Table of Contents
Advertisement
VIP2 and 100VG Port Adapters
This section describes the 100VG port adapter and its use with the VIP2 and provides the following
additional information that is specific to the 100VG port adapter and its use on the VIP2 in Cisco
7000 series and Cisco 7500 series routers:
•
•
•
- Determining Chassis Slot, Port Adapter, and 100VG AnyLAN Interface Port Numbers,
- Configuring an Interface, page 18
- Checking the Configuration, page 19
The 100VG port adapter used on the VIP2 can be installed in either port adapter slot 0 or port adapter
slot 1. Figure 6 shows two 100VG port adapters installed on a VIP2-15 or VIP2-40.
Figure 6
PA-100VG in
port adapter
Caution
each port adapter's faceplate.
page 17
VIP2-15 or VIP2-40 with Two 100VG Port Adapters (Horizontal Orientation)
Bus connector
SRAM
DIMM U5
slot 0
Port adapters have a handle attached, but this handle is not shown to allow a full view of detail on
CPU
Boot ROM
U6
U2
U4
PA-100VG AnyLAN Port Adapter Installation and Configuration
VIP2 and 100VG Port Adapters
DRAM
SIMMs
PA-100VG in
slot 1
Port adapter
handles not shown
11
Advertisement
Table of Contents
