Configuring Icap Interface Support; Creating Icap Server Group And Address Binding - Cisco ASR 5000 Administration Manual
Ip services gateway
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (294 pages) ,
- Installation procedure (8 pages)
Table of Contents
Advertisement
ICAP Interface Support
Configuring ICAP Interface Support
This section describes how to configure the Content Filtering Server Group (CFSG) through Internet Content
Adaptation Protocol (ICAP) interface between ICAP client and ACF server (ICAP server).
Important:
on ICAP interface on the system. For more information on commands that configure additional parameters and options,
refer to CFSG Configuration Mode Commands chapter in Command Line Interface Reference.
To configure the system to provide ICAP interface support for external content filtering servers:
Step 1
Create the Content Filtering Server Group and create ICAP interface with origin (local) IP address of chassis by
applying the example configuration in the
Step 2
Specify the active content filtering server (ICAP server) IP addresses and configure other parameters for ICAP server
group by applying the example configuration in the
Step 3
Configure the content filtering mode to external content filtering server group mode in ECS rule base by applying the
example configuration in the
Step 4
Optional. Configure the charging action to forward HTTP/RTSP/WAP GET request to external content filtering servers
on ICAP interface in Active Charging Configuration mode by applying the example configuration in the
Charging Action for ICAP Server Group
Step 5
Verify your ICAP interface and external content filtering server group configuration by following the steps in the
Verifying the ICAP Server Group Configuration
Step 6
Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command
save configuration
System Administration Guide and the Command Line Interface Reference.
Creating ICAP Server Group and Address Binding
Use the following example to create the ICAP server group and bind the IP addresses:
configure
context <icap_ctxt_name> [ -noconfirm ]
content-filtering server-group <icap_svr_grp_name> [ -noconfirm ]
origin address <ip_address>
end
Notes:
<ip_address>
OL-27210-02
This section provides the minimum instruction set for configuring external content filtering servers
Creating ICAP Server Group and Address Binding
Configuring ECS Rulebase for ICAP Server Group
section.
. For additional information on how to verify and save configuration files, refer to the
is local IP address of the CFSG endpoint.
Configuring ICAP Server and Other Parameters
section.
Cisco ASR 5000 IP Services Gateway Administration Guide ▄
Configuring ICAP Interface Support ▀
section.
section.
section.
Configuring
143
Advertisement
Table of Contents
