Cisco 300 Series Administration Manual page 143

Managed switch

Hide thumbs Also See for 300 Series:

Table of Contents

System Name TLV

System Name—System name of the device.

Address1-3—IP addresses (advertised in the device address TLV).

Port ID—Identifier of port advertised in the port TLV.

Capabilities TLV

Capabilities—Capabilities advertised in the port TLV)

Version—Information about the software release on which the device is

Platform TLV

Platform—Identifier of platform advertised in the platform TLV.

Native VLAN TLV

Native VLAN—The native VLAN identifier advertised in the native VLAN

Full/Half Duplex TLV

Duplex—Whether port is half or full duplex advertised in the full/half

Appliance TLV

Appliance ID—Type of device attached to port advertised in the

appliance TLV.

Appliance VLAN ID—VLAN on the device used by the appliance, for

instance if the appliance is an IP phone, this is the voice VLAN.

Extended Trust TLV

Extended Trust—Enabled indicates that the port is trusted, meaning that

the host/server from which the packet is received is trusted to mark the

packets itself. In this case, packets received on such a port are not re-

marked. Disabled indicates that the port is not trusted in which case, the

following field is relevant.

Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)

Administration: Discovery

Configuring CDP