Power Supply Module
Power Supply Module
Power Supply Module Overview
Applicable model numbers:
• C9400-PWR-3200AC and spare C9400-PWR-3200AC=
• C9400-PWR-2100AC and spare C9400-PWR-2100AC=
Note
Unless otherwise indicated, power supply information in this document applies to all available power supply
modules.
The chassis supports one to eight field-replaceable, AC-input power supply modules, each with its own on/
off rocker switch.
Features
• Self-cooling, with a minimum airflow of 17 cubic feet per minute (CFM) at 100 percent load.
• Provides a regulated 55 VDC PoE compliant main output and 3.3 VDC standby output.
• Supports only single-phase source AC. Source AC can be out of phase between multiple power supplies
• Has a release latch and cord-retention mechanism on the front panel of the module, to avoid accidental
• Supports redundant and combined configuration modes. A single (non-redundant) or a dual (redundant)
• Has a built-in, front-facing, passive RFID tag that uses Ultra High Frequency (UHF) RFID technology
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
20
or multiple AC-power plugs on the same power supply because all AC power supply inputs are isolated
removal of the module or the attached power cord.
power supply configuration, can support the following loads:
Input Voltage (VAC)
200VAC
100VAC
and requires an RFID reader with compatible software. It provides auto-identification capabilities for
asset management and tracking. The RFID tags are compatible with the Generation 2 GS1 EPC Global
Standard and are ISO 18000-6C compliant. They operate in the 860- to 960-MHz UHF band. For more
information, see
Radio Frequency Identification (RFID) on Cisco Catalyst 9000 Family
Output Power with
C9400-PWR-3200AC (In Watts)
3200W
1570W
Product Overview
Output Power with
C9400-PWR-2100AC
2112W
950W
Switches.