Table of Contents
Advertisement
Parameter assignment of a Mobile Client
4.10 Functions for service and commissioning
4.9.6
Configuring Telnet for remote control
When the Telnet service is activated, you can remotely control the HMI device via Telnet.
See also Glossary (Page 155).
Requirement
You have opened the "Telnet" tab in the "WinCC Internet Settings" dialog with the
"WinCC Internet Settings" icon.
①
Procedure
1. If you want to use the Telnet service, select the check box.
2. Confirm your entries.
The dialog closes.
3. Restart the HMI device.
The Telnet service can now be used.
4.10
Functions for service and commissioning
4.10.1
Saving to external storage medium – backup
You can use this function to back up the operating system, applications and data from the
flash memory of the HMI device to an external storage medium.
Use a SIMATIC HMI Memory card as the storage medium or an industrial USB flash drive.
88
Check box for activating the Telnet service
Operating Instructions, 07/2015, A5E36360099-AA
Mobile Client900RXA
Advertisement
Table of Contents
