Table of Contents
Advertisement
Product Overview
Figure 5: Alarm Connector
1
NO Alarm Output Normally Open (NO) connection
2
NC Alarm Output Normally Closed (NC) connection
3
Alarm In
Console Management Port
You can connect the switch to a PC running Microsoft Windows or to a terminal server through the 5-pole
A-coded console port and configure it by using the CLI. The baud rate and format of the console port is:
• 9600 baud
• 8 data bits
• 1 stop bit
• No parity
• None (flow control)
Figure 6: Console Connector
1
RTS
2
CTS
3
TXD
Note
For specified cable, use Cisco Product CAB-CONSOLE-M12=
4
RXD
5
GND
Cisco Catalyst IE3400 Heavy Duty Series Hardware Installation Guide
Console Management Port
4
Alarm In Reference
5
COMMON Alarm Common connection
5
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
