Table of Contents
Advertisement
Because invisible laser radiation may be emitted from the aperture of the port when no fiber cable is
Warning
connected, avoid exposure to laser radiation and do not stare into open apertures. Statement 125
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Statement 1001
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network
Warning
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Both
LAN and WAN ports may use RJ-45 connectors. Use caution when connecting cables. Statement 1021
Warning
Hazardous network voltages are present in WAN ports regardless of whether power to the router is
OFF or ON. To avoid electric shock, use caution when working near WAN ports. When detaching
cables, detach the end away from the router first. Statement 1026
Warning
Before opening the chassis, disconnect the telephone-network cables to avoid contact with
telephone-network voltages. Statement 1041
The telecommunications lines must be disconnected 1) before unplugging the main power connector
Warning
and/or 2) while the housing is open. Statement 1043
Software Requirements for the SM-X-NIM-ADPTR
Cisco IOS XE Release 3.14 or later release is required to operate the SM-X-NIM-ADPTRon a Cisco
ISR. To determine the version of Cisco IOS software that is running on your ISR, log in to the ISR, and
the enter the show version command:
Router> show version
Cisco IOS XE Software, Version 2014-07-08_20.33_ciscouser
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M),
Version 15.4(20140709:015327) [v154_3_s_xe313_throttle-ciscouser-xe313_0708 101]
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Tue 08-Jul-14 18:54 by ciscouser
Installing the SM-X-NIM-ADPTR
•
•
Connecting the Cisco Network Interface Module Adapter for SM-X Slot on Cisco 4300 and 4400 Series Integrated Services Routers
6
Connecting the Cisco Network Interface Module Adapter for SM-X Slot on the Cisco 4000 Seris Integrated Services
Installing the SM-X-NIM-ADPTR into a Cisco 4000 Series ISR, page 7
Verifying the SM-X-NIM-ADPTR Installation in a Cisco 4000 Series ISR, page 8
Hide quick links:
Advertisement
Table of Contents
