Fire Safety Model CP-2ER Control Panel Operation, Installation, and Maintenance Manual Siemens Building Technologies, Inc. Siemens Building Technologies, Ltd. 8 Fernwood Road 2 Kenview Boulevard Florham Park, New Jersey 07932 Brampton, Ontario L6T 5E4 CN P/N 315-093523-7 Technical Manuals Online! - http://www.tech-man.com...
Page 2
Table of Contents INTRODUCTION ....................1 OPERATION ......................2 CONNECTION DIAGRAM ................4-5 INSTALLATION AND WIRING ................7 POWER LIMITED WIRING .................. 8 MAINTENANCE AND TESTING ................9 TROUBLESHOOTING THE SYSTEM ..............9 Technical Manuals Online! - http://www.tech-man.com...
Page 3
SPECIFIC PR-24 MODULE SUPERVISORY TROUBLE BATTERIES INDICATORS INDICATORS ON FRONT COVER (VISIBLE WITH DOOR CLOSED) 2A AC INPUT CIRCUITBREAKER SERVICE SELECTION JUMPER PLUG P72 (LOCAL) OR P12 (RELEASE) PR-24 POWER PLUG GROUND DISCONNECT PLUG SIEMENS Technical Manuals Online! - http://www.tech-man.com...
Page 4
For NFPA 72 Local Service: POWER TROUBLE SUPERVISORY ALARM ZONE 1 ALARM ZONE 2 ALARM SILENCED BATTERY FAULT GROUND FAULT (ABORT TROUBLE) (MANUAL DISCHARGE TROUBLE) (AGENT DISCHARGE TROUBLE) (ZONE 1 TROUBLE) (ZONE 2 TROUBLE) (GENERAL ALARM TROUBLE) ...
ALARM SILENCE For NFPA 12A, 13, or 2001 Service: SUPERVISORY SILENCE TROUBLE SILENCE RELEASE DISCONNECT Technical Manuals Online! - http://www.tech-man.com...
Page 6
ALARM 120mA Class A or Class B. CLASS A CONNECTION 1.78K 1/2W EOL P/N 140-016124 TYPICAL CONNECTION TO FIRE ALARM SYSTEM (When CP-2ER panels are arranged for NFPA Releasing Service) CP-2ER CP-2ER ALARM TROUBLE ALARM TROUBLE BATTERIES 24 VDC Charging Current Normal: 300mA, 24 VDC...
Page 8
Position II Closed; I Open Dial setting Switch S101 Rotate to change setting Dial Discharge Delay Setting Period (seconds) Position I Closed; II Open Position II Closed; I Open Position I Closed; II and Ill Open Position II Closed; I and Ill Open Position III Closed;...