hit counter script

Advertisement

1. SPECIFICATIONS .............................. 2
2. ACCESSORIES ................................. 2
3. AUTOMATIC ICE MAKING .................. 3
1. PART NAMES .................................... 4
2. INTERNAL STRUCTURE ..................... 5
3. FLOW OF COOL AIR ........................... 6
2. INNER DIMENSIONS ........................... 9
1. WIRING DIAGRAM .............................. 10
2. MODE FOR DISPLAY ........................... 14
1. R600A PRECAUTIONS ........................ 15
SERVICE MANUAL
Refrigerator-freezer
MODEL
Refrigerant; R600a
Refer to "REFRIGERATING-CYCLE REPAIR MANUAL" for handling this refrigerant.
CONTENTS
1. SELF-DIAGNOSIS MODE ..................... 18
9. MAIN PARTS ASSEMBLY ..................... 35
Parts Guide
No.S0310SJF60XTFT
SJ-GF60X-T
DESTINATION
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
F

Advertisement

Table of Contents
loading

Summary of Contents for Sharp SJ-GF60X-T

  • Page 1: Table Of Contents

    SERVICE MANUAL No.S0310SJF60XTFT Refrigerator-freezer MODEL SJ-GF60X-T DESTINATION Refrigerant; R600a Refer to "REFRIGERATING-CYCLE REPAIR MANUAL" for handling this refrigerant. CONTENTS [1] PRODUCT SPECIFICATIONS 3. REFRIGERATION CYCLE DIAGRAM …… 15 1. SPECIFICATIONS ………………………… 2 4. REPAIR OF THE REFRIGERATION CYCLE … 17 2.
  • Page 2: Product Specifications

    SJGF60XT PRODUCT SPECIFICATIONS SPECIFICATIONS Item SJ-GF60X-T Rated voltage/Rated frequency 110V ~ 60Hz Rated input Rated power input of heating systems Defrosting input Defrosting heater input Outer dimensions (mm) 750 x 728 x 1820 Width×Depth×Height Rated total storage volume 601L (21.2 cu.ft.) Refrigerator compartment 315L (11.13 cu.ft.)
  • Page 3: Automatic Ice Making

    SJGF60XT Freezer compartment (Upper) Freezer case (Upper) Stainless tray Freezer compartment (Lower) Freezer case (top) Freezer case (bottom) Ice compartment Ice storage box Noise-proof sheet Ice scoop Vegetable compartment Vegetable case Fruit case Pet case Stainless tray Other Accessories and Printed Materials Foot grille Operation manual Warranty card...
  • Page 4: Designation Of Various Parts

    SJGF60XT [2] DESIGNATION OF VARIOUS PARTS PART NAMES Parts names in parentheses "[ ]" are denominations used in the Operation manual. Plasmacluster unit Cool plate R shelf Door pocket(left) Door pocket(right) Free set shelf(left) Free set shelf(right) Case Egg case Chilled case Egg tray C case tray...
  • Page 5: Internal Structure

    SJGF60XT INTERNAL STRUCTURE...
  • Page 6: Flow Of Cool Air

    SJGF60XT FLOW OF COOL AIR Flow of Cool air Refrigerator compartment Freezer compartment (upper) Ice compartment Freezer compartment (lower) Vegetable compartment Side view Front view When Plasmacluster ion is in operation. Refrigerator compartment Freezer compartment (upper) Ice compartment Freezer compartment (lower) Vegetable compartment...
  • Page 7: Temperature Distribution

    SJGF60XT TEMPERATURE DISTRIBUTION Approx.2 5°C Approx.3 7°C Approx.3 7°C Approx.0 2°C Approx.-17 -19°C Approx.-18 -20°C Approx.-18 -20°C Approx.3 8°C ● The temperatures above are indications under the condition of no   food inside, doors closed and surrounding temperature is 30 after stabilized the inside temperature.
  • Page 8: Dimensions

    SJGF60XT [3] DIMENSIONS OUTER DIMENSIONS AND CLEARANCE (UNIT:mm) More than More than More than More than 691.5 Moving wheels back side 732.5 Moving wheels front side 697.5 Adjustable feet 691.5...
  • Page 9: Inner Dimensions

    SJGF60XT INNER DIMENSIONS • The dimensions between shelves can be changed by setting the shelves on the other rails.
  • Page 10: Electrical Circuit Diagrams

    SJGF60XT [4] ELECTRICAL CIRCUIT DIAGRAMS WIRING DIAGRAM Compressor Protector Door Door switch switch Terminal box (left) (right) (left) motor g Reactance Indicator Source cord Plasmacluster unit Motor EECON-INV (right) Valve turret Humidity sensor Main PWB D-fan motor PCI motor f F thermistor F proximity switch...
  • Page 11: Electric Accessories Layout

    SJGF60XT ELECTRIC ACCESSORIES LAYOUT...
  • Page 12: Precautions For Using Lead-Free Solder

    SJGF60XT PRECAUTIONS FOR USING LEAD-FREE SOLDER 1) Employing lead-free solder The PWB of this model employs lead-free solder. This is indicated by the "LF" symbol printed on the PWB and in the service manual. The suffi x letter indicates the alloy type of the solder. Example: Indicates lead-free solder of tin, silver and copper 2) Using lead-free wire solder...
  • Page 13: Electrical System Specifications

    SJGF60XT [5] ELECTRICAL SYSTEM SPECIFICATIONS FUNCTIONAL PART SPECIFICATIONS Part Name Specifi cations Function Model No.: 4715JL-09W-S37-GF8 Fan motor F For cooling Rating: DC15V (F fam motor) (For freezer compartment) Power Input: 1.05W (Vs:2.6V) Model No.: D08A-12PM Fan motor For cold air circulation Rating: DC12V (R fam motor) (For refrigerator compartment)
  • Page 14: Mode For Display

    SJGF60XT MODE FOR DISPLAY 2-1. How to set the product in this mode • Open the doors of the refrigerator compartment and the ice compartment within 2 minutes after turning ON the power to the main unit, and press and hold the [ 戻る ] button for 5 seconds or longer. 2-2.
  • Page 15: Refrigeration Cycle System Specifications

    SJGF60XT [6] REFRIGERATION CYCLE SYSTEM SPECIFICATIONS R600A PRECAUTIONS •Do not use any refrigerant other than R600a. •Gas leak testers for HFC-134a, CFC-12, HCFC-22, etc., cannot be used. •A special tool is used for the R600a cycle. TABLE OF R600A CHARACTERISTICS Refrigerant saturated vapor pressure table R600a (Unit) Temperature: °C, Pressure: kgf/cm abs Temperature...
  • Page 16: Schematic Diagram

    SJGF60XT 3-2. Schematic diagram Side Back condenser Side condenser L condenser R Dryer Bottom condenser condenser Charge pipe Value turret kit (High presure side) Extra cond. unit Extra cond. unit kit Discharge pipe kit Suction connector Suction pipe Evaporator Charge pipe Compressor (Low presure side) 3-3.
  • Page 17: Repair Of The Refrigeration Cycle

    SJGF60XT 3-4. Specifi cations of Refrigerant Valve Operation Modes and operating conditions of refrigerant valve (3-way valve) Valve is fully closed: • This mode is used in compressor OFF status. Only fine capillary is opened: • During normal cooling operation Only wide capillary is opened: •...
  • Page 18: Troubleshooting

    SJGF60XT [7] TROUBLESHOOTING SELF-DIAGNOSIS MODE 1-1. Outline • The self-diagnosis mode stores fault data for 5 days in the past (including “today”), and displays them by the date in the order of occurrence. Self-diagnosis data to be displayed Storage of self-diagnosis result Current fault Fault history All faults that have currently occurred...
  • Page 19 SJGF60XT Operation in the self-diagnosis mode • The compressor is forcedly turned ON. (Excepting a period of defrosting operation and compressor ON delay time) • The cooling, condenser and R-fan motors are forcedly turned ON. (These motors will be forcedly turned ON even while the compressor is OFF. However, when the door is opened, the motors other than the condenser fan motor are kept OFF.) •...
  • Page 20 SJGF60XT <Example of button operations and self-diagnosis display> * During self-diagnosis mode input, the “current” fault is displayed. Press Press Press [During mode input] [メニュー決定]. [メニュー決定]. [メニュー決定]. “1-day before” “2-day before” “Current” fault “Current” fault history fault history fault history Press Display of the Display of the fault...
  • Page 21 SJGF60XT 1-3. Self-diagnosis display [Table 1] (Problems and problem history related to thermistors, fan motors, auto ice cube maker, inverter,etc.) indicates a problem, indicates the status. Lamp indication: Lit = , Blinking = (0.5-sec. ON/0.5-sec. OFF) Buzzer: Only when a fault is indicated in the current fault display, the buzzer continuously sounds (0.2-sec. ON/1.8-sec. OFF). Lamp indication (Temperature control LED) ExplanationofStatuses Description...
  • Page 22: Forced Stopping Of Door Alarm Buzzer

    SJGF60XT FORCED STOPPING OF DOOR ALARM BUZZER * Used when the door switch is faulty. How to stop • While the door-open buzzer sounds, press the [ ] and [ ] buttons simultaneously and hold them for 3 seconds or ▼...
  • Page 23: Inspection Flowchart And Repair Items

    SJGF60XT INSPECTION FLOWCHART AND REPAIR ITEMS • During check of the PWB circuits, use thorough caution not to get electric shock. • To check resistance of electric parts, be sure to disconnect the power supply plug. (Turn OFF the power supply.) Problem Self-diagnosis display Check/inspection point...
  • Page 24 SJGF60XT Problem Self-diagnosis display Check/inspection point Action on error detection R-thermistor fault 1) Connector insertion check (Main PWB, intermediate 1) Correct the installation. connector) 2) Replace the thermistor. 2) Thermistor resistance check (Check the value in the 3) Replace the main PWB. thermistor characteristic table.) 3) If the above check results are normal: R-fan motor fault...
  • Page 25: Plasmacluster Ok/Ng Judgment

    SJGF60XT PLASMACLUSTER OK/NG JUDGMENT Judgment procedure Disconnect the power supply, and keep the refrigerator compartment door opened for 5 minutes or longer to raise the temperature in the refrigerator compartment. After closing the refrigerator compartment door, connect the power supply, and turn ON the plasmacluster. (When the plasmacluster is turned ON, the blue LED in the compartment and plasmacluster [ クリーン...
  • Page 26: Disassembly/Assembly

    SJGF60XT [8] DISASSEMBLY/ASSEMBLY GENERAL DISASSEMBLY SEQUENCE Refrigerator compartment Accessories (Shelves・Chilled case・Water tank) Partition support・C-shelf ass’y Duct RT ass’y R-shower duct ass’y PCI box ass’y R-C box ass’y・Connector cover R Pipe cover Freezer compartment Accessories Freezer cases) (Ice storage box・ 2-1-2 SW cover (When replacing F proximity switch) 2-1-2...
  • Page 27: Refrigerator Compartment Disassembly

    SJGF60XT REFRIGERATOR COMPARTMENT DISASSEMBLY Main component Contained parts RC box ass’y Gear pump, R-thermistor, fan motor Pipe cover R-shower duct ass’y Catalyzer D-PCI box ass’y Plasmacluster unit, indicator PWB K-GF60X, D-fan motor PCI, Motor, O catalyzer Remove the accessories (shelf, chilled case, etc.). Unhook three claws at the back and pull out the protrusions in front.
  • Page 28 SJGF60XT Remove duct RT rivet, and remove duct RT cover. Pull it downward to raise it. (If it is stuck, insert a fl athead screwdriver to raise it.) Duct RT cover Duct RT rivet □ D-PCI box ass’y : claw ○...
  • Page 29: Freezer Compartment/Ice Compartment Disassembly

    SJGF60XT Pull out the pipe cover. Remove the damper. □ : claw Damper Pipe cover FREEZER COMPARTMENT / ICE COMPARTMENT DISASSEMBLY Main component Contained parts Ice maker ass'y T-SK Ice maker thermistor, Ice maker ass'y, Ice cube heater, I-grill, Ice sensor, Ice cube maker C-part.
  • Page 30 SJGF60XT • Remove the C-part. FI-FK. Top of the EV cover (When replacement of F-LED PWB ass’y) □ Remove three screws and one claw, and push the : claw PWB backward. : screw EV cover ass’y C-part. FI-FK Remove the Heater. (Replacement procedure) CAUTION: The heater is a charged and heating part.
  • Page 31: How To Remove Op. Pwb Ass'y

    SJGF60XT Remove the aluminum tape that fastens the lead HOW TO REMOVE OP. PWB ASS'Y wire to the drip tray. Insert a thin flathead screwdriver (or a steel scale) into the slot at the back of the PWB cover to unhook Screw Heater AL Screw...
  • Page 32: How To Install R-Sub Packing

    SJGF60XT HOW TO INSTALL R-SUB PACKING Attach the R-sub packing sealer to the R-door L-ass'y only. Provide a clearance so that the R-sub packing sealer will not protrude from the door packing. (The hole edge is the reference position.) Reference Center R-sub packing sealer Hole...
  • Page 33: How To Install Duct Rt Ass'y Cover

    SJGF60XT HOW TO INSTALL DUCT RT ASS'Y COVER Insert two claws (located in the center) of the Duct RT ass'y cover into the holders at the ceiling inside the refrigerator compartment. 2. After inserting two claws at the right and left side into the holders, tuck the Duct RT rivets into the holders. ①...
  • Page 34: Adjustment Of R-Door(Double Door)

    SJGF60XT ADJUSTMENT OF R-DOOR(DOUBLE DOOR) If the right and left door positions are different: Adjustment with the adjustable legs: • When the right door is lower than the left one, extend the adjusting legs on the right side (until the adjusting legs on the opposite side slightly leave the fl oor surface). •...
  • Page 35: Main Parts Assembly

    SJGF60XT MAIN PARTS ASSEMBLY EV cover ass’y <Components> A-sealer EV. cover C A-sealer EV. cover A Fan motor F EV.cover sealer N A-sealer DEF-thermistor A-sealer EV. cover E F-thermistor A-sealer EV. cover B L-band c EV.cover AL EV.cover EV-insulation A A-sealer EV.
  • Page 36 SJGF60XT EV-insulation A / EV-insulation B Assembly • Attach the A-sealer EV. cover B and A-sealer EV. cover D. • Fasten these parts with paper tape. A-sealer EV. cover B EV-insulation B Start of sealing Paper tape Overlapped Paper tape Apply tape along the edge.
  • Page 37 SJGF60XT Mounting the fan louver • Mount the DEF-thermistor, and fasten the harness of the fan motor F and the DEF-thermistor with the L-band C. • Wind the EV. cover sealer N on the lead wire of the DEF-thermistor and the fan motor F. •...
  • Page 38 SJGF60XT R-shower duct ass’y <Components> A-sealer R-S duct B R-shower duct cover T A-sealer R-S duct C Cool plate Center cover L R shower duct insu Center cover R R-shower duct cover B Catalyzer <Assembling procedure> Attach the A-sealer R-S duct B to the R-shower duct cover T. Attach A-sealer R-S ducts C to the R shower duct insu.
  • Page 39 SJGF60XT Mount R-shower duct covers B to the cool plate. (Apply the claw securely.) Insert the R shower duct insu. of Step 2 in the cool plate of Step 3. Mount the center covers L and R. (Apply the claw to the insulation securely.) Insert the catalyzer.
  • Page 40 SJGF60XT RC box ass’y <Components> Joint pipe Joint packing Packing holder A-sealer R-FM-S Fan motor Gear pump A-sealer RCBOX A A-sealer RCBOX B R-C box insu.A R-C box insu.B R-thermistor R-C box <Assembling procedure> Insert the joint packing in the gear pump. •...
  • Page 41 SJGF60XT Fasten the packing holder to the assembly of Step 2 with two screws. • Tightening torque is 3.5 to 4.5 kgf/cm (0.34 to 0.44 Nm). • Insert the gear pump harness in the groove of the R-C box, and bend the R-C box hinge so that the Claw is securely engaged.
  • Page 42 SJGF60XT Insert the R-C box insu. B in the assembly of Step 6, and fasten it with tape. • Insert the R-C box insu. B securely to the innermost position, and fasten it with two pieces of paper tape (width: 30 mm) R-C box insu.A Fan motor R-C box insu.A...
  • Page 43 SJGF60XT C-part. FI-FK <Components> C-part.FI-FL Proximity switch C insu. FI C-part. FI-FR A-sealer FIA A-sealer FIC A-sealer FIB A-sealer FI <Assembling procedure> Put the A-sealer on the C insu. FI. Put it on so that there is no space between the sealer and the insulation. Start of sealing Start of sealing...
  • Page 44 SJGF60XT Mount the assembly of Step 1 to the assembly of Step 2. C-part.FI-FL C insu.FI Attach the C-part. FI-FR to the assembly Step 3 and screw it on. • Put the A-sealer FIA, B and C. Sealing standard A-sealer FIA C-part.FI-FL Sealing standard C-part.FI-FR...
  • Page 45 SJGF60XT D-PCI box ass’y <Components> A-sealer D PCI box A D-damper holder Motor A-sealer PCI fan A-sealer d-damper B Plasmacluter unit D-damper flap O catalyzer D-fan motor PCI Plate A-sealer d-damper A Absorbent rubber A Absorbent rubber B D-PCI cover Indicator PWB K-GF60X D-PCI box ass’y <Assembling procedure>...
  • Page 46 SJGF60XT Attach A-sealer D-damper A and B. • Attach A-sealer D-damper A and B to the D-damper flap. D-damper flap D-damper flap A-sealer d-damper A When attaching A-sealer D-damper B, do not cover the rib of the D-damper flap When attaching A-sealer D-damper A, periphery.
  • Page 47 SJGF60XT Mount the assembly of Step 3 and the D-PCI fan cover to the assembly of Step 4, and attach A-sealer PCI box. D-PCI cover Hook the claw on the D-PCI box to the D-PCI cover (at 1 place). A-sealer D-PCI box A A-sealer D-PCI box A Hook the claw on the D-PCI box...
  • Page 48 SJGF60XT Ice maker ass’y T-SK <Components> I-grill Ice cube maker Ice cube tray AT Harness cover Ice maker ass’y Thermistor Thermistor cover Sealer Plate Ice cube heater Ice senser Ice heater cover T L-band C <Assembling procedure> Put Thermistor on back side of Ice cube tray AT. •...
  • Page 49 SJGF60XT Cover Ice cube tray AT with Ice heater cover T. * Set Ice heater cover T so as to " " marking side is on axis of Ice cube tray AT. * Tightening toruque is 0.5N•m. Marking “ ” Ice heater cover T Screw Axis...
  • Page 50 SJGF60XT Get the harness of the ice make thermistor in the assembly Step 5 through the holes in front of and at the back of the I-grill. • Make sure to keep the end face of the protective tube next to the ice cube tray covered with the ice heater cover T. (Do not pull the harness strongly.) Ice cube tray AT Ice maker ass’y harness...
  • Page 51 SJGF60XT Bundle the harness with the L band C and fix it to the I-grill. (1) Bundle the ice maker thermistor and the protective tube of the ice cube heater with the L band C and fi x them to the I-grill.
  • Page 52 SJGF60XT Fruit case ass'y <Components> K handle K handle cover K lock spring K handle cover label K lock rever Fruit case K handle support K handle arm K handle base Lock unit <Assembling procedure> Install the K handle arm and K lock rever to the K handle base. K handle arm K lock rever K handle base...
  • Page 53 SJGF60XT Combine assembly Step 1 and Step 2. Insert the claw A to the form B firmly. Confi rm that the tip of the K lock spring is inserted into the cross rib of the K lock lever. K lock spring K lock rever Claw A Claw A...
  • Page 54 SJGF60XT Hook assembly Step 5 to the fruit case and rotate it. Be careful not to scratch parts against others. Fruit case Put the dent of K handle base from the bottom to the convex of fruit case. Hook two claws on the K handle base to the fruit case. Make sure to insert them properly. Fruit case K handle base Two claws...
  • Page 55 SJGF60XT Fan motor G ass’y <Components> W-sealer-g fan Fan motor G W-sealer-g fan W-sealer-g fan hnss <Assembling procedure> Attach the W-sealer G fan to the fan motor G. • When attaching the W-sealer G fan, do not stretch it strongly. Attach the W-sealer G fan harness.
  • Page 56: Parts List

    PARTS LIST Refrigerator-freezer MODEL SJ-GF60X-T CONTENTS SJ-GF60X-T DOOR SJ-GF60X-T CYCLE SJ-GF60X-T CABINET1 SJ-GF60X-T OTHER PARTS SJ-GF60X-T CABINET2 INDEX SJ-GF60X-T CABINET3 This document has been published to be used for after sales service only. The contents are subject to change without notice.
  • Page 57 SJGF60XT [1] SJ-GF60X-T DOOR 5-39 3-19 3-15 3-11-2 3-11 5-12 3-11-3 1-3-2 3-12 3-17-2 3-17-3 3-18 5-38 3-40 3-15 3-13 5-36 3-17 5-40 5-35 5-37 3-28 3-11-1 5-16 3-35 5-23 5-16-1 5-16-2 5-23 3-17-1 3-39 3-37 5-22 5-25 5-17 5-24...
  • Page 58 SJGF60XT PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [1] SJ-GF60X-T DOOR DPWB-A307CBKZ Op. Pwb ass'y 1-3-2 LHLD-A982CBFA Op. Pwb holder DFRM-A133CBKZ F-frame ass'y FDORFC366CBKZ F-door ass'y PPACGA340CBZA F-sub packing PPACGA341CBZA F-sub packing DFRM-A134CBKZ F-t frame ass'y 3-5-1 LFRM-A457CBTA Fi frame l...
  • Page 59 SJGF60XT PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [1] SJ-GF60X-T DOOR 5-40 PPACGA387CBFA C case packing 5-41 UYOK-A768CBFA Fruit case 5-42 FYOK-A352CBKZ Fruit case ass'y...
  • Page 60 SJGF60XT [2] SJ-GF60X-T CABINET1 2-105 5-4-3 5-4-2 2-104 2-25 2-23 1-31 2-23-5 5-4-1 4-15 2-140 2-14 2-22 2-23-2 5-4-4 2-23-4 2-145 2-101 2-16 5-4-6 2-15 4-10 2-24 2-17 2-23-3 5-4-5 2-101 2-138 4-10 1-26 2-90 2-81 1-23 2-83 2-88 1-26...
  • Page 61 SJGF60XT PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [2] SJ-GF60X-T CABINET1 RH-HXA154CBZZ Thermistor RHETBA384CBZZ Ice cube heater 1-23 QSW-LA031CBZZ Proximity switch 1-24 FACC-A176CBKZ Source cord-k 1-26 QSW-PA079CBEA Door switch 1-31 RDTC-A001CBZZ Humidity sensor ZPAPRBPCOVERY Back p cover FSRA-A308CBKZ Eva-pan assy' GCOV-A405CBPZ Comp.
  • Page 62 SJGF60XT [3] SJ-GF60X-T CABINET2 2-75 2-76 2-68 2-67 2-38 2-70 2-33 2-37 2-73 This shows the part that exchange is 1-12 necessary for a set. 2-40 2-71 2-69 2-82 1-14 2-72 2-41 This shows the part that exchange is necessary for a set.
  • Page 63 SJGF60XT PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [3] SJ-GF60X-T CABINET2 FHETBA276CBZZ Heater DTHM-A031CBKZ Damper ass'y 1-12 FGER-A015CBZZ Gear pomp 1-13 RH-HXA122CBZZ R-thermistor 1-14 RMOTRA087CBZZ Fan motor 1-15 RH-HXA113CBZZ F-thermistor 1-16 RH-HXA130CBZZ Def-thermistor 1-17 RMOTRA138CBZZ Fan motor f 1-19...
  • Page 64 SJGF60XT [4] SJ-GF60X-T CABINET3 This shows the part that exchange is necessary for a set. 2-32 2-122 1-29 2-129 2-31 2-123 2-125 2-149 1-11 2-128 2-29 2-30 2-28 1-10 2-60-4 2-27 2-60-3 2-60-1 2-60-3 2-60-2 2-60 2-133 2-133 This shows the part that exchange is necessary for a set.
  • Page 65 SJGF60XT PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [4] SJ-GF60X-T CABINET3 CKITTA216AKKZ Plasmacluster unit 1-10 FPWB-B085CBKZ Indicator pwb 1-11 RMOTRA139CBZZ D-fan motor pci 1-22 FPWB-B219CBKZ Led pwb ass'y 1-29 RMOT-A007CBZZ Motor 2-27 PCOVPA708CBFA D-pci box a'ssy 2-28 PCOVPA709CBFA D-pci cover...
  • Page 66 SJGF60XT [5] SJ-GF60X-T CYCLE 6-19 1-27 6-31 6-26 6-34 6-12 6-23 6-13 6-11 6-10 6-14 6-36 6-24 6-23 6-35 6-22 6-16 6-20 6-18 6-17 1-32 1-21 6-30 6-17 6-28 This shows the part that exchange is necessary for a set.
  • Page 67 6-31 RCORFA005CBZZ Ferrite cores 6-34 PCONMA066CBZZ Extra cond.unit 6-35 Valve installed angle LANGFA345CBPZ 6-36 LX-TZA101CBMZ Shaft screw for valve [6] SJ-GF60X-T OTHER PARTS 90-1 CPADBA216CBKZ Bottom pad ass'y 90-2 CPADBA202CBKZ Top pad ass'y 90-3 SPAKCA810CBZZ Packing case 90-6 TINS-B480CBRZ Operation manual...
  • Page 68 SJGF60XT INDEX PRICE PART PRICE PART PARTS CODE PARTS CODE RANK MARK RANK RANK MARK RANK LBND-A041CBZZ 3-2-43 [ C ] LFRM-A457CBTA 1-3-5-1 CKITTA216AKKZ 4-1-9 CPADBA202CBKZ 6-90-2 LFRM-A458CBTA 1-3-5-2 LFRM-A459CBFA 1-3-5-3 CPADBA216CBKZ 6-90-1 LFRM-A488CBFA 1-3-8-3 [ D ] LHLD-A414CBFA 3-2-33 DFIL-A012CBKZ 2-5-4-6 LHLD-A901CBFA...
  • Page 69 SJGF60XT PRICE PART PRICE PART PARTS CODE PARTS CODE RANK MARK RANK RANK MARK RANK PCOVPA710CBFA 3-2-68 PSKR-A453CBFA 2-2-100 PCOVPA711CBFA 3-2-69 PSPA-A086CBFA 2-2-101 PCOVPA712CBFA 3-2-70 PSPAFA054CBMZ 5-6-10 PCOVPA713CBFA 4-2-95 PSPAGA073CBZZ 5-6-11 PCOVPA714CBFA 4-2-96 PSPAGA076CBFZ 5-6-23 PCOVPA715CBFA 3-2-71 PSRA-A083CBFA 1-5-11 PCOVPA785CBFA 2-2-23-2 PSRA-A091CBFA 2-2-23-5...
  • Page 70 EndPage COPYRIGHT © 2013 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in retrieval systems, or transmitted in anyform or by any means, electronic, mechanical, photocopying, re- cording, or other wise, without prior written permission...

Table of Contents