Verifying The 802.1X Configuration; 802.1X Support For Vxlan Evpn; Guidelines And Limitations For 802.1X Support For Vxlan Evpn - Cisco Nexus 9000 Series Configuration Manual
Nx-os security configuration guide, release 9.x
Hide thumbs
Also See for Nexus 9000 Series:
- Configuration manual (276 pages) ,
- Troubleshooting manual (126 pages) ,
- Quick start configuration manual (6 pages)
Table of Contents
Advertisement
Configuring 802.1X
Verifying the 802.1X Configuration
To display 802.1X information, perform one of the following tasks:
Command
show dot1x
show dot1x all [details | statistics | summary]
show dot1x interface ethernet slot/port
[details | statistics | summary]
show running-config dot1x [all]
show startup-config dot1x
For detailed information about the fields in the output from these commands, see the Cisco NX-OS Security
Command Reference for your platform.
802.1X Support for VXLAN EVPN
Guidelines and Limitations for 802.1X Support for VXLAN EVPN
The following are the guidelines and limitations for 802.1X support for VXLAN EVPN:
• Port channel interfaces or the member ports of the port channel are not supported.
• vPC ports are not supported.
• The current support of the feature uses regular and dynamic EVPN updates on the BGP-EVPN control
• Ensure that the "dot1x mac-move" policy is configured the same across the fabric. There is no
• The local to remote MAC moves behavior for the deny and permit modes is permitted. Therefore, the
• Ensure that the dot1x and the port-security ports use different VLANs. The same VLAN cannot be
• Dot1x is not VLAN aware and hence having the same MAC in two different VLANs is not possible.
plane for 802.1X secure MAC updates. As a result, we cannot prevent the move across EVPN even if
the global policy is "dot1x mac-move deny."
configuration validation across the nodes, hence it could lead to unexpected behavior if the configuration
policy is not in sync.
MAC move is permitted even if the deny mode is enabled.
assigned to both ports.
Depending on the mac-move mode selected, either the MAC will be moved to a new VLAN or it will
be denied.
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
Purpose
Displays the 802.1X feature status.
Displays all 802.1X feature status and configuration
information.
Displays the 802.1X feature status and configuration
information for an Ethernet interface.
Displays the 802.1X feature configuration in the running
configuration.
Displays the 802.1X feature configuration in the startup
configuration.
Verifying the 802.1X Configuration
205
- Quick Links:
- Radius and Tacacs+ Security Protocols
Hide quick links:
Advertisement
Table of Contents
