Cisco ASR 1002 Hardware Installation Manual page 29

Asr 1000 series

Hide thumbs Also See for ASR 1002:

Table of Contents

Cisco ASR 1002 Router Overview and Installation

Step 3

Hold the chassis in position against the mounting rails while the second person finger-tightens a screw to the rack rails

on each side of the chassis.

Step 4

Finger-tighten screws to the rack rails on each side of the chassis.

Step 5

Tighten all screws on each side to secure the chassis to the equipment rack (see the following image).

Figure 15: Cisco ASR 1002 Router on a Four-Post Rack — Front and Rear Rack-Mounting

Step 6

Use a level to verify that the tops of the two brackets are level, or use a measuring tape to verify that both brackets are

the same distance from the top of the rack rails.

What to Do Next

This completes the procedure for installing the chassis in the rack. Proceed to the

Cable-Management Bracket, on page 30

Rear rack equipment rail

Rear rack-mount bracket ear

and holes

to continue the installation.

Cisco ASR 1000 Series Router Hardware Installation Guide

Four-Post Rack Installation

Front rack-mount bracket ear

and holes

Front rack equipment rail

Attaching the

Table of Contents