hit counter script
Huawei TE40 Administrator's Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Conference System
  5. TE40
  6. Administrator's manual

Huawei TE40 Administrator's Manual

Videoconferencing endpoint
Hide thumbs Also See for TE40:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
V100R001C01

Administrator Guide

Issue
01
Date
2013-09-30
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents

Troubleshooting

loading

Related Manuals for Huawei TE40

Summary of Contents for Huawei TE40

  • Page 1: Administrator Guide

    HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint V100R001C01 Administrator Guide Issue Date 2013-09-30 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...

  • Page 3: About This Document

    Before you use the product, refer to the product vendor for version mapping information and to confirm compatibility with other videoconferencing equipment. This document describes how to install, configure, maintain, and troubleshoot the HUAWEI TE40 Videoconferencing Endpoint (TE40 or endpoint for short), HUAWEI TE50 Videoconferencing Endpoint (TE50 or endpoint for short) and HUAWEI TE60 Videoconferencing Endpoint (TE60 or endpoint for short).
  • Page 4 Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues. Issue 01 (2013-09-30) This issue is the first official release. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 5: Table Of Contents

    4.1 Connecting a Display Device ............................. 36 4.2 Configuring a Display Device ............................ 40 4.2.1 Configuring Video Output ............................40 4.2.2 Adjusting the Picture Offset ............................. 47 Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 6 6.8.4 Customizing a Site Template ........................... 92 6.9 Managing Captions ..............................93 6.9.1 Specifying Caption Settings ............................. 94 6.9.2 Creating a Banner or Caption ..........................95 7 Security............................97 Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 7 11.4 Upgrading the Endpoint on Its Web Interface ......................126 12 Troubleshooting ........................127 12.1 Fault Diagnostics ..............................127 12.2 Troubleshooting ..............................130 12.3 Restoring Default Settings ............................140 13 Feature Configuration ......................141 Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 8 A E1/T1 Grounding Criteria ....................... 154 B Technical Specifications ......................155 C Status Icons ..........................159 D Menus ............................162 E Terminology ..........................164 F Acronyms and Abbreviations ....................170 Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 9: Overview

    This document guides you through configuring, managing, maintaining, and troubleshooting the endpoint. When using this document, note the following:  Unless otherwise specified, the descriptions in this document are applicable to the TE40, TE50, and TE60.  Except chapters 9 Embedded Web Management...

  • Page 10: Definition Of An Endpoint Administrator

    Table 1-1 Information to be collected Category Item Description Device Device location Record the endpoint location in information as much detail as possible so the endpoint can be quickly Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 11: Related Documentation

    Spare parts Spare parts List all spare parts (including the spare parts that Huawei can provide) and corresponding procurement methods. List all redundant or temporary Redundant or temporary devices devices in the system, such as standby file servers and database servers.

  • Page 12: Safety Precautions

     While using the device, observe all applicable laws, directives, and regulations, and respect the legal rights of others. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 13 Before cleaning the device, stop using it, disconnect the power supply, and unplug all the cables connected to the device, including the power cable, telephone cable, video cable, audio cable, network cable, and serial cable. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 14  Do not take the wireless device to the operation theater, Intensive Care Unit (ICU), or the Coronary Care Unit (CCU). Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 15 WEEE. By Huawei recycling system, the waste can be handled environmentally and the resource can be recycled and reused fully, which is also...
  • Page 16 Endpoint Administrator Guide 1 Overview Huawei WEEE stratagem in the word. Most of the materials in the endpoint are recyclable, and our packaging is designed to be recycled and should be handled in accordance with your local recycling policies. In accordance with Article 11(2) in Directive 2002/96/EC (WEEE), The endpoints were...
  • Page 17 Cet é quipement est conforme à l'exposition aux rayonnements IC limites é tablies pour unenvironnement non contrô lé . Cet é metteur ne doit pas ê tre Co-placé ou ne Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 18: How To Obtain Help

    Help to display the operation guide. Obtaining Technical Support The Huawei support website is an efficient and real-time communication platform where you can obtain technical documents, submit technical questions, service requests, and troubleshooting questions, and provide feedback on Huawei products. To seek technical help over the Internet, please visit http://enterprise.huawei.com.

  • Page 19: Basic Configuration And Verification

    The endpoint supports sleep mode. You can set its sleep time and automatic startup and shutdown time. 2.1 Powering On or Off the Endpoint After connecting all the required devices, connect the power supply and then power on the endpoint. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 20 Powered off (the power switch is ON, and the endpoint is powered off by pressing on the remote control). Blinking blue once Responding to a remote control operation. Blinking blue four times per Being updated. second Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 21: Using The Wizard

    If a USB flash drive is provided with your endpoint, you can also load the configuration file from the USB flash drive to configure your endpoint. For details, see the HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint V100R001C01 Quick Installation Guide.

  • Page 22: Verifying The Basic Configuration

    Step 2 In the text box, enter the IP address or number of a remote site. Step 3 On the remote control, press to place a call to the remote site. ----End Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 23: Sound Test

    By performing an image test, you can check whether the video input and output of the endpoint is correct. Prerequisites The endpoint has been connected to video sources and a display device. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 24: Power Management

    Never, the endpoint will never automatically enter sleep mode. Wake-on-LAN Specifies whether you can This parameter is not selected by remotely wake up a standby or default. sleeping endpoint by sending Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 25 Sleep. Follow-up Procedure The endpoint wakes up from sleep mode in response to any of the following conditions:  You use the touch panel. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 26 10-second countdown. If you select No, the endpoint will not power off. If you select Yes, or do not select any option within 10 seconds, the endpoint automatically powers off. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 27: Network

    There are two indicators working together to indicate the network connection, as shown in Table 3-1 Table 3-2. Table 3-1 LAN status indicators of the TE40 and TE50 Indicator Status Connection Status The orange indicator blinks. Data is being transmitted. The green indicator turns off each time a frame of data has been transmitted.

  • Page 28: Setting Ip Parameters

    Network Specifies the working mode for the The default value is Auto interface network ports on the endpoint. detection. mode  Auto detection: When accessing the NOTE Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 29 IP address. A subnet mask 255.255.255.0 divides the IP address into a network Obtain the subnet mask from address and a host address. the network administrator. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 30 Subnet mask Obtain the IP address from the address (described in the LAN1 section network administrator. in this table) or the IP address of the gatekeeper (GK) server. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 31: Setting H.323 Parameters

    H.323, your endpoint can only use the called endpoint's IP address. NOTE If you select Enable GK, you must also set GK registration mode, Site number, H.323 ID, and Password. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 32 Specifies whether your endpoint uses a This parameter is selected by Huawei GK. default. If you do not select Huawei GK, some Do not select this parameter if functions, such as Conference Control your endpoint needs to and SiteCall are unavailable on your interwork with other endpoint.

  • Page 33: Setting Sip Parameters

    Specifies whether your endpoint registers This parameter is not selected with server with a SIP server. by default.  If this parameter is selected, an endpoint that registers with a SIP Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 34 Proxy server address, Site number, User name, and Password. Proxy server Specifies the address of the proxy server. Example: 192.168.1.10 address If you set Server address to the SIP Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 35 If you select this option, you can import a root certificate from the Web interface when your endpoint registers with a SIP server. For details, see 9.3.7 Importing a Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 36: Setting Wi-Fi Parameters

    IP Dynamic IP. address. Select Dynamic IP unless  Static IP: The network special network administrator assigns an requirements are imposed. IP address to the Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 37 When prompted, enter the security key or password and select Connect. When the endpoint is connected to the router, the Connection Status changes to ----End Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 38 3-7. Table 3-7 Advanced wireless network parameters Parameter Description Setting SSID Specifies the name of your endpoint's  Default value for the TE40: Number Wi-Fi network. TE40_wifi_ap  Default value for the TE50: TE50_wifi_ap  Default value for the TE60:...

  • Page 39: Connecting To A 4E1 Network

    3.2 Connecting to a 4E1 Network Only the TE60 supports 4E1 functions. To implement video communication over a 4E1-line dedicated network, you must connect the TE60 to the network. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 40: Inserting A 4E1 Interface Card

    4E1 interface card, for your reference only. Figure 3-1 4E1 interface card 1 Captive screw 2 4E1 port (RJ45) 3 Edge connector Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 41: Checking Status Indicators On The 4E1 Ports

    The status indicators on the 4E1 ports can quickly provide information about the current network connection. There are two indicators on the 4E1 port to indicate the network connection, as shown in Table 3-8. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 42: Setting 4E1 Parameters

    4E1 port. To place a as the master clock and the other's point-to-point call, set Clock to slave clock. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 43 100 meters, you can select Long line or Short line. Long line is recommended because it provides a higher sensitivity. Step 2 Select Save. ----End Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 44: Display Device And Camera

    (PTZ) settings. You can easily control the camera by switching between its presets. 4.1 Connecting a Display Device When connecting display devices to the endpoint, choose cables based on the related ports. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 45 The video output formats vary according to port types. Table 4-1, Table 4-2, and Table 4-3 describe the video output ports on the endpoint. Table 4-1 Capabilities of the TE40's video output ports Port Name Port Type Output Default Settings After on the UI...
  • Page 46 2 PC OUT DVI-I DVI, VGA, By default, this port YPbPr, and functions as the auxiliary HDMI output port and is used to Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 47 1MAIN OUT and 2 PC OUT ports if you are using the TE60 and to the 1 MAIN OUT and 2 HDMI OUT ports if you are using the TE50 or TE40. A display device shows the local video when connected to the 1 MAIN OUT port and shows the presentation when connected to the 2 PC OUT port (or 2 HDMI OUT port).

  • Page 48: Configuring A Display Device

    Please use the cables provided with the endpoint. Other cables may not be able to ensure the desired quality. Contact the device supplier to purchase appropriate cables. For the details about how to connect cables, set the HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint V100R001C01 Quick Installation Guide.
  • Page 49 1200), 1920 x 1200 pixels, 720p, and 1080p YPbPr 720p, 1080i, and 1080p 800 x 600 pixels, 1024 x 768 pixels, 1280 x 1024 pixels, UXGA (1600 Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 50 56, 60, 72, 75, or 85 pixels 1024 x 768 60, 70, 75, or 85 pixels 1280 x 1024 60, 75, or 85 pixels UXGA (1600 x Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 51 Specifies the auxiliary output port for The default value of TE60 output port preferentially displaying presentation. is 2 PC OUT. The default value of TE40 or TE50 is 2 HDMI OUT. Do not set Main output interface and Auxiliary output port to the same...
  • Page 52 2 PC OUT port (only TE60) is 2 PC OUT.  The default value for the 2 HDMI OUT port (only TE40 and TE50) is 2 HDMI OUT.  The default value for the 3 VGA OUT port (only TE40 and TE50) is 3 VGA OUT.
  • Page 53 TE60): DVI Table 4-5, and Table 4-6.  2 HDMI OUT port (only for the TE50 and TE40):  3 VGA OUT port (only for the TE50 and TE40):  3 DVR OUT port (only for the TE60): DVI ...
  • Page 54 You can select these three parameters for your needs. video video output ports, except Main output interface and Auxiliary output port. Display Presentation Step 4 Select Save. ----End Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 55: Adjusting The Picture Offset

    The ports to which other video signal sources are connected are unavailable for adjustment. Step 3 Move the slider to adjust the sampling phase. ----End Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 56: Setting Video Parameters

    4 Display Device and Camera 4.2.4 Setting Video Parameters If the endpoint is connected to a Huawei HD camera, you can set the camera video parameters, including the video mode, noise reduction, and video resolution. You can view the video result of your settings on the display device connected to your endpoint.

  • Page 57: Switching Between Screen Layouts

    When the endpoint is not in use in a conference, press on the remote control to switch between the Picture in Picture (PiP) and two-pane modes. When the endpoint is in Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 58: Connecting A Camera

    4.3 Connecting a Camera You can view the video delivered by a camera only after correctly connecting the camera to the endpoint and setting the required video input parameters. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 59 Administrator Guide 4 Display Device and Camera The endpoint supports various camera models, including the HUAWEI VPC600 HD camera (VPC600), HUAWEI VPC620 HD camera (VPC620), ViewPoint C500 HD camera (C500), HUAWEI VPC500 HD camera (VPC500), HUAWEI VPC520 HD camera (VPC520),...
  • Page 60 3 AUX IN HDMI HDMI HD-VI ports are mutually exclusive HD-VI DVI(HW) and Camera and cannot be used HDMI(HW) at the same time. 4 3G-SDI IN Camera None Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 61: Configuring Video Input

    The HD-VI port can only be connected to the HUAWEI VPC600 or VPC620. After connecting this port to the HUAWEI VPC600 or VPC620, you can perform PTZ controls on and supply power to the HUAWEI VPC600 or VPC620 without additional cables.
  • Page 62 For example, to change a wide-screen video to a narrow-screen video, your endpoint crops the left and right edges of the wide-screen Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 63: Selecting And Controlling A Camera

    Choose Advanced Settings > Settings > Video > Common Settings > Video Input. Set Remote control to Allow. Step 1 Press on the remote control. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 64: Setting Camera Presets

    If you have saved camera presets for the endpoint, you can tap a preset number to apply that preset to the camera. To move a selected camera to a camera preset: Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 65 ----End Deleting a Camera Preset To delete a camera preset, select the preset number and press on the remote control. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 66: Microphone And Speaker

    Before connecting the endpoint to an audio input device, you need to know each audio input port so you can make connections quickly and correctly. Table 5-1, Table 5-2, and Table 5-3 describe various audio input ports and their supported audio sources. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 67: Connecting A Vpm220

    Microphone array port VPM220 microphone array PSTN PSTN port PSTN signal 5.1.1 Connecting a VPM220 The endpoint can be used with a HUAWEI VPM220 microphone array (VPM220). Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 68 VPM220 becomes problematic; cascaded VPM220s can help alleviate this problem. Dynamically cascading, connecting, or disconnecting VPM220s will not interrupt a conference. The TE40 and TE50 can be connected to only one VPM220 while the TE60 can be connected to two cascaded VPM220s. Figure 5-1 shows the cascading of VPM220s.
  • Page 69 L: The microphones are used to collect sounds for the left audio channel. R: The microphones are used to collect sounds for the right audio channel. N: No microphone is used. (The Huawei logo on the VPM220 should point to the display device.)

  • Page 70: Connecting A Vpm220W

    5.1.2 Connecting a VPM220W The endpoint can be connected to a HUAWEI VPM220W wireless microphone array (VPM220W) over a Wi-Fi network. The TE50 and TE40 can be connected to only one VPM220W while the TE60 can be connected to one or two VPM220Ws.
  • Page 71  The VPM200W's power adapter is not connected to an AC power supply. For more information, see the HUAWEI VPM220W Microphone Array V100R001 Quick Start Guide and HUAWEI VPM220W Microphone Array V100R001 User Guide. Connecting the VPM220W to the Endpoint TThe endpoint can be connected over a Wi-Fi network to a VPM220W for sound pickup.

  • Page 72: Setting Audio Parameters

    When you adjust this input volume, the volume heard at remote sites is adjusted accordingly. NOTE  If you are using the TE40 or TE50, this parameter is available only when you select the 2 PC IN port as the HDMI input source. ...
  • Page 73  Press the button on the microphone array to enable this function.  Press the microphone button on the remote control to turn on the Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 74: Connecting An Audio Output Device

    Note the following when placing an external speaker:  If you are using a unidirectional microphone, the speaker and microphone must not face one another. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 75: Adjusting The Speaker Volume

    (including PSTN participants such as mobile selected by default. phones) in a a multipoint conference can hear Retain the default value each other. when the endpoint joins a multipoint Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 76: Enjoying Stereo Audio

    In dual-audio-channel mode, stereo effect audio can be enjoyed allowing users to accurately locate the direction from which the sound comes, gaining a true-to-life experience. Background For details about the VPM220, see 5.1.1 Connecting a VPM220. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 77 Step 3 Select Save to return to the Settings screen. Step 4 On the Settings screen, choose Conference > Advanced Settings and set Audio protocol to AAC_LD or HWA-LD. Then, set Audio channels to Two. ----End Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 78: Conference

    6.2 Experiencing an MSUC Conference Huawei videoconferencing systems can be used in the Microsoft Unified Communications (MSUC) environment. Register the endpoint (networked with MSUC) with a Lync Server using SIP. After that, the endpoint can place calls to Lync clients, receive calls from Lync clients, and view Lync clients' online status.

  • Page 79: Experiencing A Dual-Stream Conference

    If two display devices are connected to the endpoint, you can set the endpoint to separately display the video and presentation on the two display devices. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 80: Sharing A Presentation

    1MAIN OUT and 2 PC OUT ports if you are using the TE60 or to the 1 MAIN OUT and 2 HDMI OUT ports if you are using the TE50 or TE40. A display device shows the video when connected to the 1 MAIN OUT port and shows the presentation when connected to the 2 PC OUT port (or 2 HDMI OUT port).

  • Page 81: Experiencing An Msuc Conference

    Layouts. 6.2 Experiencing an MSUC Conference Huawei videoconferencing systems can be used in the Microsoft Unified Communications (MSUC) environment. Register the endpoint (networked with MSUC) with a Lync Server using SIP. After that, the endpoint can place calls to Lync clients, receive calls from Lync clients, and view Lync clients' online status.
  • Page 82 Protocol (TCP) to implement transmission reliability.  UDP: Use the User Datagram Protocol (UDP) to implement transmission with reduced latency.  TLS: Use Transport Layer Security (TLS) to implement transmission Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 83: Joining An Authentication Conference

    A site can join the authentication conference by calling the specified conference access number. Background Figure 6-1 outlines the procedure for joining an authentication conference. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 84 You have obtained the following from the calling party or SMC administrator: video (or audio) authentication conference access number and authentication conference password.  The site has registered with the GK server. Procedure Step 1 Press on the remote control. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 85: Joining An Hd-Video Conference Over An Ims Network

    Borne by the standard IP protocol, IMS uses VoIP applications based on the standard SIP applications of the 3GPP to provide fixed and mobile multimedia services for operators. Integrating MCUs can enhance the functionality of the Huawei IMS HD videoconferencing solution.
  • Page 86 IMS server administrator. Server type Specifies the SIP server type. Set this parameter to Standard.  OCS: Select this option if your endpoint registers with the Microsoft Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 87 Step 3 In the text box, enter the conference unified access number. Step 4 On the remote control, press to initiate the conference. Enter the required authentication information, such as the conference ID and password, as prompted. ----End Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 88: Scheduling A Conference

     To schedule an H.323 conference: − The endpoint is not in use during a conference. − The endpoint has registered with a GK, and the Huawei GK parameter has been selected. For details, see 3.1.3 Setting H.323 Parameters. −...

  • Page 89: Conference Control For A Non-Chair Site

    When chair control rights are revoked, no chair site exists in the conference. Sites in the conference can then request to chair the conference. Only the site that initiates or pays for the conference can revoke chair control rights. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 90: Conference Control For The Chair Site

    After the chair site locks the presentation sharing right of a site, only the site can share its presentation. To enable the other sites to share presentations, unlock the presentation sharing right of the site. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 91 : indicates that the speaker of the site is not muted. You can press to mute the speaker.  : indicates that the speaker of the site is muted. You can press to unmute the speaker. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 92: Continuous Presence

    This function is used to cancel the following operations performed by the chair site:  Broadcast site  Mute Speaker  Mute Microphone  Give floor In discussion mode: Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 93: Recording A Conference

    If you are using a standalone MCU to schedule or initiate a conference, you must select Support recording when setting conference parameters. Procedure Step 1 Select Control Recording from the option bar. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 94: Managing The Address Book

    Specifies whether to use FTPS to encrypt This parameter is selected FTPS data through the SSL and ensure data by default. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 95 If you have not selected this function, select Update on the Address Book screen to update the FTPS or FTP network address book. The downloaded address book is saved in vCard format. The file name extension is vcf. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 96 LDAP Address Book entries by default. in the local address book. If you select this parameter, you must also set Automatic update interval and Local records prevail if duplicates exist. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 97: Managing The Local Address Book

    Background Sites and site groups you add to the local address book are automatically saved to the respective lists on the Address Book screen. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 98 No default value is set for this (URI) of the site, for example, parameter. abcd@huawei.com. NOTE This parameter is available only when Type is set to IP, H.323, or SIP. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 99: Importing And Exporting An Address Book

    This facilitates site information editing. You can also import a modified address book to the endpoint after which the records in the address book are displayed on the address book page. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 100: Customizing A Site Template

    Creating a Site Template Step 1 Log in to the endpoint web interface. Choose Address Book > Site Template. Step 2 Click Create. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 101: Managing Captions

    You can create a caption on your endpoint. In addition, you can share the caption with remote sites during a conference. Your endpoint supports T.140 and non-T.140 captions. Table 6-7 describes the differences between these caption types. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 102: Specifying Caption Settings

    Font color Specifies the foreground color of banners The default color is white. and middle and bottom captions in any of 64 colors. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 103: Creating A Banner Or Caption

    Step 2 Select Save. ----End 6.9.2 Creating a Banner or Caption You can create and preview a banner or caption on your endpoint. Procedure Step 1 Choose Advanced > Utilities. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 104 Step 2 Select Middle Caption, Banner, or Bottom Caption. Step 3 Select New and compose the desired banner or caption. ----End After a banner or caption is created, you can preview, share, or edit it. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 105: Security

    Settings screen must provide the administrator password. Procedure Step 1 Choose Advanced > Settings > Secured > Password. Set the administrator password parameters described in Table 7-1. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 106: Enabling Encryption

    Disable is selected for the remote sites. Step 2 Choose Save. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 107: Supporting Remote Logins

    SSL encryption. transmission security. This parameter is selected by default. When SSL encryption is enabled, the touch panel must use Hypertext Transfer Protocol Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 108 SSH mode are debug and Change_Me respectively. To protect against unauthorized access, change the password at your first login. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 109: Setting The Upgrade Password

    Downloading an Air Content Sharing Client. Procedure Step 1 Choose Advanced > Settings > Security > Air content sharing. Set the air content sharing password described in Table 7-5. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 110 To improve device security, set a password at your first login. Step 2 Choose Save. ----End Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 111: Screen Customization

    The default value is 15%. background image displayed on the remote controlled UI. If you set this parameter to Opaque, the background image is not displayed on Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 112 The default value is 48. offset Set the Fine-tunes the site name's position up or Value range: 0-96. vertical down on the local video. The default value is 48. offset Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 113: Customizing Onscreen Status Icons

    Step 1 Choose Advanced > Settings > Display > Personalize > Select conference controls. Select the conference control functions you want to display on the Conference control screen. Step 2 Select Save. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 114: Customizing The Option Bar

    Step 3 Select the icon you want to move and select Up or Down. To show or hide an icon on the option bar, use the remote control to select or deselect the icon. Step 4 Select OK. ----End Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 115: Embedded Web Management Interface

    9.3 Getting to Know Web Interface Functions The functions provided by your endpoint are reorganized on its web interface so you can conveniently use them with a web browser. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 116: Web Browser

    Start the Firefox. On the menu bar, choose Tools > Options. On the Main tab, select Show the Downloads window when downloading a file. On the Privacy tab, select Accept cookies from sites. Then select OK. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 117: Logging In To The Endpoint Web Interface

    Figure 9-1. Figure 9-1 Home page of the endpoint web interface 1 Menu bar 2 Expand/Collapse 3 Area for displaying your 4 Shortcut bar button site name Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 118: Getting To Know Web Interface Functions

    The Installation page is displayed. Step 2 Select Import/Export Settings. The Import/Export Settings page is displayed. Step 3 Select Export Settings to export or Import Settings to import. ----End Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 119: Importing License Files

    Some functions on your endpoint, such as Wi-Fi and recording, require license files. Prerequisites You have obtained the latest license files. From http://enterprise.huawei.com, you can use your contract number and device serial number to download license files. Background Your endpoint can start properly even when no license file is loaded on it or the existing license file has expired.
  • Page 120 Step 4 (Optional) In the displayed dialog box, enter the password and click Connect. The default password is Change_Me. For details, see 7.5 Setting the Air Content Sharing Password. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 121: Multi-View

    The following procedure uses customizing shortcut bar icons as an example. Procedure Step 1 Log in to the endpoint web interface. Choose System Settings > Display. Step 2 Click the User defined tab. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 122: Accessing The Site Map

    To import a certificate used for SiteCall security, select Multipoint conference certificate. Step 4 Select the certificate you want to import and click Import. Step 5 Click Back when OK is displayed. ----End Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 123: Monitoring The Video

    You can use the virtual remote control on the endpoint web interface to control the endpoint. Log in to the endpoint web interface. Choose Device Control > Use remote control. Click the keys on the virtual remote control to operate the endpoint. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 124: Maintenance

    10.1 Checking the Working Environment Periodically To ensure that your endpoint can function properly, check the working environment periodically. Table 10-1 lists the items to be checked. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 125: Checking The Endpoint Periodically

    SIP, SIP site number, and camera status and uptime.  Call status: includes the line rate, video resolution, video rate (frame rate), presentation resolution, presentation rate (frame rate), audio rate, video packet loss rate, presentation Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 126: Querying System Information

    Logs are sorted by time. You can turn pages to view more entries. To display the details of a log, scroll to the log and select Details. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 127 Each log contains the following information:  Event time  Event level  Endpoint-defined event type  Event details To search for a log, select Query and specify the search criteria. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 128: Upgrading

    On the endpoint web interface, manually upgrade the endpoint or endpoint web set it to upgrade automatically. For details, see 11.4 Upgrading the interface Endpoint on Its Web Interface. Before the upgrade, complete the following: Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 129: Automatic Upgrade

    Enable wireless MIC Specifies whether to automatically This parameter is auto update update an upgradable wireless selected by default. microphone VPM220W after it is connected to the endpoint. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 130: Tool Upgrade

    Step 1 Power on the computer and endpoint. Step 2 Extract the compressed software upgrade package on the computer. Step 3 Run UpgMaster.exe to display the window shown in Figure 11-1. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 131 By default, the path of the te.dat file is displayed in Upgrade File. Step 5 Click shown in Figure 11-1 to display the window as shown in Figure 11-2. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 132 Step 8 In the displayed dialog box, click OK. Step 9 (Optional) In the window shown in Figure 11-1, click Browser and select the tepart.dat file you saved in Step Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 133: Upgrading The Endpoint Using The Bootrom System

    Step 3 Extract the compressed software upgrade package on the computer. Step 4 Run the upgrade program UpgradeTool.exe. The upgrade dialog box is displayed. Step 5 (Optional) Click Browser and select the te.dat file. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 134: Upgrading The Endpoint On Its Web Interface

    Step 2 Click Select File and select the te.dat file on your computer. Step 3 Click Import. The endpoint starts the upgrade. ----End The endpoint automatically restarts when the upgrade is complete. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 135: Troubleshooting

    Choose Advanced > Diagnostics. Use the diagnostics methods available on the displayed Diagnostics screen. Figure 12-1 shows the endpoint diagnostics model. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 136 During a loopback test, your endpoint transmits audio or video data through a channel to simulate actual working conditions and tests whether the output is satisfactory. You can Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 137 If your endpoint is on a private network: In IP address, enter a public IP address. Then select Start. If the test is successful, the gateway settings, NAT address, and IP address of your endpoint are correct. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 138: Troubleshooting

    In this case, the font specified by your 2. Under Appearance on the endpoint cannot be General tab, click recognized. Accessibility. 3. In the Accessibility dialog box, Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 139  A maximum of three reached the limit. SSH connections to the endpoint is allowed. Video Table 12-6 lists the troubleshooting methods for video problems. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 140 Ensure that the mode adopted site is in black and video output port is set by the video output port and white or flickers in the cable in use match each Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 141 Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 142 Dual-screen to Enable. On the camera The camera you want to Access the camera control screen control is not selected. and select the camera you want to Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 143 The microphone at the remote from the display device during site has been muted or the chair the audio test, the problem site has muted this microphone. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 144: Conference Initiation

    If a remote site places a call to your site by site number, it Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 145 Check whether your endpoint can communicate with a public network. If the endpoint cannot, NAT settings Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 146 NAT settings are incorrect. The GK listening port, such as Contact the videoconferencing port 1719, is restricted by the system administrator to resolve network firewall. this problem. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 147: Conference Control

    Table 12-9 Methods for troubleshooting conference control problems Problem Possible Cause Solution While the endpoint A site in the conference is being Ask the chair site to stop Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 148: Restoring Default Settings

    Press and hold the RESET button on the back of the endpoint for about 10 seconds, and the endpoint will be restored to its default settings and restart. After the endpoint is restored to its default settings, its IP address is reset to 192.168.1.1. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 149: Feature Configuration

    13.1 Setting the Number Keys and Power Key on the Remote Control You can set the number keys and power key on the remote control to facilitate your daily use of the endpoint. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 150: Setting The Parameters For Placing And Answering Calls

    Table 13-2. Table 13-2 Parameters for placing and answering calls Parameter Description Setting Answer Mode Specifies how your endpoint handles The default value is incoming calls. Manual. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 151 NOTE If this parameter is set incorrectly, the video quality will be affected or the call might even fail to be set up. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 152: Setting Advanced Conference Parameters

     Smooth: Your endpoint uses a high frame rate to ensure smooth video. Video frame Specifies the frame rate used during The default value is Auto. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 153 Presentation: When the video is switched, the presentation remains unchanged. Only one site in the conference can share a presentation one time.  Live: The presentation viewed by Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 154 Received value for Presentation bandwidth [frame rate] is not -. If this parameter is disabled, the Received value for Presentation bandwidth [frame rate] restores to - Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 155: Setting Snmp Parameters

    Your endpoint communicates with and is remotely managed by the videoconferencing network management system using SNMP. The videoconferencing network management system implements the following:  Configures endpoint settings, including the H.323, SIP. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 156 Trap server NOTE address 3 A trap is an unrequested message that a managed device (for example, an endpoint) sends to a trap server (for example, the SMC) Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 157 Encryption protocol, traps are and special characters. transmitted using plaintext. This parameter is available only when Trap version is set to v3 trap or v3 inform. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 158: Setting Qos Parameters

    The default value is (QoS) network security measure used to Priority. deal with the network latency, congestion, and other issues.  Priority: If you select this option, you Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 159 Fine-tunes network jitter settings if a slight The default value is labial synchronization problem persists 0ms. after the network jitter settings are Value range: 0 ms to adjusted. 300 ms Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 160: Setting Network Diagnostics Parameters

    Diagnostics tool user name and Diagnostics tool password. The default value of Diagnostics tool user name and Diagnostics tool password are admin and Change_Me respectively. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 161: Ports On The Rear Panel

    Figure 14-1 TE40 Figure 14-2 TE50 Figure 14-3 TE60 Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 162: A E1/T1 Grounding Criteria

    The maintenance personnel should check the equipment periodically and replace the ineffective protection unit in time. For questions about grounding the device, contact the device provider for technical support. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 163: B Technical Specifications

    Media stream AES and DES encryption protocol Protocol for H.235, SRTP, and TLS signaling and media stream encryption Call 64 kbit/s-8 Mbit/s Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 164 HDMI/DVI (audio input supported), 1 x DisplayPort (audio input supported), and 1x3G-SDI Output  TE40: 2 x HDMI/DVI (audio output supported) and 1 x VGA/YPbPr  TE50: 2 x HDMI/DVI (audio output supported), 1 x VGA/YPbPr, 1 x 3G-SDI, and 1 x CVBS ...
  • Page 165 Endpoint control by using the camera to forward infrared signals VPM220 and VPM220W microphone arrays The TE40 and TE50 can be connected to only one VPM220 or VPM220W microphone array. The TE60 can be connected to up to two VPM220 or VPM220W microphone arrays.
  • Page 166 (H x W x D) Weight  TE40: 3.9 kg (net weight) and 5.8 kg (gross weight)  TE50: 4.1 kg (net weight) and 6.0 kg (gross weight)  TE60: 4.6 kg (net weight) and 6.8 kg (gross weight)

  • Page 167: C Status Icons

    During a conference, pay attention to the status of these icons to ensure that the relevant operations are performed correctly. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 168 The video input from the camera is shrank or (zooming) enlarged. Poor network Network impairments or packet loss occurs in condition the network where the endpoint is located. see 8.2 Customizing Onscreen Status Icons. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 169 Local site's The chair site mutes the local site's microphone microphone muted so other sites cannot hear the local site. by the chair site Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 170: D Menus

    The Advanced tab on the menu screen is the interface to all the function configuration items of the endpoint. Figure D-1 shows the menu structure. Figure D-1 Menu structure Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 171 HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint Administrator Guide D Menus Only the TE60 supports 4E1 functions. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 172: E Terminology

    4CIF defines a video resolution of 704 × 576 pixels. 4CIF 4SIF 4SIF defines a video with a resolution of 704 × 480 pixels and using progressive scanning. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 173 (body language) of all participants, not just the speaker. delete site Remove a site from the site list. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 174 "Role management and additional media channels for H.3xx-series endpoints". Practical importance of this recommendation is its setting forth a way to have multiple video channels (for example, one for conferencing, another for Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 175 During a conference, a site can hide its video to prevent other sites from viewing the video of the site. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 176 Source Input Format (SIF) defined in MPEG-1, is a video format that was developed to allow the storage and transmission of digital video. 625/50 SIF format (PAL/SECAM) has a resolution of (360 or) 352 x Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 177 XGA, the Extended Graphics Array, is an IBM display standard introduced in 1990. Today, it is the most common appellation of the 1024× 768 pixels display resolution, but the official definition is broader than that. Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 178: F Acronyms And Abbreviations

    Cyclic Redundancy Check Composite Video Base Signal CVBS DHCP Dynamic Host Configuration Protocol Domain Name Server DisplayPort DSCP Differentiated Services Code Point Digital Visual Interface Digital Video Recorder Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 179 Network Time Protocol NTSC National Television Standards Committee Phase Alternating Line PPPoE Point-to-Point Protocol over Ethernet Progressive Segmented Frame Public Switched Telephone Network PSTN Pan/Tilt/Zoom Quality of Service Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 180 Session Initiation Protocol SubMiniature version B connector Secure Shell Scalable Video Coding Super Extended Graphics Array SXGA Video Graphics Array Wireless Fidelity Wi-Fi Wake on LAN YPbPr Issue 01 (2013-09-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

This manual is also suitable for:

Te50Te60

Table of Contents