Table of Contents
Related Manuals for Miele KM 6639-1
Summary of Contents for Miele KM 6639-1
- Page 1 Operating and installation instructions Ceramic hobs with induction To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-AE, SA M.-Nr. 11 246 460...
-
Page 2: Table Of Contents
Before using for the first time ................ 24 Cleaning the hob for the first time................. 24 Switching on the hob for the first time ..............24 Setting up Miele@home ..................25 Setting up Con@ctivity ..................27 Induction ...................... 30 How it works......................30 Pans........................ - Page 3 Installation dimensions – Surface-mounted ............. 69 KM 6629-1......................69 KM 6669-1......................70 KM 6699-1......................71 Installation dimensions – Flush................ 72 KM 6639-1/KM 6839-1 ..................72 KM 6679-/KM 6879-1 ................... 73 Worktop cut-out details..................74 Installation...................... 75 Surface-mounted installation ................75 Flush-fit installation ....................76...
- Page 4 Contents After sales service.................... 80 Contact in case of malfunction ................80 Data plate ......................80 Guarantee......................80...
-
Page 5: Warning And Safety Instructions
They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep these instructions in a safe place and ensure that new users... - Page 6 Warning and Safety instructions Correct application This hob is intended for domestic use and use in other similar environments. This hob is not intended for outdoor use. It is intended for domestic use only to cook food and keep it warm.
- Page 7 Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the hob unless they are constantly supervised. Children over 8 years of age may use the hob without supervision if its operation has been clearly explained to them and they are able to use it safely.
- Page 8 Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician. Damage to the hob can compromise your safety. Check the hob for visible signs of damage. Do not use the hob if it is damaged.
- Page 9 Miele authorised service technician. Otherwise the warranty is invalidated. Miele can only guarantee the safety of the appliance when genuine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts.
- Page 10 Warning and Safety instructions In areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings clean at all times. Any damage caused by cockroaches or other vermin will not be covered by the warranty.
- Page 11 Warning and Safety instructions Correct use The hob gets hot when in use and remains hot for a while after being switched off. There is a danger of burning until the residual heat indicators go out. Oil and fat can overheat and catch fire. Do not leave the hob unattended when cooking with oil and fat.
- Page 12 Warning and Safety instructions You could burn yourself on the hot hob. Protect your hands with heat-resistant pot holders or gloves when handling hot pots and pans. Do not let them get wet or damp, as this causes heat to transfer through the material more quickly with the risk of scalding or burning yourself.
- Page 13 Warning and Safety instructions Because induction heating works so quickly, the base of the pan could, under certain circumstances, heat up to the temperature at which oil or fat self-ignites within a very short time. Never leave the hob unattended during use! ...
- Page 14 Warning and Safety instructions Cleaning and care Do not use a steam cleaning appliance to clean this hob. The steam could reach electrical components and cause a short circuit. If the hob is built in over a pyrolytic oven, the hob should not be used whilst the pyrolytic process is being carried out, as this could trigger the overheating protection mechanism on the hob (see relevant section).
-
Page 15: Caring For The Environment
Please dispose of it at your local community waste collection / recycling centre or contact your Miele dealer for advice. Ensure that it presents no danger to children while being stored for disposal. -
Page 16: Guide To The Appliance
Guide to the appliance KM 6629-1, KM 6639-1, KM 6839-1 a Cooking zone with TempControl* and TwinBooster b Cooking zone with TwinBooster c PowerFlex cooking zone with TwinBooster d PowerFlex cooking zone with TwinBooster cd can be combined to form a PowerFlex cooking area e Controls and indicators * On some hobs the ceramic surface in the middle of the cooking zone with TempControl is transparent and the temperature sensor is visible. - Page 17 Guide to the appliance KM 6669-1, KM 6679-1, KM 6879-1 a Cooking zone with TwinBooster b Cooking zone with TempControl* and TwinBooster c Cooking zone with TwinBooster d PowerFlex cooking zone with TwinBooster e PowerFlex cooking zone with TwinBooster de can be combined to form a PowerFlex cooking area f Controls and indicators * On some hobs the ceramic surface in the middle of the cooking zone with TempControl is transparent and the temperature sensor is visible.
- Page 18 Guide to the appliance KM 6699-1 a Cooking zone with TempControl* and TwinBooster b PowerFlex cooking zone with TwinBooster c PowerFlex cooking zone with TwinBooster bc can be combined to form a PowerFlex cooking area d Cooking zone with TwinBooster e Controls and indicators * On some hobs the ceramic surface in the middle of the cooking zone with TempControl is transparent and the temperature sensor is visible.
-
Page 19: Controls And Display
Guide to the appliance Controls and display Sensor controls Switching the hob on and off 1, 2, 3 ..9, B Numerical display - Setting the power level: 1–9 = Power level B = Booster - Setting the minute minder - Setting the switch-off time for a cooking zone ... - Page 20 Guide to the appliance Timer a Minute minder sensor control b Cooking zone indicator c Timer display : to Time : System lock/safety lock activated Demonstration mode activated alternating with d Sensor control for automatic switch-off selector for cooking zones...
-
Page 21: Cooking Zones
Guide to the appliance Cooking zones KM 6629-1, KM 6639-1, KM 6839-1 Cooking zone Ø in cm* Rating in watts for 230 V** 16–23 Normal 2300 TwinBooster, level 1 3000 TwinBooster, level 2 3650 10–16 Normal 1400 TwinBooster, level 1 1750 TwinBooster, level 2 2200 ... - Page 22 Guide to the appliance KM 6669-1, KM 6679-1, KM 6879-1 Ø in cm* Cooking zone Rating in watts for 230 V** 10–16 Normal 1400 TwinBooster, level 1 1750 TwinBooster, level 2 2200 16–23 Normal 2300 TwinBooster, level 1 3000 TwinBooster, level 2 3650 ...
- Page 23 Guide to the appliance KM 6699-1 Ø in cm* Cooking zone Rating in watts for 230 V** 16–23 Normal 2300 TwinBooster, level 1 3000 TwinBooster, level 2 3650 15–23 Normal 2100 TwinBooster, level 1 3000 TwinBooster, level 2 3650 15–23 Normal 2100 TwinBooster, level 1...
-
Page 24: Before Using For The First Time
Before using for the first time Please stick the extra data plate for Switching on the hob for the the appliance supplied with this first time documentation in the space provided The metal components have a in the “After sales service” section of protective coating which may give off a this booklet. -
Page 25: Setting Up Miele@Home
Store™. WiFi module. The hob can be connected to the household WiFi network. If your Miele cooker hood is also connected to the home WiFi network, you can control the cooker hood automatically with the Con@ctivity function. Further information can be... - Page 26 Before using for the first time Connecting via the app Connecting via WPS The Miele@mobile app can be used to Pre-requisite: You must have a WPS connect to your network. (WiFi protected setup) compatible router. Install the Miele@mobile app on your mobile device.
-
Page 27: Setting Up Con@Ctivity
Cancelling the process Setting up Con@ctivity Touch any sensor. Con@ctivity is the direct communication system between an electric Miele hob Resetting settings and a Miele cooker hood. Con@ctivity enables the cooker hood to operate It is not necessary to reset the router automatically depending on the when replacing it. - Page 28 Con@ctivity via a direct WiFi connection (Con@ctivity 3.0) hood by pressing the run-on control . Prerequisite: WiFi-enabled Miele Con@ctivity has now been activated. cooker hood With a direct WiFi connection, it is not If you do not have a home network, you...
- Page 29 Before using for the first time Cancelling the process Touch any sensor. Resetting settings It is not necessary to reset the router when replacing it. Switch the hob on. Touch the 0 sensor control on any of the numerical keybanks. ...
-
Page 30: Induction
Induction How it works Pans An induction coil is located under each Suitable pans induction cooking zone. The coil – stainless steel pans with a magnetic creates a magnetic field that reacts base directly with the base of the pan and heats it up. - Page 31 Induction No pan/unsuitable pan display Tips The set power level flashes in the – To make optimum use of the cooking numerical keybank for the cooking zone zones, choose pans with a suitable base diameter (see chapter “Cooking – if the zone has been switched on zones”).
-
Page 32: Noises
Induction Noises When using an induction hob, the following noises can occur in the pan, depending on what it is made of and how it has been constructed. Buzzing on the higher power settings. This will decrease or cease altogether when the power setting is reduced. -
Page 33: Tips On Saving Energy
Tips on saving energy – Use a lid whenever possible to minimise heat loss. – Select a smaller pan when cooking small quantities. A smaller pan uses less energy than a larger pan with very little in it. – Cook with as little water as possible. –... -
Page 34: Setting Range
Setting range The hob is programmed with 9 power levels at the factory. If you wish to fine-tune a setting, you can extend the power setting range to 17 power levels (see “Programming”). Setting range Default Extended setting settings (9 power (17 power levels) levels) -
Page 35: Operation
Operation Using the appliance Malfunction due to dirty and/or covered sensor controls. This ceramic hob is equipped with electronic sensor controls which react If the sensor controls are dirty or covered this could cause them to fail to finger contact. For safety reasons, in order to switch the appliance on, the to react, to activate a function or On/Off ... -
Page 36: Switching On The Hob
Operation Switching off a cooking zone Risk of fire with overheated food. Unattended food can overheat and To switch off a cooking zone, touch catch alight. the 0 sensor for that cooking zone. Do not leave the hob unattended ... -
Page 37: Tempcontrol
Operation Notes on use TempControl – Make sure that the ceramic surface is TempControl monitors and controls the kept clean, particularly in the area of temperature during frying: the sensor in the middle of the – the fat cannot overheat, cooking zone. - Page 38 Operation Activating TempControl Frying level Place a pan on the cooking zone and Potato pancakes add frying fat/oil if necessary. Fried potatoes made from raw potatoes Touch the sensor control for the Meat loaf frying level you want to use ( ,, ).
-
Page 39: Power Level Setting - Extended Setting Range
Operation Power level setting - Extended PowerFlex area setting range The PowerFlex cooking zones combine automatically to form a PowerFlex Touch the numerical keybank in cooking area when you place a between two number sensors. sufficiently large pot or pan on them The numbers to the left and right of the (see “Guide to the appliance - Hob”). -
Page 40: Auto Heat-Up
Operation Auto heat-up Continued Heat-up time cooking setting* [min : sec] When Auto heat-up has been activated, the cooking zone switches on Approx. 0:15 automatically at the highest setting and Approx. 0:15 then switches to the continued cooking setting which you have previously Approx. -
Page 41: Booster
Operation Activating TwinBooster Booster The cooking zones are equipped with a Level 1 TwinBooster. Place the pan on the cooking zone When activated, the power is boosted you want to use. so that large quantities can be heated Select a power level if necessary. up quickly, e.g. -
Page 42: Keeping Warm/Warming Food
Operation Activating/deactivating the Keeping Keeping warm/Warming food warm function The Keeping warm function is for Touch the or sensor control for keeping food warm when it has just the cooking zone you wish to use. been cooked and is still hot. It is not for reheating food that has gone cold. -
Page 43: Timer
Timer The hob has to be switched on if you The functions can be used at the same wish to use the timer. time. The shortest time is always A duration of between 1 minute (:) displayed and the sensor control and 9 hours 59 minutes (:) can be (minute minder) or the indicator light of the cooking zone for automatic switch-... -
Page 44: Switching Off A Cooking Zone Automatically
Timer touch the sensor repeatedly until Switching off a cooking zone the indicator light for the zone you automatically require flashes. You can set a time after which the Changing the switch-off time cooking zone will switch off automatically. This function can be ... -
Page 45: Additional Functions
Additional functions Stop & Go Recall When Stop & Go is activated, the power If the hob is switched off by mistake of all cooking zones in use is reduced to during use, this function can be used to power level 1. reset all settings. For this to work, the The cooking zone power levels and the hob must be switched on again within timer settings cannot be altered;... -
Page 46: Wipe Protection
Additional functions Wipe protection Displaying hob data The model number and software The hob sensors can be locked for version of the hob can be displayed. 20 s in order, for example, to remove There must not be any pots or pans on soiling. -
Page 47: Safety Features
Safety features The safety lock is activated when the System lock / Safety lock hob is switched on. When the safety Your hob is equipped with a system lock is activated, the hob can be lock and a safety lock to prevent the operated only under certain conditions: hob and the cooking zones being –... - Page 48 Safety features Activating the safety lock Touch and hold the and sensors at the same time for 6 seconds. The seconds can be seen counting down in the timer display. When this time has elapsed will appear in the timer display.
-
Page 49: Safety Switch-Off
Safety features Safety switch-off Power level* Maximum operating time [h:min] Sensor controls are covered Safety setting Your hob will turn off automatically if one or several of the sensors remain 10:00 8:00 5:00 covered for longer than 10 seconds, for example, by finger contact, food boiling 10:00 7:00... -
Page 50: Overheating Protection
If, despite removing the cause, the – The set power level will be reduced. overheating protection mechanism triggers again, contact your Miele – The cooking zone switches off dealer. automatically. flashes in the timer display alternating with . -
Page 51: Programming
Programming You can adapt the programming of the To save the settings hob to your personal needs. Several While the programme is showing in settings can be altered in succession. the display (e. g. :) touch the sensor until the indicators go out. After accessing programming mode, the symbol appears and ... - Page 52 Programming Settings Programme Code P:01 Demonstration mode C:00 Demonstration mode off C:01 Demonstration mode on P:02 C:00 Power management C:01 3680 W C:02 3000 W C:03 2000 W C:04 1000 W P:03 Factory default setting C:00 Factory default settings not restored C:01 Factory default settings restored P:04 Number of power levels C:00...
- Page 53 Programming Settings Programme Code P:10 Signing WiFi on C:00 Not active/deactivated C:01 Active but not configured C:02 Active and configured (cannot be selected; displays whether connection was successful) C:03 Connection possible via WPS push button C:04 WiFi reset to default (C:00) C:05 Direct WiFi connection between hob and hood without App...
- Page 54 Programming Settings Programme Code Frying level temperature P:19 C:00 140 °C C:01 145 °C C:02 150 °C C:03 155 °C C:04 160 °C C:05 165 °C C:06 170 °C C:07 175 °C C:08 180 °C Frying level temperature P:20 C:00 180 °C C.01 185 °C C:02 190 °C C:03 195 °C C:04 200 °C C:05...
- Page 55 Programming Settings Programme Code P:25 Keeping warm Plus C:00 50 °C temperature C:01 55 °C C:02 60 °C C:03 65 °C C:04 70 °C C:05 75 °C C:06 80 °C C:07 85 °C C:08 90 °C Unlisted programmes are not assigned. The factory setting is shown in bold. After the hob has been switched on, appears in the timer display for a few seconds. The total hob power may be reduced in order to meet the local network provider’s requirements.
-
Page 56: Cleaning And Care
Cleaning and care Clean the hob after every use. Risk of burning due to hot cooking zones. Dry the hob thoroughly after cleaning with water to avoid limescale residue. The cooking zones will be hot after use. Unsuitable cleaning agents Switch the hob off. - Page 57 Then carefully scrape off these residues immediately whilst they are Then clean the ceramic glass surface still hot, using a scraper blade with the Miele ceramic and stainless suitable for use on glass. steel hob cleaner (see “optional accessories”) or with a proprietary ...
-
Page 58: Problem Solving Guide
Check if the mains fuse has tripped. If it has, switched on. contact a qualified electrician or your Miele dealer (minimum fuse rating - see data plate). There may be a technical fault. Disconnect the appliance from the electricity supply for approx. - Page 59 Problem solving guide Issue Cause and remedy The hob has switched One or more of the sensor controls are covered, e.g. off automatically. When by finger contact, food boiling over or an object. the element is switched Clean off any dirt and/or remove the object (see back on, ...
- Page 60 alternating with The hob is incorrectly connected. flashes in the timer Contact your Miele dealer. The hob must be display. connected to the mains according to the wiring diagram. 1 and a number, e.g. 1-0...
-
Page 61: Optional Accessories
(see end of this booklet for contact details). Removes heavy soiling, limescale Pans deposits and aluminium residues Miele offer a wide range of pans which Microfibre cloth are perfect for Miele hobs. Please contact your Miele dealer for more details on individual products. -
Page 62: Safety Instructions For Installation
Safety instructions for installation Damage risk from incorrect installation. Incorrect installation can cause damage to the hob. The hob must only be installed by a qualified person. Risk of electric shock. Incorrect connection to the mains supply may result in an electric shock. The hob must be connected to the electrical supply by a qualified person only. -
Page 63: Safety Distances
Safety distances Safety distance above the hob The safety distance specified by the manufacturer of the cooker hood must be maintained between the hob and the cooker hood above it. If combustible objects are installed above the hob (e.g., cabinets, utensil rail, etc.), a minimum safety distance of 760 mm must be maintained. - Page 64 Safety distances Safety distances to the sides and back of the hob It is advisable to install the hob with plenty of space either side of it. The minimum distance shown below must be maintained between the back of the hob and a tall unit or wall. The minimum distance , ...
- Page 65 Safety distances Minimum safety distances Interim shelf underneath the hob It is not necessary to fit an interim shelf underneath the hob but one may be To ensure sufficient ventilation to the fitted if you wish. hob, a certain gap must be left between the underside of the hob and any oven, Leave a gap of 10 mm at the back of interim shelf or drawer.
- Page 66 Safety distances Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche cladding is made from a combustible material (e.g. wood) a minimum safety distance ...
-
Page 67: Installation Notes
Installation notes Tiled worktops Onset installation Seal between the hob and the worktop Grout lines and the hatched area underneath the hob frame must be smooth and even. If they are not the hob will not sit flush with the worktop and the sealing strip underneath the ... -
Page 68: Flush-Fit Installation
Installation notes Natural stone worktops Flush-fit installation The hob is set directly in the cut-out. Flush-fit installation is only possible in natural stone (granite, marble), solid Solid wood worktops, tiled worktops, wood and tiled worktops. Certain glass worktops models are suitable for building into The hob is set on a wooden frame glass worktops - please see relevant inside the cut-out. -
Page 69: Installation Dimensions - Surface-Mounted
Installation dimensions – Surface-mounted All dimensions are given in mm. KM 6629-1 a Front b Casing depth c Mains connection box The mains connection cable (L = 1440 mm) is supplied loose... - Page 70 Installation dimensions – Surface-mounted KM 6669-1 a Front b Casing depth c Mains connection box The mains connection cable (L = 1440 mm) is supplied loose...
- Page 71 Installation dimensions – Surface-mounted KM 6699-1 a Front b Casing depth c Mains connection box The mains connection cable (L = 1440 mm) is supplied loose...
-
Page 72: Installation Dimensions - Flush
Installation dimensions – Flush All dimensions are given in mm. KM 6639-1/KM 6839-1 a Front b Casing depth c Mains connection box The mains connection cable (L = 1440 mm) is supplied loose d Stepped cut-out, natural stone worktop... - Page 73 Installation dimensions – Flush KM 6679-/KM 6879-1 a Front b Casing depth c Mains connection box The mains connection cable (L = 1440 mm) is supplied loose d Stepped cut-out, natural stone worktop...
-
Page 74: Worktop Cut-Out Details
Installation dimensions – Flush KM 6679(-1)/KM 6879(-1) Worktop cut-out details Natural stone worktops d Stepped cut-out a Worktop Solid wood, tiled and glass worktops b Hob c Gap As the ceramic glass and the worktop cut-out have a certain dimensional tolerance, the size of the gap can vary (min. -
Page 75: Installation
Installation the worktop on all sides. This is Surface-mounted installation important to ensure an effective seal Create the worktop cut-out. all round. Remember to maintain the minimum safety distances (see “Safety If the seal does not meet the worktop distances”). -
Page 76: Flush-Fit Installation
Installation Seal the gap between the hob and Flush-fit installation worktop with a silicone sealant that is Create the worktop cut-out. heat-resistant to at least 160 °C. Remember to maintain the minimum safety distances (see “Safety Damage from unsuitable sealant. distances”). -
Page 77: Electrical Connection
Electrical connection Total power rating Danger of injury. Miele cannot be held liable for See data plate unauthorised installation, Connection data maintenance and repair work as this can be dangerous to users. The connection data is quoted on the Miele cannot be held liable for data plate. - Page 78 (black) button springs out. it must be replaced with a special connection cable, type H 05 VV-F (PVC- Built-in circuit breakers insulated), available from your Miele Circuit breakers at least type B or C: dealer. Switch the lever from 1 (on) to 0 (off).
- Page 79 Electrical connection Wiring diagram a b c d e 200-240 V~ 200-240 V~ 200-240 V~ (L3) 200-240 V~ 200-240 V~ b c d (L2) 200-240 V~...
- Page 80 In the event of any faults which you cannot remedy yourself, please contact your Miele Dealer. Contact details for your Miele dealer are given at the end of this document. Please quote the model and serial number of your appliance when contacting your Miele dealer.
- Page 83 Tel. +966 11 2013501, Fax. +966 11 2013502 Taif Hadiya Street Tel. +966 12 7327001, Fax. +966 12 7369596 Khobar Al Zahran Road Tel. +966 13 8646150, Fax. +966 13 8646190 Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany...
- Page 84 KM 6629-1, KM 6639-1, KM 6669-1, KM 6679-1, KM 6699-1, KM 6839-1, KM 6879-1 en-AE, SA M.-Nr. 11 246 460 / 00...