e.html PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 2 Jalan Kilang Barat, #07-01 Singapore 159346 Tel: 65-6378-7888 www. pioneer.com.sg U01UG589RZZ(0)