19" Rack Mounting - Siemens SCALANCE XR-300WG Series Operating Instructions Manual
Simatic net. industrial ethernet switches
Hide thumbs
Also See for SCALANCE XR-300WG Series:
- Configuration manual (618 pages) ,
- Operating instructions manual (100 pages)
Table of Contents
Advertisement
4.2
19" rack mounting
Mounting
Risk of injury if subjected to irregular mechanical strain
The device must be mounted in the 19" rack so that even if there is irregular mechanical
strain, no dangerous situation can result.
Figure 4-1
To install the device in a 19" rack, follow the steps below:
1. Position the device at the required location in the 19" rack.
2. Screw the two brackets to the 19" rack in each case with 2 securing screws
3. Connect the electrical connecting cables, refer to the section "Connecting up (Page 35)".
Uninstalling
To remove the device from a 19" rack, follow the steps below:
1. Disconnect all connected cables.
2. Undo the securing screws on the mounting brackets
3. Remove the device from the 19" rack.
SCALANCE XR-300WG
Operating Instructions, 05/2017, C79000-G8976-C454-01
CAUTION
19" rack mounting
Installation
4.2 19" rack mounting
②
.
31
- Quick Links:
- Introduction
- Product Overview
- Industrial Ethernet
Hide quick links:
Advertisement
Table of Contents
