Cisco 200 Series Administration Manual page 102
Hide thumbs
Also See for 200 Series:
- User manual (428 pages) ,
- Administration manual (337 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Managing Power-over-Ethernet Devices
Configuring PoE Properties
STEP 1
STEP 2
Cisco Small Business 200 Series Smart Switch Administration Guide
To configure PoE on the switch and monitor current power usage:
Click Port Management > PoE > Properties. The
Enter the values for the following fields:
•
Power Mode—Select one of the following options:
-
Port Limit—The maximum power limit per each port is configured by the
user.
-
Class Limit—The maximum power limit per port is determined by the
class of the device, which results from the Classification stage.
•
Traps—Enable or disable traps.
Traps on the 200 Series switches are syslog related, not SNMP related.
•
Power Trap Threshold—Enter the usage threshold that is a percentage of
the power limit. An alarm is initiated if the power exceeds this value.
The following counters are displayed:
•
Nominal Power—The total amount of power the switch can supply to all the
connected PDs.
•
Consumed Power—Amount of power currently being consumed by the PoE
ports.
•
Available Power—Nominal power - the amount of consumed power.
PoE Properties Page
10
opens.
102
Advertisement
Table of Contents
