Encapsulation Configuration Example
The following example shows how to configure the Port 0 of the 8-Port Clear-Channel T3/E3 SPA to be a
T3 port with m13 framing:
Router(config)# interface serial 2/1/0
Router(config-if)# framing m13
The following example shows how to configure the Port 1 of the 8-Port Clear-Channel T3/E3 SPA to be a
E3 port with g832 framing:
Router(config)# interface serial 2/1/1
Router(config-if)# framing g832
Encapsulation Configuration Example
The following example shows how to configure encapsulation on interface port 1 on slot 2, subslot 1:
! Specify the serial interface and enter interface configuration mode
!
Router(config)# interface serial 2/1/1
!
! Specify the encapsulation method
!
Router(config-if)# encapsulation PPP
Cable Length Configuration Example
The following example shows how to set the cable length to 200 feet:
! Enter global configuration mode
!
Router# configure terminal
!
! Specify the serial interface and enter interface configuration mode
!
Router(config)# interface serial 2/1/3
!
! Specify the cable length
!
Router(config-if)# cablelength 200
Invert Data Configuration Example
The following example shows how to enable invert data:
! Enter global configuration mode
!
Router# configure terminal
!
! Specify the serial interface and enter interface configuration mode
!
Router(config)# interface serial 2/1/3
!
! Enable invert data
!
Router(config-if)# invert data
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
274
Configuring the 2-Port and 4-Port T3/E3 Serial SPA
OL-14127-17