Cisco CRS Command Reference Manual page 44
Ios xr modular quality of service command reference
Hide thumbs
Also See for CRS:
- Configuration manual (430 pages) ,
- User manual (304 pages) ,
- Manual (50 pages)
Table of Contents
Advertisement
match cos
RP/0/RP0/CPU0:router(config-subif)#dot1q vlan 2 3
RP/0/RP0/CPU0:router(config-subif)#service-policy input 2
RP/0/RP0/CPU0:router(config-subif)#
Related Commands
Command
class-map, on page 12
match access-group, on page 32
match atm, on page 34
match destination-address, on page 39
match discard-class, on page 41
match dscp, on page 44
match mpls experimental topmost, on
page 48
match precedence, on page 50
match protocol, on page 53
match qos-group, on page 56
match source-address, on page 58
match vlan, on page 60
policy-map, on page 67
set cos, on page 97
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
38
Quality of Service Commands on the Cisco IOS XR Software
Description
Defines a traffic class and the associated rules that match packets to
the class.
Identifies a specified access control list (ACL) number as the match
criteria for a class map.
Enables packet matching on the basis of the ATM operations,
administration, and maintenance (OAM) or cell loss priority (CLP).
Identifies a specific destination MAC address explicitly as a match
criterion in a class map.
Identifies specific discard class values as a match criteria for a class
map.
Identifies specific IP differentiated services code point (DSCP)
values as match criteria for a class map.
Identifies specific three-bit experimental (EXP) field values in the
topmost Multiprotocol Label Switching (MPLS) label as match
criteria for a class map.
Identifies IP precedence values as match criteria.
Identifies a specific protocol as the match criterion for a class map.
Identifies specific quality-of-service (QoS) group values as match
criteria in a class map.
Identifies a specific source MAC address as match criterion in a
class map.
Identifies selected VLAN IDs as the match criteria for a class map.
Creates or modifies a policy map that can be attached to one or more
interfaces to specify a service policy.
Sets the Layer 2 class of service (CoS) value of an outgoing packet.
OL-23235-03
Advertisement
Table of Contents
