Profienergy - Siemens SIRIUS M200D Manual
Industrial controls, load feeders and motor starters, profibus / profinet
Hide thumbs
Also See for SIRIUS M200D:
- Operating instructions (4 pages) ,
- Manual (198 pages) ,
- Operating instructions (4 pages)
Table of Contents
Advertisement
Functions
3.21 PROFIenergy
Note
If the "CW rotation" and "CCW rotation" pushbuttons are pressed simultaneously, this is
classed as an operation fault. A function cannot be restarted. A function that is being
executed is interrupted (the starter shuts down).
A function cannot be restarted until both pushbuttons have been released.
Note
When the "CCW rotation" or "CW rotation" pushbuttons are actuated, a connected brake is
also always actuated.
3.21
PROFIenergy
3.21.1
What is PROFIenergy?
PROFIenergy (PE)
PROFIenergy (PE) supports the following two functions:
● PE_Energy_saving_function
Supports the purposeful tripping of loads during idle times.
● PE_Measured_value_function
Energy management is an instrument which is ideally suited to reducing energy
consumption and thereby energy costs within a company both systematically and on a
long term basis. The objective of an energy management system is to economically and
ecologically optimize the use of energy within a company, from the purchase of energy
through to energy consumption. The PE_Measured_value_function provides the
measured values required for optimization.
84
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
- Quick Links:
- Status Displays
- Diagnostics with Led
Hide quick links:
Advertisement
Table of Contents
