Page 1
Home Network System Smart Plug KX-HNA101FX Model No. Thank you for purchasing a Panasonic product. This document explains how to install the smart plug properly. For details about how to use the system, refer to the User’s Guide (page 11).
Table of Contents Important Information Graphical symbols for use on equipment and their descriptions .......3 About this system ......4 For your safety ......4 Important safety instructions ..5 For best performance ....5 Other information .......6 Setup Part names and functions ..8 LED indicator ......8 Setup overview ......8 Connections .......9...
Important Information Graphical symbols for use on equipment and their descriptions Symbol Explanation Symbol Explanation Alternating current (A.C.) Class P equipment (equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) Direct current (D.C.) “ON” (power) Protective earth “OFF”...
Failure to do so resulting in an accident. may cause electric shock and/or R Panasonic will not be held excessive heat resulting in a fire. responsible for damage or injury R Regularly remove any dust, etc.
RF (radio Hub location/avoiding noise frequency) energy. DECT features The hub and other compatible operate between 1.88 GHz and Panasonic devices use radio waves to 1.90 GHz with a peak transmission communicate with each other. power of 250 mW.
Important Information R For maximum coverage and Move away from the electrical noise-free communications, place appliances. your hub: – at a convenient, high, and central location with no obstructions Other information between the product and hub in an indoor environment. Routine care –...
Page 7
Important Information For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union.
Setup Indicator Status Part names and Green, Registration mode blinking slowly functions Red, blinking Smart plug is out of range of the hub Red, blinking Connected electric very quickly device is drawing too much current or wattage You can configure the smart plug so that its LED indicator does not light during normal operation.
Setup Confirm the usage area Note about connections Read the information in this R The smart plug should be connected document to confirm that the to a vertically oriented or desired usage area is suitable to floor-mounted AC outlet. Do not proper operation.
Setup Using the app Registering the When you register the smart plug by smart plug using the [Home Network] app, you can assign a name to your devices and This procedure is not required for group them by location. For more devices that were included as part of information, refer to the User’s Guide a bundle.
Guide at the web page listed below. and off remotely, even when away from home. – Sensor integration You can configure the system to turn the electric device on when a sensor is triggered. (Sensor required.) – Timer on/off www.panasonic.net/pcc/support/tel/ homenetwork/manual/...
Appendix Specifications Trademarks R Standards R iPhone and iPad are trademarks of DECT (Digital Enhanced Cordless Apple Inc., registered in the U.S. Telecommunications) and other countries. R Frequency range R Android is a trademark of Google Inc. 1.88 GHz – 1.90 GHz R Microsoft, Windows, and Internet R RF transmission power Explorer are either registered...