Table of Contents
Advertisement
Notes on the user guide
Base station power consumption
In standby mode: approx. 1.2 watt
During a call: approx. 1 watt
General specifications
WDCT standard
is supported
No. of channels
80 duplex channels
Radio frequency
range
2400–2483.5MHz
Duplex method
Time multiplex,
10 ms frame length
Bit rate
576 kbit/s
Modulation
GFSK
Transmission
25mW, average power per
power
channel
Range
up to 300 m outdoors,
up to 50 m indoors
Base station
power supply
230 V ~/50 Hz
Environmental
+5 °C to +45 °C;
conditions in oper-
20% to 75% humidity
ation
Dialling mode
DTMF (touch tone dial-
ling)/DP (dial pulsing)
Notes on the user guide
This section explains the meaning of cer-
tain typographical conventions that are
used in this user guide.
Example of a menu input
The steps you need to perform are shown
in abbreviated form in the user guide. This
is illustrated below using the example of
"Setting the contrast for the display". The
things you have to do are explained in the
boxes.
32
¢
¢
v
Ð
Display
¤
With the handset in idle status, press
on the right of the control key (v) to
open the main menu.
¤
Select the line
Settings
trol key q.
¤
Press v or press the display key
confirm the
Settings
The
submenu is displayed.
Settings
¤
Press on the bottom of control key q
repeatedly until the
tion is selected.
¤
Press v or press the display key
confirm the selection.
Contrast
Select and press
¤
Press on the bottom of control key q
repeatedly until the
function is selected.
¤
Press v or press the display key
confirm the selection.
r
Select contrast and press the
display key
¤
Press on the right or left of the control
key to set the contrast.
¤
Press the display key
the selection.
a
Press and hold (idle status).
¤
Press and hold the end call key until the
handset returns to idle status.
Example of multiple line input
In many situations you can change set-
tings or enter data in several lines of a dis-
play.
In this user guide icons are used to guide
you step by step through multiple line
input. This is illustrated below using the
example of "Setting the date and time".
using the con-
to
§OK§
function.
menu func-
Display
to
§OK§
.
§OK§
Contrast
menu
to
§OK§
.
§Save§
to confirm
§Save§
Advertisement
Table of Contents
