Gigabit Ethernet - Cisco IR829 Hardware Installation Manual
Industrial integrated services router
Hide thumbs
Also See for IR829:
- Product manual (16 pages) ,
- Hardware installation manual (56 pages) ,
- Hardware installation manual (87 pages)
Table of Contents
Advertisement
Installation Instructions
2
3
4
Perform the following steps in order in install the module.
1. Remove the 4 screws holding the cover over the Limited Modularity Slot. If you are replacing an existing
module, set them aside for later use to attach the new module. If this is the first time you are installing a
module, use the screws provided with the module.
2. Insert the mSATA SSD module into the slot on the IR829. The module slides in with the IR829 metal guide
rail in between the mSATA SSD bottom plate and the mSATA SSD PCB.
Refer to
Figure 23: Module Placement, on page 52
Figure 23: Module Placement
3. Ensure that the placement of the mSATA SSD module is correct. An incorrect installation can damage the
module or the IR829. Refer to the three detailed figures
Figure 25: Module Placement (Detail 2), on page
54
to assist in proper positioning.
Cisco IR829 Industrial Integrated Services Router Hardware Installation Guide
52
mSATA SSD Slot
6
Gigabit WAN (SFP)
7
Gigabit Ethernet
8
LAN/PoE (RJ45)
for the placement of the module.
Figure 24: Module Placement (Detail 1), on page
53, and
mSATA Module Installation
USB 2.0 type-A Port
Power Input, Battery, and
Ignition connector. Refer
to the DC Power section
for pin-outs.
WLAN ANT 0
2.4/5.0GHz
Figure 26: Module Placement (Detail 3), on page
53,
Advertisement
Table of Contents
