hit counter script
Siemens SIMATIC LOGO! CMR2020 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Control Unit
  5. LOGO! CMR2020
  6. Operating instructions manual

Siemens SIMATIC LOGO! CMR2020 Operating Instructions Manual

Hide thumbs Also See for SIMATIC LOGO! CMR2020:
Table of Contents

Advertisement

Quick Links

LOGO! CMR2020 / LOGO! CMR2040
SIMATIC NET
LOGO! - Industrial Ethernet
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions
09/2014
C79000-G8976-C356-01
___________________
Preface
___________________
Properties and functions
___________________
Connectors and LED display
___________________
Requirements for use
___________________
Installation, connecting up,
commissioning
___________________
Application examples
___________________
Configuration
___________________
Operation
___________________
Dimension drawings
___________________
Accessories
___________________
Technical specifications
___________________
Approvals
___________________
Documentation references
1
2
3
4
5
6
7
8
9
10
11
A

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMATIC LOGO! CMR2020

Summary of Contents for Siemens SIMATIC LOGO! CMR2020

  • Page 1 ___________________ LOGO! CMR2020 / LOGO! CMR2040 Preface ___________________ Properties and functions ___________________ SIMATIC NET Connectors and LED display ___________________ Requirements for use LOGO! - Industrial Ethernet LOGO! CMR2020 / LOGO! CMR2040 ___________________ Installation, connecting up, commissioning ___________________ Application examples Operating Instructions ___________________ Configuration ___________________...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Preface

    Preface Validity of this manual This document contains information on the following LOGO! products: ● LOGO! CMR2020 Hardware version ≥ 1 Firmware version ≥ V1.0 Article number: 6GK7 142-7BX00-0AX0 ● LOGO! CMR2040 (available as of 12/2014) Hardware version ≥ 1 Firmware version ≥...
  • Page 4 A detailed example (Page 114) supports you during commissioning. Current manual release on the Internet You will also find the current version of this manual on the Internet pages of Siemens Industry Online Support under the following entry ID: 91689511 (http://support.automation.siemens.com/WW/view/en/91689511) >...
  • Page 5 Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept.
  • Page 6 In addition to the product documentation, the comprehensive online information platform of Siemens Automation Customer Support supports at any time and at any location in the world. You will find the Service & Support pages on the Internet at the following address: (www.siemens.com/automation/service&support)
  • Page 7 Preface SITRAIN - Siemens training for automation and industrial solutions With over 300 different courses, SITRAIN covers the entire Siemens product and system spectrum in the field of automation and drive technology. Apart from the classic range of courses, we also offer training tailored for individual needs and a combination of different teaching media and sequences, for example self-learning programs on CD-ROM or on the Internet.
  • Page 8 Preface LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...

  • Page 9: Table Of Contents

    Table of contents Preface ..............................3 Properties and functions........................13 Connection using mobile wireless, Internet and GPS ............13 Configuration and functions ....................14 Connectors and LED display ......................... 17 Appearance of the device ....................... 17 Interfaces ..........................18 LEDs to display operation ....................... 19 Requirements for use ..........................
  • Page 10 Table of contents 6.4.1 Calling the Web page ......................55 6.4.2 General ..........................56 6.4.3 Hardware information ......................57 6.4.4 System time ........................... 58 Diagnostics ..........................62 6.5.1 Calling the Web page ......................62 6.5.2 Diagnostics buffer ........................62 6.5.3 SMS notifications ........................
  • Page 11 Table of contents 7.2.11 Example of a monitoring configuration ................. 114 SMS message structures and examples ................119 7.3.1 Response of the CMR when receiving an SMS message/replying to SMS message ..119 7.3.2 SMS error messages ......................121 7.3.3 Syntax of all SMS commands ....................
  • Page 12 Table of contents LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...

  • Page 13: Properties And Functions

    Properties and functions Connection using mobile wireless, Internet and GPS Wireless connection via the mobile wireless network With the CMR, you establish a mobile data connection to a mobile wireless network: LTE, UMTS or GSM/GPRS mobile wireless network. You are also in a position to connect the CMR to a GPS system.

  • Page 14: Configuration And Functions

    Properties and functions 1.2 Configuration and functions You can also operate the CMR in stand-alone mode: in other words without a connected BM. To connect the I/O you use the two inputs and outputs of the CMR. Requirements for operation Mobile wireless network within reach ●...
  • Page 15 Properties and functions 1.2 Configuration and functions Functions The CMR supports the following basic functions: 1. Web user interface (WBM) for the configuration; protected with login and password query. 2. Cyclic reading of the process image from the BM. 3. From incoming events, events coming from the process or internal, suitable output reactions configured using WBM are generated: For example sending an alarm SMS message.
  • Page 16 Properties and functions 1.2 Configuration and functions Diagnostics via the local area network Using WBM you can view a diagnostics buffer for diagnostics purposes. Is also possible to download and save the diagnostics buffer on an SD card or PC. The following are logged, for example: ●...

  • Page 17: Connectors And Led Display

    Connectors and LED display Appearance of the device Operator control/connector and display elements of the CMR Element Function X10 (L+, M) Power supply connector Service button SET, refer to the section "Functions of the SET button" XR01 GPS antenna connector XR02 Mobile wireless antenna connector LED "L"...

  • Page 18: Interfaces

    Connectors and LED display 2.2 Interfaces Element Function Ground Output 2 connector X1P1 LAN connector Functions of the SET button The SET button has different functions depending on how long you press it. Operator input Function Keep pressed for 5 s Restart Keep pressed for 5 to 10 sec- Shutting down the device to a safe status:...

  • Page 19: Leds To Display Operation

    Connectors and LED display 2.3 LEDs to display operation LEDs to display operation The LEDs on the CMR provide information about the operating status of the device and the two inputs/outputs. LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...
  • Page 20 Connectors and LED display 2.3 LEDs to display operation Meaning of the LEDs Status Meaning All LEDs Flashing Fatal error Firmware being updated Not lit No voltage present or applied • Device shut down • No external power supply connected Power supply Power supply connected Flashing...
  • Page 21 Connectors and LED display 2.3 LEDs to display operation Status Meaning Flashing Duplicate IP address detected. Ethernet interface unreacha- ble. U < 5 V Input 1 Lit green U > 8.5 V U < 5 V Input 2 Lit green U >...
  • Page 22 Connectors and LED display 2.3 LEDs to display operation LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...

  • Page 23: Requirements For Use

    Requirements for use Antennas To operate the CMR, you require an antenna that is tuned to the frequency bands of the mobile wireless provider you have selected. ● For GSM/GPRS transmission (LOGO! CMR2020): – 850 MHz, 900 MHz, 1800 MHz or 1900 MHz; quad-band ●...
  • Page 24 Requirements for use SIM card You require a SIM card of your mobile wireless provider with the corresponding PIN (Personal Identification Number). Exception: SIM cards that are only used for the data service can be used without a PIN. Only necessary if NTP is used: ●...

  • Page 25: Installation, Connecting Up, Commissioning

    Installation, connecting up, commissioning Safety notices on the use of the device The following safety notices must be adhered to when setting up and operating the device and during all associated work such as installation, connecting up or replacing devices. WARNING Safety extra low voltage The equipment is designed for operation with Safety Extra-Low Voltage (SELV) by a...

  • Page 26: Power Supply

    Installation, connecting up, commissioning 4.1 Power supply Overvoltage protection NOTICE Protection of the external power supply If power is supplied to the module or station over longer power cables or networks, the coupling in of strong electromagnetic pulses onto the power supply cables is possible. This can be caused, for example by lightning strikes or switching of higher loads.
  • Page 27 Installation, connecting up, commissioning 4.1 Power supply The CMR operates with a DC voltage of 12 to 24 VDC, nominally 24 VDC. The nominal current consumption is a maximum of 250 mA at 12 V. ● Connect a suitable power supply to the screw terminals. ●...

  • Page 28: X1P1 (Lan) Interface

    Installation, connecting up, commissioning 4.2 X1P1 (LAN) interface X1P1 (LAN) interface Connecting the X1P1 (LAN) interface The interface supports autonegotiation and autocrossing. For the connection, use a patch cable with an RJ-45 plug. You will find the properties of the X1P1 interface in the technical specifications.

  • Page 29: Sma Antenna Sockets

    Installation, connecting up, commissioning 4.3 SMA antenna sockets SMA antenna sockets WARNING Risk of lightning strikes when installed outdoors If you install an antenna outside, you need to ground the antenna to protect it from lightning strikes. This work must only be carried out by qualified personnel. NOTICE Damage to devices due to incorrect accessories Select the antenna suitable for your frequency band from the accessories.

  • Page 30: Mounting

    Installation, connecting up, commissioning 4.5 Mounting Mounting The CMR is suitable for rail mounting on a 35 mm DIN EN 50 022 rail. On the rear of the device there is a locking mechanism with a spring catch. Installing on a DIN rail / removing from a DIN rail Figure 4-1 Installing on a DIN rail / removing from a DIN rail LOGO! CMR2020 / LOGO! CMR2040...
  • Page 31 Installation, connecting up, commissioning 4.5 Mounting Mounting To mount the CMR on a DIN rail, follow the steps below: ① 1. Fit the upper part of the locking mechanism of the device on to the DIN rail. ② 2. Press the device down against the DIN rail until the spring catch locks in place.

  • Page 32: Steps In Commissioning

    Installation, connecting up, commissioning 4.6 Steps in commissioning Steps in commissioning To commission the CMR, follow the steps below: Overview of commissioning 1. Note the requirements for operating the CMR, refer to the section Requirements for use (Page 23). 2. SIM card: Before you insert the SIM card, note the information in Insert the SIM card and enter the PIN (Page 33) regarding the two different methods: –...

  • Page 33: Insert The Sim Card And Enter The Pin

    Installation, connecting up, commissioning 4.7 Insert the SIM card and enter the PIN Insert the SIM card and enter the PIN NOTICE Disconnecting the CMR from the power supply before inserting or removing the SIM card Do not remove the SIM card during operation. 1.
  • Page 34 Installation, connecting up, commissioning 4.7 Insert the SIM card and enter the PIN 6. Restart the CMR by connecting up the power supply. 7. In the WBM, in "WAN", "Mobile wireless settings" tab, select the "Activate mobile wireless interface" check box: The mobile wireless interface is once again ready for operation.

  • Page 35: Inserting The Micro Sd Card

    Installation, connecting up, commissioning 4.8 Inserting the micro SD card Inserting the micro SD card Figure 4-3 Slot for the micro SD card (yellow rectangle) The CMR supports all normal commercially available micro SD cards. NOTICE Do not remove/insert an SD card during operation You can only remove or insert the SD card when the CMR is turned off/shut down.

  • Page 36: Connecting Up The Inputs And Outputs

    Installation, connecting up, commissioning 4.9 Connecting up the inputs and outputs Connecting up the inputs and outputs Refer to the technical specifications for the load capabilities of the inputs and outputs. Ideally, use a debounced switch to connect to a LOGO! CMR input. LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...

  • Page 37: Application Examples

    Application examples Requirement The following applies to all application examples: 1. First familiarize yourself with the safety notices. 2. Put the CMR into operation as described in the section Installation, connecting up, commissioning (Page 25). Possible applications The CMR has a wide variety of possible uses in various areas of application. In this section, you will find configuration examples and use cases for the following: ●...

  • Page 38: Mobile Wireless Communication Without Logo! Bm

    Application examples 5.1 Mobile wireless communication without LOGO! BM Mobile wireless communication without LOGO! BM Figure 5-1 Mobile wireless communication without LOGO! BM You can operate the CMR without a BM being connected. If the CMR is connected to a mobile wireless antenna, the following functions are available: ●...

  • Page 39: Mobile Wireless Communication With Logo! Bm

    Application examples 5.2 Mobile wireless communication with LOGO! BM Procedure To configure access via the mobile wireless network, follow the steps below: 1. First establish a configuration connection between the CMR and a connected PC. To do this, use an Ethernet patch cable. See Establishing a connection to the CMR (Page 49) 2.
  • Page 40 Application examples 5.2 Mobile wireless communication with LOGO! BM If the CMR is connected to the BM, and if you have a mobile wireless antenna connected, you can use all the functions available in operation without a connected BM. In addition to this, access to the LOGO! BM is expanded: ●...

  • Page 41: Position Detection (Gps)

    Application examples 5.3 Position detection (GPS) Position detection (GPS) Figure 5-3 Position detection (GPS) The CMR is equipped with a GPS interface via which the position data of the LOGO! station can be determined. If a GPS antenna is connected to the GPS interface, the following functions are available to you: ●...
  • Page 42 Application examples 5.3 Position detection (GPS) Requirements 1. Installation, connecting up, commissioning (Page 25) completed. 2. Antenna for mobile wireless reception connected. If only position detection using GPS is required, the mobile wireless antenna does not need to be connected. You only require a connected mobile wireless antenna when data is forwarded using SMS messages.

  • Page 43: Time-Of-Day Synchronization

    Application examples 5.4 Time-of-day synchronization Time-of-day synchronization Time-of-day synchronization for the CMR can be configured using three time-of-day synchronization methods. The time-of-day synchronization method is set in the configuration on the "System" page in the "System time" (Page 58) tab: ●...
  • Page 44 Application examples 5.4 Time-of-day synchronization Figure 5-4 Time-of-day synchronization The LOGO! CMR provides the option of obtaining the time of day from the following sources that can be configured in WBM: ● NTP server ● Mobile wireless network ● GPS reception LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...
  • Page 45 Application examples 5.4 Time-of-day synchronization Requirements 1. Installation, connecting up, commissioning (Page 25) completed 2. Antenna for mobile wireless reception connected. 3. Only if the time-of-day synchronization method using the GPS signal was configured: Antenna for GPS reception connected. Procedure To set time-of-day synchronization, follow the steps below: 1.
  • Page 46 Application examples 5.4 Time-of-day synchronization LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...

  • Page 47: Configuration

    Configuration Permitted characters and character lengths When entering user names, login data, passwords etc. the following characters and character lengths are permitted. Note Leading and following spaces Leading and following spaces are not permitted in names. These result in an error message in the WBM indicating an incorrect entry.
  • Page 48 Configuration 6.1 Permitted characters and character lengths Input box Minimum Maximum Permitted characters character character permitted length length characters Users / groups Digits 0 ... 9 including special characters. Phone numbers • Typical special characters are for example + / * ( ), and spaces.

  • Page 49: Establishing A Connection To The Cmr

    Configuration 6.2 Establishing a connection to the CMR Establishing a connection to the CMR For the configuration of the CMR, you require a PC with a Web browser. You configure using the Web user interface (WBM) of the CMR. Note A maximum of 2 simultaneous logins (sessions) are possible.
  • Page 50 Configuration 6.2 Establishing a connection to the CMR Calling up the start page of the CMR ● In the address line of the browser, enter the IP address of the CMR in full. In the factory setting, the IP address is: http://192.168.0.3 Entering the user name and password 1.

  • Page 51: Basics Of Configuration

    Configuration 6.2 Establishing a connection to the CMR Disable other LAN connections If other LAN connections are active on the PC, disable these LAN connections while you are setting the configuration. Follow the steps below if working with Windows 7: 1.
  • Page 52 Configuration 6.2 Establishing a connection to the CMR Symbol Meaning Number of active sessions Shows the number of active sessions Automatic update active Regular updating of the page content of the WBM is activated. Automatic update inactive Regular updating of the page content of the WBM is deactivated. Print By clicking this button, you can print out the content of the page you are currently viewing.

  • Page 53: Language Selection

    Configuration 6.2 Establishing a connection to the CMR 6.2.3 Language selection The Web user interface of the CMR is available in several languages. At the top right you will see a drop-down list for the language selection. You can change the language setting for the entire Web user interface at any time.

  • Page 54: Start Page

    Configuration 6.3 Start page Start page Figure 6-1 Start page– "Overview" tab Login After successfully logging in (Page 49), the start page of the CMR appears. Display of the current operating status The start page shows an overview of the current operating status of the CMR. General Module name Display of the name you assigned on the "System"...

  • Page 55: System

    Configuration 6.4 System Data connection established • Yes with display GPRS (LOGO! CMR2020) or LTE (LOGO! CMR2040) • Data connection for Display of the time since the last data connection. (dd:hh:mm:ss) APN used Display of the access point (APN) you created on the "WAN" (Page 81) page. Access Point Name: Name of the access point for access to a mobile wireless data net- work.

  • Page 56: General

    Configuration 6.4 System 6.4.2 General Figure 6-2 System – "General" tab Module name Enter any name for your module. Only use a DNS-compliant name as the module name. DNS-compliant names are, for example, used for diagnostics. Plant description Enter any name for your plant. End session after inactive period (minutes) If you are no longer working with the WBM, set the time after which your session will be forced to close.

  • Page 57: Hardware Information

    Configuration 6.4 System Activating GPS Activate/deactivate GPS reception. Make sure that an antenna is connected to the GPS input: ● To activate GPS, select the entry "Yes" from the "Activate GPS" drop-down list. ● To deactivate GPS, select the entry "No" from the "Activate GPS" drop-down list. "Apply"...

  • Page 58: System Time

    Configuration 6.4 System SD card You have inserted an SD card and the CMR recognizes the card. The following is displayed: ● Whether or not an SD card is plugged in. ● The capacity and the free memory space on the SD card. 6.4.4 System time Figure 6-4...
  • Page 59 Configuration 6.4 System You have three possible time-of-day synchronization methods available: ● NTP (time server) If you set time-of-day synchronization using NTP, select the "Activate data connection via the mobile wireless network" (Page 80) check box. ● GPS ● GSM/LTE mobile wireless network Check whether your mobile wireless provider supports this function.
  • Page 60 Configuration 6.4 System Time-of-day synchronization method Note Time-of-day synchronization via a mobile wireless network If you want to use the time-of-day synchronization via the mobile wireless network: • Check whether this service is supported by your mobile wireless provider. The intervals of time-of-day synchronization points can deviate considerably: The first time the device books into the mobile wireless network, the time of day is transferred by the mobile wireless provider.
  • Page 61 Configuration 6.4 System ● Using the "Update interval" drop-down list, you specify the intervals at which the time is synchronized using the selected time-of-day synchronization method. If you synchronize the time of day via the GSM/LTE mobile wireless network, you cannot specify an update interval.

  • Page 62: Diagnostics

    Configuration 6.5 Diagnostics Diagnostics 6.5.1 Calling the Web page In the navigation panel, select the "Diagnostics" entry and click on the available tabs: ● Diagnostics buffer ● SMS notifications 6.5.2 Diagnostics buffer Figure 6-5 Diagnostics - "Diagnostics buffer" tab The diagnostics buffer shows you a maximum of 20 entries of 200 possible entries. You can do the following with the diagnostics buffer: ●...
  • Page 63 Configuration 6.5 Diagnostics Events logged in the diagnostics buffer The following events are logged during operation of the CMR: ● Operating messages such as startup, change to the configuration. ● Establishment/interruption of the connection to the BM. ● Establishment/interruption of the connection to the mobile wireless network. ●...

  • Page 64: Sms Notifications

    Configuration 6.5 Diagnostics 6.5.3 SMS notifications Figure 6-6 Diagnostics - "SMS notifications" tab In the "SMS notifications" tab, you set whether or not a recipient group is notified if an error occurs (FATAL or ERROR). Note Messages without SMS notifications •...

  • Page 65: Maintenance

    Configuration 6.6 Maintenance Maintenance 6.6.1 Calling the Web page In the navigation panel, select the "Maintenance" entry and click on the available tabs: ● Configuration ● Firmware ● System ● Online support 6.6.2 Configuration Figure 6-7 Maintenance – "Configuration" tab LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...
  • Page 66 Configuration 6.6 Maintenance Load Configuration Load configuration from PC With this function a configuration created previously and saved on the PC is loaded on the CMR. Configuration files have the file extension ".cfg". 1. To search for configurations on the PC, click the "Browse" button. 2.

  • Page 67: Firmware

    Configuration 6.6 Maintenance Save configuration on SD card Note Only a configuration with a fixed name is permitted on the SD card. You can do the following with a configuration of the CMR: 1. Save it on the SD card. 2.
  • Page 68 Digitally signed and encrypted firmware prevents manipulation by third parties To be able to check the authenticity of the firmware, the firmware is digitally signed by Siemens. This allows manipulation by third parties to be detected and prevented. The encryption of the firmware is intended to prevent re-engineering.

  • Page 69: System

    Configuration 6.6 Maintenance Display boxes with additional information on the firmware ● Status Indicates errors while loading the firmware: For example format error if you load a file different from the required firmware. ● Signature status Shows you the result of the signature check. ●...

  • Page 70: Reset To Factory Settings

    Configuration 6.6 Maintenance Restart via the Web user interface ● If you click the "Run restart" button in the "System" tab, the restart is executed immediately. Result: The CMR restarts. Restart using the SET button In the small opening labeled SET, there is a button that is used to restart or shut down the device.
  • Page 71 Configuration 6.6 Maintenance Note Backing up configuration data on PC or SD card If you do not want to discard the configuration data you have entered, you can back up the data externally and load it again after resetting to factory settings. For information on this, refer to section Configuration (Page 65) After saving the configuration data on an SD card, note the following: •...

  • Page 72: Online Support

    The data is saved on the SD card in a file with the name "support.bin". The information in this file is encrypted and can therefore only be read by Siemens Industry Online Support.
  • Page 73 Configuration 6.6 Maintenance Configuration of the logging To load the configuration of the logging from online support onto the CMR, follow the steps below: 1. Click the "Browse" button. 2. From your local PC, select the configuration file provided by online support, for example "Ticket123456.sup".

  • Page 74: Lan

    Configuration 6.7 LAN 6.7.1 Calling the Web page Figure 6-10 LAN – "Configuration" tab In the navigation panel, select the "LAN" entry. In the "Configuration" tab, you will find the following: ● Information about the LAN interface of the CMR ●...

  • Page 75: Configuration

    Configuration 6.7 LAN 6.7.2 Configuration Function of the LAN interface X1P1 ● The X1P1 interface (Ethernet RJ-45) of the CMR is used to connect a local PC for the configuration. ● After completed configuration, the X1P1 interface serves to connect to the BM only if the CMR is not being operated in standalone mode (Page 38).

  • Page 76: Wan

    Configuration 6.8 WAN 6.8.1 Calling the Web page In the navigation panel, select the "WAN" entry and click on the available tabs: ● Overview ● Mobile wireless settings ● Wireless cell ● SMS 6.8.2 Overview Figure 6-11 WAN – "Overview" tab In the "Overview"...

  • Page 77: Mobile Wireless Settings

    Configuration 6.8 WAN 6.8.3 Mobile wireless settings Figure 6-12 WAN – "Mobile wireless settings" tab The mobile wireless interface of the CMR connects the device to the mobile wireless network. The SMA antenna socket is available to allow reception of mobile wireless. For communication, GPRS or LTE (with fallback to HSDPA, HSUPA, UMTS or GPRS) is used on the mobile wireless interface.

  • Page 78: Activate Mobile Wireless Interface

    Configuration 6.8 WAN Access parameters You configure your mobile wireless connection in the "Mobile wireless settings" tab. For access to the GSM mobile wireless network and to the HSPA, UMTS, GPRS or LTE services, you require the following parameters: ● The PIN protects the SIM card against unauthorized use. ●...

  • Page 79: Pin Of The Sim Card

    Configuration 6.8 WAN 6.8.3.2 PIN of the SIM card Entering the PIN Note SIM card without PIN The CMR also works with SIM cards without a PIN. In this case, do not make an entry in the " PIN of the SIM card" input box. Entry of an incorrect PIN The last entered (incorrect) PIN is saved.

  • Page 80: Allow Roaming

    Configuration 6.8 WAN 6.8.3.3 Allow roaming Roaming means that the mobile wireless network of your mobile wireless provider is no longer reachable and another mobile wireless provider takes over the CMR in its mobile wireless network. If the specified mobile wireless network is no longer reachable, specify whether or not the CMR should log in to another mobile wireless network.

  • Page 81: Apn / User Name / Password

    Configuration 6.8 WAN 6.8.3.6 APN / User name / Password Note Searching for APN, user name and password of the mobile wireless provider You can obtain information about this access data from your mobile wireless provider or from the Internet. •...

  • Page 82: Wireless Cell

    Configuration 6.8 WAN 6.8.4 Wireless cell Figure 6-13 WAN – "Wireless cell" tab To obtain useful status information: ● Enable the mobile wireless interface in the Mobile wireless settings tab. Optimum antenna alignment To allow you to find the optimum alignment of the antenna connected to the SMA socket, you can use the "Wireless cell"...

  • Page 83: Sms

    Configuration 6.8 WAN 6.8.5 Figure 6-14 WAN – "SMS" tab In the "SMS" tab, you can do the following: ● Allow or do not allow receipt of SMS messages: – Select the check box (allow). SMS messages are received and evaluated or processed further. –...
  • Page 84 Configuration 6.8 WAN Note Do not allow receipt of SMS messages: CMR does not evaluate received SMS message If you do not allow receipt of SMS messages in the "SMS" tab: Regardless of the SMS rights you have assigned on the Users / groups (Page 89) page for the users, the CMR does not evaluate received SMS messages.

  • Page 85: Operation

    Operation In this section, you will find information about the following topics: ● How to exchange information with the BM via the CMR ● How to change values in the BM or the CMR. ● Mobile wireless communication without LOGO! BM (stand-alone operation of the CMR) Note Permitted characters and character lengths for the password You will find the conditions that apply to passwords in Permitted characters and character...
  • Page 86 Operation Reading / writing "current values" via the BM variables memory "Current values" (e.g. flags, counters) are read and written only via the BM variables memory. Note Current values: Reading/writing only via the BM variables memory For reasons of security, setting or reading of current values of the function blocks of the BM (e.g.
  • Page 87 Operation Table 7- 1 Overview of the options for accessing the LOGO! BM Value of the LOGO! BM Read access Write access with action Write access using SMS Digital inputs (I) Digital flags (M) Digital outputs (Q) Analog inputs (AI) Analog flags (AM) Analog outputs (AQ) Cursor keys (C)

  • Page 88: Users / Groups

    Operation 7.1 Users / groups In the following figure, select the block B007 from your control program with the stopwatch function. Figure 7-2 Variable Memory Configuration 3. Within the B007 block then select a variable to be monitored. 4. By clicking the "OK" button, you confirm your selection. The selected variable is transferred to the VM.

  • Page 89: Calling The Web Page

    Operation 7.1 Users / groups 7.1.1 Calling the Web page In the navigation panel, select the "Users / groups" entry and click on the available tabs: ● Users ● Recipient groups 7.1.2 Users Figure 7-3 Users / groups - "User" tab You can enter a maximum of 20 users in the tab.
  • Page 90 Operation 7.1 Users / groups Attributes Enter the name, description and phone number of the user in the input boxes. ● Name User name you can select freely. This name is not used as a login and may contain special characters. ●...
  • Page 91 Operation 7.1 Users / groups Change login data You can change the login and the password of every user: 1. Select the required user in the list. 2. Select the "Change login data" check box. In the input boxes, change the login and password of the user. 3.

  • Page 92: Recipient Groups

    Operation 7.1 Users / groups 7.1.3 Recipient groups Figure 7-4 Users / groups - "Recipient groups" tab In this tab, you set up your recipient groups or make changes to recipient groups that have already been set up. You can set up a maximum of five groups each with ten users per group. If you click the "Apply"...
  • Page 93 Operation 7.1 Users / groups Change group 1. In the list, select the row with the group you want to modify. The selected group is displayed under "Change group". 2. You can now change the name and description. – By selecting check boxes in the lower part of the page, you add new users. –...

  • Page 94: Monitoring

    Operation 7.2 Monitoring Monitoring Before you start to configure monitoring of a BM or the CMR in stand-alone mode, read the following section carefully: ● The principle of monitoring and message configuration is explained below in a brief overview (Page 96). ●...

  • Page 95: Which Task Needs To Be Completed? - Which Steps Are Necessary For This

    Operation 7.2 Monitoring 7.2.2 Which task needs to be completed? - Which steps are necessary for this? To allow better orientation, you will find a graphic overview of the individual applications/tasks and the steps required here: LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...

  • Page 96: Principle Of Monitoring And Message Configuration

    Operation 7.2 Monitoring 7.2.3 Principle of monitoring and message configuration Figure 7-5 Monitoring - procedure for configuration Overview You will see all the configured signal definitions with their current status. When shipped, the inputs and outputs of the CMR have already been created as signals and are displayed in the overview.
  • Page 97 Operation 7.2 Monitoring LOGO! BM A connection between the CMR and BM is only established if you have selected the "Active" check box. If you have deselected the "Active" check box, no connection is established to the BM. ● You enter the IP address of your BM. ●...

  • Page 98: Overview

    Operation 7.2 Monitoring Assignments You assign certain actions to the defined events, for example sending an SMS message to a particular recipient group if an output of the BM changes. In the lower part of the page under "If:" and "Then:" you will see which action will be executed along with all the set parameters.
  • Page 99 Operation 7.2 Monitoring Display if the connection between the CMR and BM is interrupted ● In the "LOGO! BM" tab, you have configured a connection between the CMR and BM. ● You have configured LOGO!-BM signal types in the "Signal definitions" tab. The connection between the CMR and BM is interrupted, for example by removing the Ethernet cable: ●...

  • Page 100: Logo! Bm

    Operation 7.2 Monitoring 7.2.5 LOGO! BM Establishing communication between IBM and CMR Figure 7-7 Monitoring - "LOGO! BM" tab 1. Enter the IP address of your BM in the "IP address of the LOGO! BM" input box. 2. Select the "Active" check box. This establishes a connection between the CMR and BM. If the check box is disabled, there is no connection between the CMR and BM.

  • Page 101: Message Texts

    Operation 7.2 Monitoring 7.2.6 Message texts Figure 7-8 Monitoring – "Message texts" tab Adding a new message text You can create various SMS message texts. You can assign a symbolic name to every message text. You can create the text freely with a maximum of 160 characters per message text.
  • Page 102 Operation 7.2 Monitoring Deleting a message text Note Elements that are being used cannot be deleted You can only delete an element (signal, text, user, recipient group, event, action) if the element is unused. If the element is used, e.g. a user in a recipient group or a signal in an event, you cannot delete the element.

  • Page 103: Signal Definitions

    Operation 7.2 Monitoring 7.2.7 Signal definitions Figure 7-9 Monitoring – "Signal definitions" tab You specify which signals of the BM or the CMR you want to monitor. In the upper part of the page, you will see a list with the currently configured signal definitions: ●...
  • Page 104 Operation 7.2 Monitoring Adding a new signal definition 1. In the lower part of the page, click the "Add" button. 2. An input box and three drop-down lists are then available for the configuration: Name – Freely selectable symbolic signal name. Signal source –...

  • Page 105: Events

    Operation 7.2 Monitoring 7.2.8 Events Figure 7-10 Monitoring – "Events" tab For a selected signal, you define an event, for example "I1 changes to 0". In the upper part of the page, you will see a list with the currently configured events: ●...
  • Page 106 Operation 7.2 Monitoring Adding a new event 1. In the lower part of the page, click the "Add" button. 2. An input box and two drop-down lists are then available for the configuration: Name – Freely selectable symbolic name for the event. Signal name –...

  • Page 107: Actions

    Operation 7.2 Monitoring 7.2.9 Actions Figure 7-11 Monitoring – "Actions" tab You specify one or more actions, initially not associated with an event. In the upper part of the page, you will see a list with the currently configured actions: ●...
  • Page 108 Operation 7.2 Monitoring Adding a new action 1. In the lower part of the page, click the "Add" button. 2. An input box and three drop-down lists are then available for the configuration: Name – Freely selectable symbolic name for this action. Destination –...

  • Page 109: Forwarding Gps Position Data To Logo! Bm

    Operation 7.2 Monitoring Changing an action 1. In the list, select the row with the action you want to modify. 2. Change the action with "Change action" in the lower part of the page. Result: If you click the "Apply" button, your modified action is adopted and displayed in the list.
  • Page 110 Operation 7.2 Monitoring Data structure of the GPS position data The block of data transferred to the BM is written byte by byte and has a length of 16 bytes. The data block is structured as follows: Note Representation of the letters Letters are represented as decimal ASCII characters: For example "78"...

  • Page 111: Assignments

    Operation 7.2 Monitoring Byte number Parameter Meaning count Write Counter: This is incremented each time the GPS data is written by the CMR. res1 reserved for later use 7.2.10 Assignments Figure 7-13 Monitoring – "Assignments" tab You assign an action to an event you have configured. In the upper part of the page, you will see a list with the assignments configured up to now: ●...
  • Page 112 Operation 7.2 Monitoring If you click the "Apply" button, all the settings you made in the "Assignments" tab are adopted and displayed in the list. Note The monitoring of the event only becomes active with the assignment event → action 1.
  • Page 113 Operation 7.2 Monitoring Then: Action ● From the drop-down list, select the entry of the action you have created. The entry is displayed with the symbolic name you assigned. The grayed out "Action definition" allows you to check the definition of the action. The name originates from the "Action definition"...

  • Page 114: Example Of A Monitoring Configuration

    Operation 7.2 Monitoring 7.2.11 Example of a monitoring configuration The following simple example is intended to illustrate the steps for a monitoring configuration as explained above. Assumptions ● A water tank holds 100 liters. If the 100 liters is exceeded, and alarm message will be sent to the maintenance staff in the form of an SMS message.
  • Page 115 Operation 7.2 Monitoring 3. Following this, enter the two users User-1 and User-2 in the "User" tab with the following properties: User-1 – User-1 is the fitter with the unique login "SK". – The SMS message from User-1 is received from the CMR with the phone number 0175-12345678 and evaluated.
  • Page 116 Operation 7.2 Monitoring 4. You now need to assign the two employees to a recipient group "Maintenance Staff" in the Water Works ("Description"): Figure 7-16 Users / groups - "Recipient groups" tab: Assigning a recipient group 5. In the "Content" input box of the "Message texts" tab, enter the text of the relevant alarm SMS message: "Alarm! Overflow in tank 1".
  • Page 117 Operation 7.2 Monitoring 6. Create the signal definition: Figure 7-18 Monitoring – "Signal definitions" tab: Creating the signal definition 7. Create the event: Figure 7-19 Monitoring – "Events" tab: Creating an event LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...
  • Page 118 Operation 7.2 Monitoring 8. Configure an action to suit the created event. You can also assign this action to another event later: Figure 7-20 Monitoring – "Actions" tab: Configuring the action 9. Finally make the assignment (event → action): Figure 7-21 Monitoring –...

  • Page 119: Sms Message Structures And Examples

    Operation 7.3 SMS message structures and examples Result of the configuration The result of the configuration is as follows: When the water level sensor I1 of the LOGO! BM changes to "1", the two employees of the maintenance staff "User-1"/fitter and "User2"/foreman are sent an SMS message with the text "Alarm! Overflow in tank 1".
  • Page 120 Operation 7.3 SMS message structures and examples The following conventions apply to queries and write access: ● The keywords must always be in uppercase letters. ● With write access, the "?" character is omitted after the keyword. You need to start with a password: –...

  • Page 121: Sms Error Messages

    Operation 7.3 SMS message structures and examples The number of SMS jobs/time is limited The CMR stores a limited number of SMS send jobs in a job queue. Sending an SMS message may take several seconds due to the delayed transfer in the mobile wireless network.

  • Page 122: Syntax Of All Sms Commands

    Operation 7.3 SMS message structures and examples 7.3.3 Syntax of all SMS commands Syntax of the SMS commands and possible responses What information would I like to have? Example Read diagnostics data from the CMR DIAG? Read GPS position from the CMR GPSPOSITION? Read process image (PI) MONITOR?
  • Page 123 Operation 7.3 SMS message structures and examples Read diagnostics data from the CMR Function Requesting diagnostics data from the CMR Access Reading, no password necessary Structure and key- DIAG? word Return values Diagnostics data or error message: SMS error messages (Page 121) Structure of diagnostics data:Diagnostics SMS message (Page 131) Example Send SMS message: DIAG?
  • Page 124 Operation 7.3 SMS message structures and examples Read BM status Structure and key- STATUS? word Return values RUN, STOP or error message: SMS error messages (Page 121) Example Send SMS message: STATUS? Reply SMS message: STATUS:RUN Set BM status Function Setting the BM status to RUN or STOP Access Writing, password required...
  • Page 125 Operation 7.3 SMS message structures and examples Reading the current value from the BM variables memory: Read "current values" Function Reading the current value from the BM variables memory. You obtain the address from the BM variables memory. The value <data type> is BYTE, WORD or DWORD.
  • Page 126 Operation 7.3 SMS message structures and examples Set digital output of the CMR Return values OK or error message Example Send SMS message: Password;OUTPUT=O1,1 Reply SMS message: OUTPUT=O1,1:OK Changing the phone number of a user Function Changing the phone number of a user uniquely specified by the <login>. To use this function, the release must be entered for the selective use in the WBM under Users / groups in the User tab Hotspot-Text (Page 89).

  • Page 127: Reply Sms Message To The "Monitor?" Command

    Operation 7.3 SMS message structures and examples 7.3.5 Reply SMS message to the "MONITOR?" command Process image The process image shows the current statuses and values of the CMR and the BM with its expansion modules. The number of I/O elements actually in the system depends on the expansion modules being used.
  • Page 128 Operation 7.3 SMS message structures and examples Structure of the reply SMS message of the process image (PI-SMS) Note Maximum of six SMS messages The reply SMS includes a maximum total of six SMS messages. The number of SMS messages depends on the monitored signals. Meaning of "*"...
  • Page 129 Operation 7.3 SMS message structures and examples The reply SMS message of the CMR to a process image query has the following prepared structure: Table 7- 2 Reply SMS message: Structure CMR I: Name of the values block for CMR inputs ******xx CMR input 1 and 2, values from right (I1) to left (I2) CMR Q: Name of the values block for CMR outputs...
  • Page 130 Operation 7.3 SMS message structures and examples xxxxx Analog input 2 xxxxx Analog input 3 xxxxx Analog input 4 xxxxx Analog input 5 xxxxx Analog input 6 xxxxx Analog input 7 xxxxx Analog input 8 BM AQ: Name of the value block for LOGO! BM - analog outputs xxxxx Analog output 1 xxxxx...

  • Page 131: Diagnostics Sms Message

    Operation 7.3 SMS message structures and examples BM AI: Values blocks BM M, BM S, BM C and BM F not used and not displayed xxxxx 00350 No further values in this and the following values blocks, therefore not shown in the SMS message.

  • Page 132: Disruptions And Their Possible Causes

    Operation 7.4 Disruptions and their possible causes SMS command "DIAG? Response" If the information cannot be sent with an SMS message, there is a 2nd SMS that starts with "DIAG? Response". Such a reply SMS message can appear as follows: Example - the reply includes 2 SMS messages: 1.
  • Page 133 Operation 7.4 Disruptions and their possible causes Disruption Meaning Solution Bad or no time-of-day synchronization Bad mobile wireless reception Correct the alignment of the anten- • • using NTP Wrong configuration in the WBM • Activate the mobile wireless inter- •...
  • Page 134 Operation 7.4 Disruptions and their possible causes LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...

  • Page 135: Dimension Drawings

    Dimension drawings Figure 8-1 All dimensions in millimeters LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...
  • Page 136 Dimension drawings LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...

  • Page 137: Accessories

    SMA connector, including installation bracket, screws, wall plugs. You will find detailed information in the device manual. You will find this on the Internet on the pages of Siemens Industry Online Support under the following entry ID: 23119005 (http://support.automation.siemens.com/WW/view/en/23119005) >...
  • Page 138 Accessories 9.1 Antenna and cabling technology for LOGO! CMR Figure 9-2 LTE antenna, ANT896-4MA, rod antenna Article number Explanation 6GK5896-4MA00-0AA3 IRC antenna ANT 896-4MA for GSM (2G), UMTS (3G) and LTE (4G), omnidirectional, radial swiveling, with additional joint, antenna gain: 2 dBi, incl. SMA connector, IP54, -40 ...
  • Page 139 Accessories 9.1 Antenna and cabling technology for LOGO! CMR Figure 9-3 LTE antenna, ANT896-4ME, cylinder shaped antenna Article number Explanation 6GK5896-4ME00-0AA0 Cylinder shaped antenna ANT 896-4ME for GSM (2G), UMTS (3G) and LTE (4G), omnidirectional, incl. N female connector: 3 dBi, IP66, -40 ... +70 °C, for mounting on cabinet;...
  • Page 140 Accessories 9.1 Antenna and cabling technology for LOGO! CMR Cabling Table 9- 1 Antenna connecting cables Article number Cable lengths Explanation 6XV1875-5LE30 0.3 m 6XV1875-5LH10 6XV1875-5LH20 6XV1875-5LH50 Flexible connecting cable preassembled SIMATIC NET N-Connect/SM male/male 6XV1875-5AH10 6XV1875-5AH20 6XV1875-5AH50 6XV1875-5AN10 10 m Flexible connecting cable preassembled SIMATIC NET N-Connect/N-Connect male/male Cabinet feedthrough/coupling device...
  • Page 141 Accessories 9.1 Antenna and cabling technology for LOGO! CMR Lightning protector Article number Explanation 6GK5798-2LP00-2AA6 Lightning protector LP798-1N, for the antennas ANT790 and ANT890, for N-Connect connectors, N-Connect/N-Connect female/female connector, suitable for 0 ... 6 GHz, IP68, also suitable for DC feed-in via the antenna cable LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...
  • Page 142 Accessories 9.1 Antenna and cabling technology for LOGO! CMR LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...

  • Page 143: Technical Specifications

    Technical specifications Table 10- 1 Technical specifications of LOGO! CMR2020 and LOGO! CMR2040 Technical specifications Article numbers LOGO! CMR2020 6GK7 142-7BX00-0AX0 LOGO! CMR2040 6GK7 142-7EX00-0AX0 Attachment to Industrial Ethernet Interface X1P1 for local applications Quantity • RJ-45 jack Design • 10/100-Base-T, Ethernet IEEE 802, autocrossover, autonegotia- Properties •...
  • Page 144 Technical specifications Technical specifications Current consumption I = 250 mA (maximum) At 12 V • I = 125 mA (maximum) At 24 V • 450 mA I (burst) • Effective power loss (typical) 3.0 W Input Quantity • 12 to 24 V (nominal) Voltage range (permitted) •...
  • Page 145 Technical specifications Technical specifications EDGE Properties Multislot class 10, end device class B • • Coding scheme: 1 ... 9 • Transmission speeds (maximum) Downlink: 236.8 kbps • • Uplink: 236.8 kbps • GPRS Properties Multislot class 10, end device class B •...
  • Page 146 Technical specifications LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...

  • Page 147: Approvals

    You can check which of the following approvals have been granted for your product by the markings on the type plate. Current approvals on the Internet You will also find the current approvals for the product on the Internet pages of Siemens Industry Online Support under the following entry ID: 91689511 (http://support.automation.siemens.com/WW/view/en/91689511) →...
  • Page 148 Approvals 11.1 National approvals GSM, UMTS and LTE EU declaration of conformity The EC Declaration of Conformity is available for all responsible authorities at: Siemens Aktiengesellschaft Industry Automation Industrielle Kommunikation SIMATIC NET Postfach 4848 D-90327 Nürnberg Germany You will find the EC Declaration of Conformity for these products on the Internet at the following address: 91689511 (http://support.automation.siemens.com/WW/view/en/91689511)
  • Page 149 Approvals 11.1 National approvals GSM, UMTS and LTE R&TTE directive According to Article 3 (1) a) of the R&TTE directive: Protection of health and safety. Harmonized standards: EN 60950-1:2006+A11:2009+A1:2010+A12:2011+AC:2011 • 1 EN 62479:2010 • 2 According to Article 3 (1) b) of the R&TTE directive: EMC Harmonized standards: ETSI EN 301 489-1:V1.9.2 •...
  • Page 150 Approvals 11.1 National approvals GSM, UMTS and LTE UL approval Certificate No. E85972, Report No. E85972 ● Underwriter Laboratories, Inc.: UL 508 Listed (Industrial Control Equipment) ● Canadian Standards Association: CSA C22.2 No. 142 cULus approval Certificate No. E115352, Report No. E115352 ●...

  • Page 151: Documentation References

    Documentation references Where to find Siemens documentation ● You will find the article numbers for the Siemens products of relevance here in the following catalogs: – SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI – SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog...
  • Page 152 Documentation references LOGO! CMR2020 / LOGO! CMR2040 Operating Instructions, 09/2014, C79000-G8976-C356-01...

  • Page 153: Index

    Index Abbreviation/acronym, 4 Hardware version, 3 Access parameters, 78 Antennas, 137 Optimum alignment, 82 Article number, 3 Inputs, 28 Authentication, 81 Installation on a DIN rail, 30 Cause of the error, 132 Operation of the CMR Configuration Requirements, 14 Invalid entries, 52 Options for access Procedure, 52 to the LOGO! BM, 87...
  • Page 154 Index Safety notices on the use of the device, 25 Saving the configuration, 52 Screw-type terminals Power supply, 26 SD card Recommended, 35 SET button Functions, 18 Reset to factory settings, 71 Restart, 70 Setting up the Web browser, 49 Signal strength, 29 Mobile wireless network of the CMR location, 55 SIM card...

This manual is also suitable for:

Simatic logo! cmr2040

Table of Contents