Table of Contents
Advertisement
Mounting the Access Point
Materials Required to Mount Access Point to a Vertical Wall In Kit
Two stainless steel band clamps (adjustable 2"–5", 51 mm –
127 mm)
Two stainless steel band clamps(adjustable 5"–8", 127 mm –
203 mm)
Crimping tool for ground lug, Panduit CT-720 with CD-720-1
die
(http://www.panduit.com)
Four wall mounting screws
Four wall anchors (specified for all material)
Drill bit for wall anchors
Electric drill and standard screwdriver
#6 AWG ground wire
Shielded outdoor-rated Ethernet (CAT5e or better) cable
Grounding block
Grounding rod
10-mm box-end wrench or socket set
Caution
To mount the access point on a vertical wall, follow these instructions:
Use the mounting bracket as a template to mark four screw hole locations on the mounting surface.
Step 1
See
Figure 2-4
the unit to the wall.
Cisco Aironet 1530 Series Outdoor Access Point Hardware Installation Guide
2-12
The mounting surface, attaching screws and optional wall anchors must be able to support a
50-lb (22.7 kg) static weight.
for the mounting bracket screw hole locations. Use the mounting slotted holes to attach
Chapter 2
Installing the Access Point
Yes
Yes
No
No
No
No
No
No
No
No
No
No
OL-30864-01
Hide quick links:
Advertisement
Table of Contents
