Cisco SF 300-08 Administration Manual page 304
Cisco small business 300 series managed switch
Hide thumbs
Also See for SF 300-08:
- Quick start manual (72 pages) ,
- Datasheet (14 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Configuring SNMP
Notification Recipients
STEP 4
Cisco Small Business 300 Series Managed Switch Administration Guide
•
Recipient IP Address—Enter the IP address of where the traps are sent.
•
UDP Port—Enter the UDP port used to for notifications on the recipient
device.
•
User Name—Enter the user to whom SNMP notifications are sent.
•
Security Level—Select how much authentication is applied to the packet.
The options are:
-
No Authentication—Indicates the packet is neither authenticated nor
encrypted.
-
Authentication—Indicates the packet is authenticated but not encrypted.
-
Privacy—Indicates the packet is both authenticated and encrypted.
•
Notification Type—Select whether to send traps or informs. If both are
required, two recipients must be created.
•
Notification Filter—Select to enable filtering the type of SNMP notifications
sent to the management station. The filters are created in the Notification
Filter Page.
•
Filter Name—Select the SNMP filter that defines the information contained
in traps (defined in the Notification Filter Page).
•
(Inform) Timeout—Enter the amount of time (seconds) the device waits
before re-sending informs/traps. Timeout: Range 1-300, default 15
•
(Inform) Retries—Enter the number of times that the device resends an
inform request. Retries: Range 1-255, default 3
Click Apply. The SNMP Notification Recipient settings are defined, and the switch
is updated.
19
293
Hide quick links:
Advertisement
Table of Contents
