Table of Contents
Advertisement
LED
The below table lists the led and explain their meaning.
62
See Appendix 1 for details.
SW1.5
Application Switches: Spare
SW1.6
Application Switches: Manufacturing test.
DO NOT USE: This feature is used for factory test.
See Appendix 1 for details.
SW3.1
RS485 (Reader 1) termination resistor, Data A.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW3.2
RS485 (Reader 1) termination resistor, Data B.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW4.1
RS485 (Reader 2) termination resistor, Data A.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW4.2
RS485 (Reader 2) termination resistor, Data B.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW5.1
RS485 (Reader 3) termination resistor, Data A.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW5.2
RS485 (Reader 3) termination resistor, Data B.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW6.1
RS485 (Reader 4) termination resistor, Data A.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW6.2
RS485 (Reader 4) termination resistor, Data B.
ON = termination resistor inserted
OFF = termination resistor not inserted
SW7
System reset
LED
Function
CR18
Ethernet 10/100M bit/s Green
CR25
Database status, Red
Table 8 - Switches
Values
ON= Ethernet working at
10/100M bit/s
OFF=Ethernet not working at
10/100M bit/s
ON=Database not present
OFF= Database present
-
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
- Quick Links:
- Device Overview
- System Architecture
Hide quick links:
Advertisement
Table of Contents
