Welcome Welcome to world of Motorola digital wireless communications! We are pleased that you have chosen the Motorola A1000 multimedia communicator. Camera (Point 2 Point) Two-way video conferencing Earpiece Game Key B Speakerphone Status Light Game A Key Navigation Key...
Page 5
(United States) www.motorola.ca (Canada) MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc.
RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits. Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.
Motorola-supplied or approved clip, holder, holster, case, or body harness for this phone, if available. Use of accessories not approved by Motorola may exceed RF energy exposure guidelines. If you do not use one of the...
Aircraft When instructed to do so, turn off your phone when on board an aircraft. Any use of a phone must be in accordance with applicable regulations per airline crew instructions. Medical Devices Pacemakers Pacemaker manufacturers recommend that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless phone and a pacemaker.
• Pull off the road and park before making or answering a call if driving conditions so require. Responsible driving best practices may be found in the “Wireless Phone Safety Tips” at the end of this manual and at the Motorola website: www.Motorola.com/callsmart. Operational Warnings...
Page 16
(short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. Use only Motorola original batteries and chargers. Your battery or phone may contain symbols, defined as follows:...
Parents should monitor their children's use of video game or other features that incorporate flashing lights on the phones. All persons should discontinue use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation.
European Union Directives European Union Conformance Conformance Statement Hereby, Motorola declares that this product is in compliance with • The essential requirements and other relevant provisions of Directive 1999/5/EC • All other relevant EU Directives IMEI: 350034/40/394721/9 0168 Type: MC2-41H14 The above gives an example of a typical Product Approval Number.
Note: The in-box items may vary by country. Contact 3 for more details. You can customize your communicator for maximum performance and portability. To buy Motorola Original™ accessories, contact the Motorola Customer Call Center at 1-800-331-6456 in the United States or 1-800-461-4575 in Canada.
Contact your service provider for more information. Optional Accessories This label identifies a feature that requires an optional Motorola Original™ accessory. Installing the USIM Card Your USIM (Universal Subscriber Identity Module) card contains your phone number, service details, and phonebook/message memory.
Page 21
Caution: Do not bend or scratch your USIM card. Avoid exposing your USIM to static electricity, water, or dirt. Action 1 Push down the release latch, and slide the back cover down to remove it. Release Latch 2 Slide the USIM card door toward the top, then lift upward to open.
Action 4 Close the USIM card door, then slide downward to lock, as shown on the door and in the illustration. Installing the Memory Card The memory card lets you an store multimedia files, such as audio clips, pictures, and video clips. Action 1 If back cover is on, remove it as described in the procedures.
Caution: To prevent injuries or burns, do not allow metal objects to contact or short-circuit the battery terminals. To maximize your battery’s performance: • Always use Motorola Original™ batteries and battery chargers. The phone warranty does not cover damage caused by using non-Motorola batteries and/or battery chargers.
Warning: Never dispose of batteries in a fire because they may explode. Installing the Battery Use only Motorola Original™ batteries and accessories. Store batteries in their protective cases when not in use. Action 1 Remove the battery from its plastic bag 2 If the back cover is on, remove it as described in the procedures.
Action 4 Replace back cover and slide into place until it locks. Charging the Battery using the Travel Charger New batteries are shipped partially charged. Before you can use your communicator, you need to install and charge the battery, as indicated by the following instructions. Some batteries perform best after several charge/ discharge cycles.
Charging the Battery using the Desktop Charging Cradle Action 1 Plug the travel charger, release tab end, into the back of the charging cradle with the release tab up. 2 Plug the other end into an electrical outlet. Turning Your Slide switch Communicator On down for 1...
First Time When you turn on the communicator for the first time, you need to: • Install the A1000 Desktop Suite from the in-box CD. See page 72 for set up and installation procedures. • Select primary and secondary languages •...
Making a Call Action 1 Press A or tap 2 Select a voice or video call by tapping: voice call video call 3 Use the stylus to tap the number you want to dial on the keypad. 4 Press B. 5 Press a to turn on the speakerphone during the call (see page 42).
Using Your Communicator See page 1 for a basic phone diagram. Communicator Display Application Selector Bar Menu Bar Application Space Button Bar Status Bar Application Shows six icons that allow easy to Selector Bar access to commonly used applications. Menu Bar Shows menus for the open application.
Using Touchscreen Control The stylus fits in a compartment on the side of the communicator. Using the stylus, tap once on an icon, text, or on-screen button to select and open an item. Using the 8-way Navigation Key You can press the Navigation navigation key up, down, left, or right to highlight an...
Using the Game Keys Game Key A Game Key B Game Key A and Game Key B These keys are used when you play games on your communication. The action of each key varies depending on the game being played. Tip: You can press Game Key A (A) to open the first (leftmost) menu in the menu bar.
Page 32
The following icons open the communicator applications: Calendar Messaging (see page 81) (see page 50) Calculator Phone (see page 81) (see page 41) Desktop Suite Time (see page 74) (see page 88) Contacts To do (see page 58) (see page 84) Control Panel Browse (see page 66)
Folders Many applications include a group of folders. The current folder name appears on the right side of the menu bar at the top of the screen. You can use folders to organize your entries. For example, you can create separate folders for business and personal entries.
Moving Entry to a Different Folder Action 1 Open the entry. 2 Select a different folder. The entry is moved to the folder. Adding, Renaming, and Deleting Folders Action 1 Tap the current folder, then select Edit folders. 2 To add a new folder, tap Add. To rename a folder, tap Rename.
Page 35
Keyboard Launcher – Tap to display the on-screen keyboard. (The keyboard displays only when the cursor is in a text-entry field.) Alert Mode – Shows the current alert mode: Audio: Vibrate: Silent: The alert mode indicates how the communicator notifies you of an incoming call or message.
Page 36
When not in an active call: Voicemail waiting: Videomail waiting: Note: Videomail may not be offered by all service providers in all geographical areas. Message – Shows that you have a new message and the type of message: Email: SMS: MMS: If an MMS or SMS message sender’s phone number is in your Contact list, the indicator is white.
To turn Airplane mode on or off, tap the indicator, then select the setting you want (see page 49). Signal Strength – Shows the network signal strength. The more bars, the stronger the network signal. Battery Strength – Shows the amount of charge in your battery.
Page 38
(depending on which you used last). If the keyboard , then tap Handwriting in the popup menu. displays, tap Writing spaces Tap to write letters Tap to write numbers Tap to write special characters To write, tap the letter, number, or characters button on the left side of the handwriting pad.
Virtual Keyboard Note: You can use the keyboard only when the screen cursor is in a field that allows you to enter text. To use the on-screen keyboard to type text, tap in the status bar. The handwriting pad or the keyboard displays (depending on which you used last).
Page 40
cannot establish a view of a wide area of open sky. In these cases, the AGPS feature will not work. Such situations include, but are not limited to, the following: • in underground locations • inside of buildings, trains, or other covered vehicles •...
Home Screen The Home screen shows a variety of content. This could be a summary of your appointments, messages, and personal links to content such as news, entertainment, and sports. Displaying the Home Screen The Home screen displays after the startup sequence when you turn on the communicator.
Page 42
Information Snacks – Shows the three most recently received information snacks (headlines). Tap a snack to go to a Web page with more information. Note: See the 3 welcome package for information about information snacks. Personal Information – Shows information you want displayed in your Personal Information section.
Personalizing Home Screen Action 1 Go to the Home screen (if not already shown). 2 Tap Home > Preferences. 3 Tap Events tab. 4 Select up to six items you want displayed in the Personal Information section by tapping the appropriate checkbox.
Calling Features Opening Phone Application Use the Phone application to make voice and video phone calls. You can open this application in the following ways: • Press B. When the Phone application opens, a list of the most recently dialed calls displays. •...
Displaying Your Phone Number Your phone number must be programmed on your USIM card to use this feature. Tap in the Application Selector bar. Tap Phone > My line(s). The communicator shows your phone number(s). Using the Internal Speakerphone Speakerphone To turn on the internal speakerphone during an Speakerphone...
Making a Voice Call Dialing with the Keypad Action 1 Tap in the Application Selector bar or Application Launcher. 2 Select a voice call by tapping ( 3 Tap the phone number on keypad. 4 If you make a mistake while dialing, tap delete the last digit entered.
Making a Video Call to Another Phone You can make a video call to another phone by dialing the phone number on the keypad. Shortcut: You can automatically place video calls to stored phone numbers. Action 1 Tap in the Application Selector bar or Application Launcher.
Action 4 Tap When the call connects, the screen shows the remote camera image on top and the local image on the bottom. Remote image Local image Making a Video Call to a Computer To make a video call to a computer, you can use: •...
• Embedded email address – To call a computer’s email address, tap the address in an email, SMS, MMS, or text message, or an HTML page. Calling an Emergency Number Your service provider may program one or more emergency phone numbers, such as 911 or 112, that you can call under any circumstances, even when your communicator is locked or the USIM card is not inserted.
Page 50
Notes: • This feature can work only if the emergency response center can receive and process location information. If you are concerned about whether your local emergency response center can receive AGPS location information, contact your local authorities. • In order for the AGPS feature to work when making emergency calls, the service must be turned on (see page 32).
Dialing the Call Action 1 Press keypad keys to dial the emergency number. 2 Press B to call the emergency number. Answering Calls When you receive an incoming voice or video call, the communicator rings or vibrates (unless set to Silent mode).
Switching to Airplane Mode If you want to use the commuicator’s personal organization and entertainment features in a situation where telephone use is not allowed (such as on a plane), switch the communicator to Airplane mode. In Airplane mode, you cannot connect to the network to make phone calls or send messages.
Messages and Email You can create, send, and receive email, MMS (Multimedia Message Service), and SMS (Short Message Service) messages. To send stored audio, video, and picture files with your email and MMS messages. See the “News and Entertainment” beginning on page 97. Setting up Messaging Accounts Before you can send and receive messages, you must set up your accounts.
4 Enter information about your account on the Basic, Inbox, Outbox, and Advanced tabs. 5 Tap Done. Note: See the A1000 More Here reference guide on the in-box CD for more information. MMS and SMS Your service provider should already have set up MMS and SMS (text messages) accounts on your communicator.
Action 3 Tap the Email, Text message, Multimedia message, or Info Service tabs to view account settings. Tap the left and right arrows to move between the account tabs. Opening Messaging Application Use the Messaging application to create, send, and receive messages.
Creating and Sending Messages Email and SMS Action 1 Tap the email or SMS account in the list of accounts. 2 Tap Message > New. 3 Tap Text only, Media only, or Text & media, then tap Done. 4 In the To field, enter the recipient’s address (email) or phone number (SMS).
Note: If you accept a video call while composing an email or SMS message, the message is automatically saved to either the email or SMS draft folder. You can create and send MMS messages that contain one or more slides with audio, video, images, and documents. Action 1 Tap the MMS account in the list of accounts.
Page 58
Action 4 In the To field, enter the recipient’s phone number or email address. (The recipient must also subscribe to MMS messaging.) To enter a stored number from Contacts, tap To. To enter several phone numbers, enter a comma between each. 5 Tap to add a sound.
Page 59
Action 8 To set the slide duration, tap the duration label (10/10s). Specify how long (in seconds) you want the slide to play before automatically advancing to the next slide in the message. The first number in the duration label indicates the duration of the current slide.
Receiving and Reading Messages When a new message is received, a message indicator displays in the status bar (see page 31). Action 1 Tap the message indicator in Status bar. The Messaging application opens, showing a list of established accounts. The number of unread messages displays next to each account.
Contact List Use the Contacts application to store details such as names, phone numbers, and email addresses in an alphabetical list of entries. You can call or send a message to any stored contact from this list. Opening Contacts Application in the Application Selector bar or Application Launcher.
To see each contact’s preferred phone number next to their name, tap Edit > Preferences, then tap the Show preferred phone number tab. Adding Contacts Action 1 Open the folder in which you want to save the contact. To store the contact on your USIM card, open the USIM folder.
Page 63
Action Note: If you enter more than one phone number, (for example, a work and home number), you can select which number displays in the contact list as the preferred phone number. To do so, tap Edit > Preferred number, then select the desired preferred phone number from the list.
Action 10 To add a note to a contact, tap , then enter the note. 11 You can mark a note as Private. Private notes are not included when you send or synchronize contact details. 12 To assign a stored photo or image to the contact, , then , then select the photo or image.
Action 3 Tap Add. The Contact Information form displays and (new field) displays next to the added field. 4 Repeat these steps to add more fields. Recording Voice Tags for Contacts You can record a voice tag when adding a new contact (page 59), or when editing a contact (page 64).
Action 3 When prompted, tap Record again and repeat the voice tag. A checkmark (o) in the Voice tag box indicates the voice tag has been recorded. 4 Tap the field next to the Voice tag box, then select Voice call or Video call. 5 Repeat these steps to record additional voice tags for this contact.
Editing Contacts Action 1 Tap in the Application Selector bar or Application Launcher to display your list of contacts. 2 Tap a contact in the list. 3 Tap Edit > Edit Contact. Note: Your changes are automatically saved. Communicating with Contacts You can easily phone, email, or send messages to your stored contacts.
Action A phone number or email address might have additional icons next to it, depending on its defined communication method. 2 Tap the icon for the call or message you want: Voice Call to a phone Video Call to a phone or computer (for phone number contacts) Video Call to a computer (for email address contacts)
Customizing Communicator Settings Setting the Wallpaper Image You can set an image to display in the background of the Application Launcher. Action 1 Open Application Launcher ( 2 Tap View > Appearance. 3 Tap Background and select from the list, or select Find image to select a stored image.
Setting the Screen Calibration Action 1 Open Control Panel application ( 2 Tap Screen from the Handset tab. 3 Tap Calibrate. 4 When prompted, tap the center of points 1, 2, and 3 to calibrate the screen. Press the center of the screen to reset calibration to the factory default setting.
Setting a 3 Key Shortcut The 3 key (E) has 1 default shortcut setting, Browser, and one shortcut that you can customize to open your favorite application, for example, Camera. Action 1 Open Control Panel application ( 2 Tap Shortcut key from the Handset tab. 3 Select an application from the list.
Choosing Ring Tones for Messages Action 1 Open the Messaging application ( 2 Tap Edit > Preferences. 3 Select the ring tones you want for each messaging account. To hear the selected ring tone, tap 4 Tap Done. Choosing a Vibrate Pattern When you set the alert mode to vibrate, the communicator vibrates to indicate an incoming call or message.
Important: Before connecting your communicator to another device such as a computer or Bluetooth device, install the A1000 Desktop Suite, located on the in-box CD. Follow the on-screen prompts for installation instructions. This program enables you to establish a connection with a computer or Bluetooth device to: •...
Connecting a Bluetooth Device Important: Before connecting your communicator to a Bluetooth device, set up the other device as described in its user guide. Action 1 Open Control Panel application ( 2 Tap Connections tab > Bluetooth. 3 Tap the Devices tab, then tap Add. Your communicator searches for all Bluetooth enabled devices in the vicinity.
Changing Your Bluetooth Settings Action 1 Open Control Panel application ( 2 Tap Connections tab > Bluetooth > Settings tab. 3 To turn on Bluetooth, tap the box next to Bluetooth on. A check mark in the box indicates Bluetooth hardware is turned on.
Connecting to a Computer Important: Before connecting your communicator to a computer, ensure the A1000 Desktop Suite, located on the in-box CD has been installed. Setting Up a USB Cable Connection Connect the USB cable from the accessory port on the bottom of the communicator to the USB port on the computer.
Using the Desktop Suite After connecting your communicator to the computer, start the A1000 Desktop Suite program on the computer. Refer to the A1000 Desktop Suite online help for more information about using the program. Using Remote Synchronization The communicator allows you to synchronize Calendar, To Do, and Contract entries over the air (OTA) with a synchronization server.
Configuring the Settings When you have your account information, you can configure the communicator for remote synchronization. Action 1 Tap ( 2 Tap Edit > Settings. 3 Enter the Server address, Username, and Password. 4 Tap Done. 5 Tap on a task you want to enable. 6 Tap Enable task checkbox.
Use Picsel Viewer to open documents from the internet, received messages, and documents stored on your A1000 communicator or personal computer. The stylus and icons allow you to open, scroll, zoom, and navigate through documents with ease.
Navigating Documents Icons on the navigation bar allows you to easily zoom in and out, change views, and move to other pages of the document. Document Options Navigation Icons Navigation Icon Description and Procedure Expand control bar Displays thumbnail images of a document 3 pages at a time.
Page 82
Navigation Icon Description and Procedure Fit to width ( Display a document to the full width of the viewing area. Fit to page ( Display a document to the full width and height of the viewing area. Zoom in ( Increase document size Zoom out ( ) Decrease document size...
Setting Preferences Action 1 Tap Edit > Preferences. 2 Make your selections from the list. Page flick – go to the next or previous page in a document by tapping and sliding the stylus across the bottom of the display. •...
Personal Organizer Features Calendar Use Calendar to schedule and organize events such as appointments and meetings. You can review your schedule of events for the day, week, or month, and have the communicator play a reminder alarm for specific events. Note: Ensure the correct time and date are set before using Calendar (page 88).
Page 85
To add a Calendar entry: Action 1 Open Calendar ( 2 Tap Calendar > New. The Calendar Entry form displays. 3 Use the stylus or virtual keyboard to enter a description. 4 Select the type of entry. 5 Enter the date, time, and location of the event. 6 Tap the Alarm box if you want the communicator to sound a reminder alarm for this entry.
Action 7 If this entry recurs, tap Repeat to select a repeat interval. Check the Forever box to have the alarm repeat indefinitely. 8 To mark this entry as Private when you synchronize Calendar entries with a computer, tap Private. 9 To add a note to the entry, tap , then enter the note.
Moving Entries to the To Do Application You can move Calendar entries to the To Do application, which lists tasks you need to complete. Action 1 Open the entry. 2 Tap Calendar > Move to To do. Notes: To Do entries do not have repeats, times, or locations, so Calendar entries that you move to To Do lose this information.
Adding Entries: Action 1 Open To do ( 2 Tap To do > New. The To Do entry form displays. 3 Use stylus or virtual keyboard to enter a description. 4 Select a priority (1-9, with 1 highest) for the task. 5 Tap the Due date box if you want to this task to have a due date.
Action 6 Tap the Alarm box if you want the communicator to sound a reminder alarm for this entry. The time and date of the alarm displays below the Alarm box. To change the alarm, tap the time or date. 7 To mark this entry as Private when you synchronize To Do entries with a computer, tap Private.
Deleting Entries When you no longer need a record of your completed entries, delete them. Action To delete an individual entry, tap the entry in the list and tap Delete. To delete all completed entries, in your list of entries, tap To do >...
Notes Use Notes to write notes and sketch graphics. Adding Notes Action 1 Open Notes ( 2 Tap Notes > New. 3 Enter the note using the stylus or virtual keyboard. 4 To add a graphic to the note, tap 5 Use the stylus to sketch your graphic.
Setting the Time and Date If you have not already set the current time and date:.: Action 1 Open Time ( ). The Date and Time screen displays: Current city Current time and date Other city time and date Alarm slots 2 Tap Time >...
Setting Location Time can display time and date information for two locations: • Current – The place where you are at the moment. The time and date of your current location display in the top half of the screen. • Other – A city of your choice. The time and date of this city displays below the time and date of your current location.
Setting Alarms You can use Time as an alarm clock. It is ideal for wake-up alarms and other regular alarms you do not want to include in your Calendar or To Do list. You can set up to three alarms in Time. The alarm slots display in the lower half of the Time screen.
Turning Alarm Sounds Off To silence an alarm before it sounds, do one of the following: • Uncheck the alarm slot checkbox. • Tap the alarm slot, then select Silent in Alarm sound. Calculator To open Calculator, tap in the Application Launcher. Use the calculator by tapping the on-screen keys.
Page 96
Tip: Adjust your volume setting for playback. Action 1 Open Voice ( 2 Tap Voice > New Voice note or tap New (at the bottom of the screen). 3 Tap to begin recording. 4 Tap to stop recording. 5 Tap to playback the recording.
Playing a Recording Action 1 Open Voice ( 2 Tap to go to the recording you want to play. 3 Tap to play the recording. Deleting a Recording Action 1 Open Voice ( 2 Tap to scroll to the recording you want to delete, then tap Voice >...
Security Locking and Unlocking Slide up to Communicator lock. Slide down to You can lock the communicator center to so that the touchscreen and unlock. keys do not work. When you lock the communicator, you can still use the B and A keys for incoming phone calls.
Page 99
Action 6 To set a phone lock code, tap Phone Lock > Set lock code. Enter a lock code, then tap Done. Confirm the lock code, then tap Done. Tap the On or Off button for Auto Phone Lock. To delete the code, tap Clear, enter your current code, then tap Done.
News and Entertainment Web Browser The Web browser lets you open Web pages and use Web-based applications (such as on-line banking, shopping, and games) on your communicator. Setting Up Your Internet Account Before you can use the Web browser, you must set up an Internet account (see page 50).
Opening Web Pages Action 1 Tap the bookmark or saved Web page you want to open. 2 Tap Browse > Open new. Enter the Web page address, in the Location field, then tap Open. Note: you can omit the http://. 3 Change the Title if desired, then tap Save.
Saving Web Pages To save a Web page so you can view it later when not connected to the Internet (offline browsing): Action 1 Open the Web page. 2 Tap Browse > Page information. 3 Tap Save and change the Title if desired. Note: You can change the Title before saving the page, if desired, in the Title field.
Music Use Music to listen to the following types of audio files: AU, AMR, MIDI, MP3, and WAV. You can listen to audio files that you downloaded from the Web, received as an email attachment, or stored on the removable memory card.
Note: Audio tracks must be stored in the proper directory on the memory card for you to see and play them in Music. When you copy audio files to the memory card from a computer, ensure that the files are stored in a third- level directory under: Media Files\Audio\ For example, you can store audio files in any of the following directories:...
Page 105
Action 2 While the track plays, you can tap the following buttons at the bottom of the screen: Tap and hold down to rewind the track. Tap to stop playing and return to the start of the track. Tap to switch between play and pause mode.
Managing Music Playlists Music can play all of the tracks in a folder in a sequence that you specify. To specify the sequence, you must edit the folder’s playlist: Action 1 Open the folder containing the tracks you want to play.
Playing a Music Playlist Action 1 Open the desired folder. 2 Tap to switch to the Playlist view 3 Tap to play the highlighted track Select a track by tapping on it. The track automatically starts playing. The Music Player plays the tracks in the sequence you selected.
Page 108
Action 4 While the playlist plays, you can tap the following buttons at the bottom of the screen: Tap and release to start playing from the beginning of the current track or to jump to the beginning of the previous track in the playlist (if already at the start of the current track).
Saving Audio Files When you download an audio file from the Web or open an audio email attachment, the Save Audio File screen displays. To save the file to a folder in the communicator or to the Memory card: Action 1 Tap the down arrow to the left of the filename.
Camera You can use the built-in camera to take still pictures and record video clips. Opening Camera Application in the Application Launcher. When the Camera application opens, a camera viewfinder displays the image viewed by the camera lens. Viewfinder Memory available Camera Mode buttons (Still and Video)
Using the Front and Back Camera Lens You can use the front or back of the camera to take pictures. To switch between the front or the back lens, VGA Camera, Point to Point (P2P) 1.2 Mega Pixel Using the Camera Control Keys You can hold you communicator like you would hold a standard camera to take pictures.
Taking Still Pictures Action 1 Tap to place camera in Still mode. 2 Point the camera lens at the subject. or press C (center key) to take the 3 Tap picture. The picture displays in the viewfinder. or press C (center key) to save the 4 Tap picture.
Recording Video Clips You can use the camera to record a video clip up to 60 seconds long. Action 1 Tap to place camera in Video mode. 2 Point the camera lens at the subject. 3 Press C (center key) and hold for 2 seconds to start recording the video.
Action 4 Press C (center key) and hold for 1 seconds to start the timer. The camera starts counting down from 5 to 0. When it reaches 0, it takes the picture or starts recording. Available Memory Indicator The available memory indicator below the viewfinder shows an estimation of how many more pictures or video clips you can take before the selected folder’s memory is full.
Video Use Video to watch video clips and streaming video and audio from the Web. You can watch video clips that you recorded with the communicator’s camera, downloaded from the Web, received as an email attachment, or stored on the removable memory card. Opening Video in the Application Launcher.
Media Files\Video\ For example, you can store video files in any of the following directories: Media Files\Video\Movie Trailers Media Files\Video\Home Media Files\Video\Unfiled Playing a Video Clip Action 1 In the list of video clips, tap the clip you want to play. The video begins to play in portrait (vertical) view:...
Action 2 While the video plays, you can tap the following buttons at the bottom of the screen: Tap to switch between play and pause mode. Tap to stop the video and return to the beginning. Tap to open the Camera application. Tap to return to the list of video tracks.
Saving Video Clips When you download a video clip from the Web or open a video email attachment, the clip begins playing in Video. You can save the clip to a folder in the communicator or to the memory card. Action 1 Tap Video >...
Pictures Use Pictures to view and edit picture files. You can view pictures that you took with the camera, downloaded from the Web, received as an email attachment, or stored on the removable memory card. Opening Pictures in the Application Launcher. When Pictures opens, it shows small thumbnail pictures of all saved picture files or a list of picture files (depending on the view you selected when Pictures was last open).
Viewing Pictures Action 1 Tap the thumbnail picture or file name you want to view. The picture displays. If the original picture is larger than the display area, it reduces to fit. To see the picture in its original size, tap Pictures >...
Viewing Slideshow You can view all of the pictures in a folder as a slideshow. Action 1 Open the folder with the pictures you want to view. 2 Tap Pictures > View slideshow. The pictures in the folder display in the order listed.
• Add a stamp to the image • Add a frame to the image To edit a picture, select the desired editing function from the Edit menu. See the A1000 More Here reference guide on the in-box CD for more information about editing pictures.
SIM Applications (SimApps) Your USIM card may contain additional applications that process outgoing calls, text messages, and other services. Please contact 3 for additional information. Action 1 Tap SimApps ( in the Application Launcher.
Specific Absorption Rate Data Specific Absorption Rate Data This model phone meets the international standards for exposure to radio waves. Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy.
Page 125
Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines. 1. Additional related information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.
This limited warranty is a consumer's exclusive remedy, and applies as follows to new Motorola Products, Accessories and Software purchased by consumers in the...
Page 127
Accessories, Software or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage.
This warranty extends only to the first consumer purchaser, and is not transferable. What Will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent...
You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase;...
Page 130
Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software.
Page 134
saving video files to 115 menu bar 26 keyboard messages launcher 32 accounts 50 using 36 opening application 52 keys opening attachments 57 camera 108 receiving 57 center select 27 ring tones 69 game 28 sending 53 Hutchison 27 status bar indicator 33 navigation 27 vibrate pattern 69 Power 23...
Page 135
phone number dialing with keypad 43 navigation key 27 storing in contact list 59 network viewing your own 42 status bar indicator 33 Picsel Viewer 100 notes pictures drawing sketches 88 assigning to contacts 61 writing notes 88 opening application 116 slideshow 118 taking with camera 109 opening applications 28...
Page 136
choosing for messages slideshow 118 ringing receiving 57 choosing tones 68 sending 53 turning off 49 status bar indicator 33 roaming snacks 39 status bar indicator 33 sounds, system 67 speakerphone turning on/off 42 using 42 saving status bar 26, 31 audio files 106 storing video files 115...