Cisco CRS Command Reference Manual page 22
Ios xr modular quality of service command reference
Hide thumbs
Also See for CRS:
- Configuration manual (430 pages) ,
- User manual (304 pages) ,
- Manual (50 pages)
Table of Contents
Advertisement
clear qos counters interface
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The clear qos counters interface command clears all input and output QoS counters that are attached to a
specified interface, unless the input or output keyword is specified. If the input or output keyword is
specified, only counters attached to the interface in a specified direction are cleared.
The MIB counters are not reset with this command.
Task ID
Task ID
qos
Examples
The following example shows how to clear QoS counters attached to Gigabit Ethernet interface 0/1/0/9:
RP/0/RP0/CPU0:router# clear qos counters interface gigabitethernet 0/1/0/9
The following example shows how to clear output QoS counters attached to POS interface 0/7/0/3:
RP/0/RP0/CPU0:router# clear qos counters interface pos 0/7/0/3 output
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
16
Quality of Service Commands on the Cisco IOS XR Software
Operations
read, write
OL-23235-03
Advertisement
Table of Contents
