Configuration Examples For Fibre Channel Interfaces; Configuration Example For Fec Module Interfaces - Cisco MDS 9000 Series Configuration Manual
Interface
Hide thumbs
Also See for MDS 9000 Series:
- Command reference manual (1464 pages) ,
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages)
Table of Contents
Advertisement
Configuration Examples for Fibre Channel Interfaces
Configuration Examples for Fibre Channel Interfaces
Configuration Example for FEC Module Interfaces
These steps describe how to configure FEC module interfaces:
Step 1
Select the interfaces fc 4/1 through fc 4/2.
Example:
switch# configure terminal
switch(config)# interface fc 4/1 - 2
Step 2
Configure the FEC on the interfaces.
Example:
switch(config-if)# switchport speed 16000
switch(config-if)# switchport fec
Step 3
Enable the interfaces and return to configuration mode.
Example:
switch(config-if)# no shutdown
switch(config-if)# exit
Step 4
Select the interfaces fc 4/3 through fc 4/4.
Example:
switch# configure terminal
switch(config)# interface fc 4/3 - 4
Step 5
Configure the port speed, rate mode, and port mode on the interfaces.
Example:
switch(config-if)# switchport speed 16000
switch(config-if)# switchport fec
Cisco MDS 9000 Series Interfaces Configuration Guide, Release 8.x
106
Configuring Fibre Channel Interfaces
- Quick Links:
- E Port
- Configuring Isl between Two Switches
Hide quick links:
Advertisement
Table of Contents
