Cisco Asr 1000 Series Aggregation Services Routers Sip And Spa Software Configuration Guide, Cisco Ios - Cisco ASR 1000 Series Software Configuration Manual
Aggregation services routers sip and spa, cisco ios xe everest 16.5
Hide thumbs
Also See for ASR 1000 Series:
- Configuration manual (442 pages) ,
- Replacing (120 pages) ,
- Common criteria operational user guidance and preparative procedures (72 pages)
Table of Contents
Advertisement
Troubleshooting the Serial SPAs
Status Line Condition
OL-14127-17
Possible Problem
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Serial Lines: show interfaces serial Status Line Conditions
Solution
in the local router.
7 If you suspect faulty router
hardware, change the serial line
to an unused port. If the
connection comes up, the
previously connected interface
has a problem.
First enable per-interface
Note
debugging using the
command debug interface
serial x, and depending on
the encapsulation, enable
the corresponding debug:
For HDLC: debug serial
interface For PPP: debug
ppp negotiation For FR:
debug frame-relay lmi
Caution
Because debugging
output is assigned high
priority in the CPU
process, it can render
the system unusable.
For this reason, use
debug commands only
to troubleshoot specific
problems or during
troubleshooting sessions
with Cisco technical
support staff. Moreover,
it is best to use debug
commands during
periods of lower
network traffic and
fewer users. Debugging
during these periods
decreases the likelihood
that increased debug
command processing
overhead will affect
system use.
Everest 16.5
329
Advertisement
Chapters
Table of Contents
Troubleshooting
